Firmware Maxtron V15 SPD

Model Name  : V15

Model Brand : MAXTRON

Model Device: V15

AndrVersion : 7.0

BaseBand CPU: MAXTRON

Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932

Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (-)

Cara Flash Mxtron V15 via Research Download

Log Read Firmware Maxtron V15

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

syarat-dan-ketentuan

Firmware Asus Z00UD / ZD551KL Qualcomm 9008

Brand     : asus

ProdName  : WW_Z00T

ProdModel : ASUS_Z00TD

Device    : Z00T

AndroidVer: 5.0.2

Manufact. : asus

QLMxCPU   : MSM8916

DevInfo : MSM8916__asus__asus__ANDR_v5.0.2__ASUS_Z00TD__Z00T__WW_Z00T

Detek di UFI ma CM2 Z00UD = Z00T /Z00TD

Fix Asus Z00UD matot via 9008 bukan Fastboot Mode

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Flash Via UFI Asus Z00UD / ZD551KL HS-9008  atau Download Disini
  2.       Download Rom Flash Via CM2 Asus Z00UD / ZD551KL HS-9008  atau Download Disini
  3.       Tool tested via UFI sama CM2
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Kerja

1. Cara EDL/9008 Silahkan testpoint Asus Z00UD anda, letak test point seperti gambar diatas, baterai tetap dipasang

2. Flash via UFI atau CM2 dongle

3. Buat ROM UFI karena tanpa userdata, bila belum bisa masuk menu silahkan reset abis flash

Penampakan ROM 9008 asus Z00UD

Untitled

Log Read Firmware ASUS Z00UD via UFI

Scanning for Qualcomm HS-USB QDLoader 9008 device…
Download Port: Qualcomm HS-USB QDLoader 9008 (COM3)
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.2, date: 3-25-2016
Initializing…

platform: msm8916, cpu abi: arm64-v8a
manufacturer: asus
board: msm8916, name: WW_Z00T
brand: asus, model: ASUS_Z00TD
build id: LRX22G, version: 5.0.2 Lollipop (LRX22G.WW_user_1.15.40.1238_20160305)
build description: Z00T-user 5.0.2 LRX22G WW_user_1.15.40.1238_20160305 release-keys

Reading gpt_main0 at 0x00000000-0x000043FF size: 17 KiB…  Done.
Reading sbl1 at 0x00004400-0x001443FF size: 1.25 MiB…  Done.
Reading sbl1bak at 0x00144400-0x002843FF size: 1.25 MiB…  Skipped
Reading rpm at 0x00284400-0x003043FF size: 512 KiB…  Done.
Reading rpmbak at 0x00304400-0x003843FF size: 512 KiB…  Skipped
Reading tz at 0x00384400-0x004043FF size: 512 KiB…  Done.
Reading tzbak at 0x00404400-0x004843FF size: 512 KiB…  Skipped
Reading hyp at 0x00484400-0x005043FF size: 512 KiB…  Done.
Reading hypbak at 0x00504400-0x005843FF size: 512 KiB…  Skipped
Reading DDR at 0x00584400-0x0058C3FF size: 32 KiB…  Done.
Reading ssd at 0x0058C400-0x0058E3FF size: 8 KiB…  Done.
Reading sec at 0x0058E400-0x005923FF size: 16 KiB…  Done.
Reading aboot at 0x00592400-0x00A923FF size: 5 MiB…  Done.
Reading abootbak at 0x01000000-0x014FFFFF size: 5 MiB…  Skipped
Reading splash at 0x01500000-0x019FFFFF size: 5 MiB…  Done.
Reading devinfo at 0x01A00000-0x01AFFFFF size: 1 MiB…  Done.
Reading fsg at 0x02000000-0x0217FFFF size: 1.50 MiB…  Done.
Reading fsc at 0x02180000-0x021803FF size: 1 KiB…  Done.
Reading modemst1 at 0x02180400-0x023003FF size: 1.50 MiB…  Done.
Reading modemst2 at 0x02300400-0x024803FF size: 1.50 MiB…  Done.
Reading factory at 0x02480400-0x02E803FF size: 10 MiB…  Done.
Reading factorybak at 0x02E80400-0x038803FF size: 10 MiB…  Done.
Reading asuskey at 0x03880400-0x039803FF size: 1 MiB…  Done.
Reading asuskey2 at 0x03980400-0x03A803FF size: 1 MiB…  Done.
Reading asuskey3 at 0x03A80400-0x03B803FF size: 1 MiB…  Done.
Reading asuskey4 at 0x03B80400-0x03C803FF size: 1 MiB…  Done.
Reading asuskey5 at 0x03C80400-0x03D803FF size: 1 MiB…  Done.
Reading asusgpt at 0x03D80400-0x03E803FF size: 1 MiB…  Done.
Reading asusgpt1 at 0x03E80400-0x03F803FF size: 1 MiB…  Done.
Reading asusgpt2 at 0x03F80400-0x040803FF size: 1 MiB…  Done.
Reading misc at 0x04080400-0x041803FF size: 1 MiB…  Done.
Reading keystore at 0x04180400-0x042003FF size: 512 KiB…  Done.
Reading config at 0x04200400-0x042083FF size: 32 KiB…  Done.
Reading asdf at 0x04208400-0x062083FF size: 32 MiB…  Done.
Reading abootdebug at 0x06208400-0x064083FF size: 2 MiB…  Done.
Reading persistent at 0x06408400-0x065083FF size: 1 MiB…  Done.
Reading oem at 0x07000000-0x08FFFFFF size: 32 MiB…  Done.
Reading boot at 0x09000000-0x0AFFFFFF size: 32 MiB…  Done.
Reading recovery at 0x0B000000-0x0CFFFFFF size: 32 MiB…  Done.
Reading persist at 0x0D000000-0x0EFFFFFF size: 32 MiB…  Done.
Reading asusfw at 0x0F000000-0x0FFFFFFF size: 16 MiB…  Done.
Reading modem at 0x10000000-0x13FFFFFF size: 64 MiB…  Done.
Reading ADF at 0x14000000-0x15FFFFFF size: 32 MiB…  Done.
Reading APD at 0x16000000-0x22FFFFFF size: 208 MiB…  Done.
Reading cache at 0x23000000-0x24FFFFFF size: 32 MiB…  Done.
Reading system at 0x25000000-0xE4FFFFFF size: 3 GiB…  Done.
Files saved to \\%BACKUPS%\ASUS\ASUS_Z00UD(ZD551KL)\Z00T-user%205.0.2%20LRX22G%20WW_user_1.15.40.1238_20160305%20release-keys\

Log Flash Asus Z00UD mode 9008 via CM2

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0563791F
ID_BLOCK_E : 11112222
ID_BLOCK_L : 9804CD17002B1797819FA1BA47D9326D
ID_BLOCK_L : 58A3C03C622893406757A59F4E44AF42
Pickup loader from firmware package
Loader Sent! Initializing …
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Flash Chain : 48
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : sec.dat
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : splash.img
Flashing : misc.img
Flashing : asdf.bin
Flashing : abootdebug.bin
Flashing : boot.img
Flashing : recovery.img
Flashing : persist.img
Flashing : NON-HLOS.bin
Flashing : cache.img
Flashing : system.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data …

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:04:50

Reconnect Power/Cable!

syarat-dan-ketentuan

Firmware StrawBerry ST7701 PAC

Model Name  : sp7731g_1h10_hd_oversea

Model Brand : ST7701

Model Device: ST7701

AndrVersion : 6.0

BaseBand CPU: SP7731GEA_HDR

Project Ver : FS066_CF8_LS019_ST7701_L12819_16B

Model Ext   : ST7701

Tool & Bahan :

  1. Download Firmware PAC Strawberry ST 7701 FS066_CF8_LS019_ST7701_L12819_16B  atau Download Disini
  2. Download Firmware PAC Strawberry ST 7701  SP7731GEA_HDR_ST7701_6.0_LS019_INDB_V02 atau Download Disini
  3. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4. Tutorial Flash via research here
  5. Driver SPD by InfinityBox
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume +-

Cara Flash Strawberry ST7701 via Research Download


 

Log Read Firmware Strawberry ST7701

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1555 MiB
Saved to : E:\STRAWBERRY\New folder\SP7731GEA_HDR_ST7701_6.0_FS066_CF8_LS019_ST7701_L12819_16B_ST7701\
Done!

syarat-dan-ketentuan

Firmware Flash & BYPASS FRP Mito A67


FRP Mito A67 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx
Model Name : sp7731c_1h10_oversea

Model Brand : A67

Model Device: sp7731c_1h10

AndrVersion : 6.0

BaseBand CPU: SP7731CEA

Project Ver : MRA58K release-keys

Model Ext : A67
BAHAN :
A. BYPASS FRP ONLY ukuran PAC 1 MB

B. Firmware PAC FULL

Tool :

  • 1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    2. Tutorial Flash via research here
    3. Driver SPD by InfinityBox
    4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • 1. Untuk FRP Mito A67 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
    2. Boot volume (+)
    3. Sinyal Aman

Cara Flash Bypass FRP Mito A67 via Research download

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

==== Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : sp7731c_1h10_oversea
Model Brand : A67
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext : A67

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_360x640.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2147 MiB
Saved to : E:\mito\mito a67\v05\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_A67\
Done!

Elapsed: 00:15:13

 

syarat-dan-ketentuan

BYPASS FRP & FLASH HIMAX M22i


FRP Himax M22i Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx
Brand : HIMAX

ProdName : M22i

ProdModel : M22i

Device : M22i

AndroidVer: 6.0

MTKxCPU : MT6737M

MTKxPRJ : AG167_DAG1671_HIMAX-M22i_L102
L101=L102
Bahan :

1. Download Bypass FRP Only

Download Rom Himax M22i Bypass FRP Only atau Download Disini (1MB)

2. Download Firmware Full

MT6737M__HIMAX__M22i__6.0__AG167_DAG1671_HIMAX-M22i_L102

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5. Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Bypass Frp Himax M22i via Flash Tool

Log Read Firmware Himax M22i

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 6 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238F91F0042F31C7090
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D42001FF9907093F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xFCC4CFBD4FD8B14C030659A9807D76D0
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand : HIMAX
ProdName : M22i
ProdModel : M22i
Device : M22i
AndroidVer: 6.0
MTKxCPU : MT6737M
MTKxPRJ : AG167_DAG1671_HIMAX-M22i_L102

[Read Ok] : preloader_ag167.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / ag167 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3233 MiB
Scatter saved to : D:\himax\m22i\New folder\MT6737M__HIMAX__M22i__M22i__6.0__AG167_DAG1671_HIMAX-M22i_L102\

All done!

syarat-dan-ketentuan

BYPASS FRP & Flash Mito A17

BYPASS FRPMito A17 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Model Name  : MITO_A17

Model Brand : MITO

Model Device: MITO_A17

AndrVersion : 7.0

BaseBand CPU: SP9832A_2H11_VOLTE

CompileDate : 12/1/2017 2:54:45 AM

Project Ver : MITO_A17_01122017_V12

Model Ext   : MITO A17

A. BYPASS FRP ONLY ukuran PAC 1 MB

  1. Download Firmware PAC Mito A17_V12_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. Firmware PAC FULL

  1. Download PAC SC983XAndroid_UDC_TOS_MITO_A17_V_12 atau Download disini

Tool :

  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Untuk FRP Mito A17 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
  • Boot volume (+/-)
  •  Sinyal Aman

Cara Bypass Mito A17  via Research Download

Log Read Info Firmware Mito A17

 Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : MITO_A17
Model Brand : MITO
Model Device: MITO_A17
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
CompileDate : 12/1/2017 2:54:45 AM
Project Ver : MITO_A17_01122017_V12
Model Ext   : MITO A17

ExtraInfo : HWInfo exists!!! This phone have DYNAMIC HW settings!!!

sumber : https://kangsuper.blogspot.com/2018/08/bypass-frp-flash-mito-a17-fast-simple.htmlsyarat-dan-ketentuan

Bypass Micloud & Flash Mi max 2016001, 2016002, 2016006, 2016007

Untitled

Diatas gambar letak testpoint Mi Max

Lock Micloud Mi max ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Rom ini buat  BI / Bahasa Indonesia, UNLock Micloud (Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx )

Device Brand : Xiaomi
Device Manufact.: Xiaomi
Device Model : hydrogen
Device CPU : MSM8952
Device IntName : hydrogen
Device Version : 6.0.1
CU_SWVer : Xiaomi
Device Compile : 12/30/2016 11:14:33 AM
Device ExtInfo : MI MAX

 

BAHAN :

  1. Rom Flash via MIFLASH BYPASS Mi_MAX_32GB Hydrogen_Global_V8.0.1.0 download disini atau disini
  2. Rom Flash via MIFLASH BYPASS Mi_MAX_32GB Hydrogen_Global_V8.2.1.0 download disini atau disini
  3. Rom Flash via MIFLASH BYPASS Mi_Max_64GB_and_128GB Helium_Global_V8.2.1.0 download disini atau disini
  4. Download Tool dan Driver buat Flash DOWNLOAD DISINI atau Download Disini
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Langkah Kerja :

– Extrak file dan install tool dan driver (tested on WIN- 64BIT)

– Konek Test Poin pada Gambar diatas,  kemudian colok kabel usb, terdetek di pc, hs-9008

Cara Flash Mimax sama dengan Flash xiaomi redmi lain, cek video dibawah

Operation : Identify Mi max[ v1.16 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 652 [MSM8976]
ID_BLOCK_S : 010F41A4
ID_BLOCK_L : BAE76442EAF92F720355E3A236A4547B
ID_BLOCK_L : D9275DF43B1234EA9574AD98E75783C6
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8976 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : AJNB4R
Boot Ok!
Brand : Xiaomi
ProdName : hydrogen
ProdModel : MI MAX
Device : hydrogen
AndroidVer: 6.0.1
Manufact. : Xiaomi
SysPatch : MMB29M
DevComTime: 5/31/2016 6:13:44 AM
QLMxCPU : MSM8952
USERData : ENCRYPTED
GCSec : NORMAL
Done!

syarat-dan-ketentuan