REPAIR LENOVO A706 Qualcomm HS-USB QDLoader 9008

REPAIR LENOVO A706 TERDETEK HS-USB 9008

PASS : kangsuper.blogspot.co.id

1. TOOL PAKE QPST (Saya pake QPST2.7.422)
2. FIRMWARENYA DOWNLOAD DISINI

CARA PERHATIKAN GAMBAR

 QPST eMMC software download

NOTE :
– Saya Pernah punya A706 yg terdetek 9006 malah gak bisa, kmdian saya flash RAW pake ROADKILL disk image, man ambil file boot kemudian recovery, saya write-kan satu per satu, terus kedetek 9008, terus saya flash pake QPST eMMC software download. malah langsung done.

– Setelah klik download PROSES SAMPAI KELUAR BAR PROGRESS 2-3MNT KAYAK HANG, ditunggu aja

BUAT YG SUDAH SUKSES KIRIM PULSA KE

INDOSAT= 0856-0140-2081
atau
3 = 0896-1384-0593

PULSA 5K ATAU 10K DITERIMA

MAAF YG GAK NIAT MAU KIRIM PULSA JGN DOWNLOAD CARI YG LAIN AJA, NTAR GAK BERKAH, DISINI SAYA CARI UANG/KERJA, BUKAN MENGEMIS. THX

FIRMWARE OPPO R1011 FLASH TOOL

FLASH OPPO R1011 FLASH via FLASH TOOL
STOCK ROM OPPO R1011 FLASH via SP FLASH TOOL

Buat yg bootloop atau kena virus, atau malah matot.

BUAT YG SUDAH SUKSES KIRIM PULSA KE

3 = 0896-1384-0593
PULSA 5K ATAU 10K DITERIMA

PASS : oppor1011ex

STOCK ROM OPPO R1011 FLASH via SP FLASH TOOL

Buat yg bootloop atau kena virus, atau malah matot.

  1.  Download firmware STOCK ROM OPPO R1011
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya, (oppo preloader)
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  JANGAN PENCET TOMBOL APAPUN, COLOK KABEL DIAMKAN, KALAU TETEP GAK JALAN PECET VOLUME+ BARU TANCEP KABEL
  6.  RESET AFTER FLASH (VOL- ON)

PASS : oppor1011ex
FLASH OPPO R1011 VIA FLASH TOOL

STICKER BODY

FLASH OPPO R1011 FLASH via FLASH TOOL
Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : OPPO
Device Model   : R1011
Device CPU     : MT6572
Device IntName : R1011
Device Version : 4.4.2
Device Compile : 4/24/2015 12:40:57 PM
Device Project : R1011EX_11_A.04_150424
Device ExtInfo : R1011


Modem Version : OPPO72_hspa_15077
Localization  : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB
DisplayRes    : 800 x 480

Supported LCD :
HT_WVGA_13033

Supported DGT :
gt9xx_13076

Supported CAM :
s5k5cagx_yuv
hi704_yuv
s5k5catruely_yuv
hi351_yuv

Supported BootLoader HW :
FlashID [0] CID : FE014E50314A39344C , Name : P1J94L , Vendor : FE , [MICRON]
FlashID [1] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [2] CID : 110100303034473930 , Name : 004G90 , Vendor : 11 , [TOSHIBA]
FlashID [3] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
Start  at : [2/27/2016 / 11:42:15 AM]
Operation : Read Flash [ v1.41 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 9 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50314A39344C12681725CC129F
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , L49J1
[eMMC] : FLASH_CID : FE014E50314A39344C12681725CC129F
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9800000
[eMMC] : FLASH_UCP : 3736 MiB [eMMC 4 GiB]
DEV RID    : 72AF94150C38AF266CDC14EAC4F3CE07
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : OPPO
ProdName  : R1011
ProdModel : R1011
Device    : R1011
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : R1011EX_11_A.04_150424

[Read Ok] : preloader_oppo72_15077.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / oppo72_15077 / EMMC
Android Info saved
FW Size : 1353 MiB
Scatter saved to : F:\ANDRO2\OPPO\R1011\MT6572__OPPO__R1011__R1011__4.4.2__R1011EX_11_A.04_150424\

All done!

Done!
Elapsed: 00:06:07
Reconnect Power/Cable!

Finish at : [2/27/2016 / 11:48:23 AM]

SCATTER OPPO R1011 MT6572_Android_scatter.txt

######################################-=INFINITY-BOX=-######################################################
#
#  General Setting
#
####################################-=CHINESE II MIRACLE=-#####################################################
– general: MTK_PLATFORM_CFG
  info:
    – config_version: V1.1.1
      platform: MT6572
      project: oppo72_15077
      storage: EMMC
      boot_channel: MSDC_0
      block_size: 0x20000
############################################################################################################
#
#  Layout Setting
#
############################################################################################################
– partition_index: SYS0
  partition_name: PRELOADER
  file_name: preloader_oppo72_15077.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0xC00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x00

– partition_index: SYS1
  partition_name: MBR
  file_name: MBR
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0xC00000
  physical_start_addr: 0xC00000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS2
  partition_name: EBR1
  file_name: EBR1
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0xC80000
  physical_start_addr: 0xC80000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS3
  partition_name: PRO_INFO
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xD00000
  physical_start_addr: 0xD00000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS4
  partition_name: NVRAM
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1000000
  physical_start_addr: 0x1000000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x00

– partition_index: SYS5
  partition_name: PROTECT_F
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1500000
  physical_start_addr: 0x1500000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS6
  partition_name: PROTECT_S
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1F00000
  physical_start_addr: 0x1F00000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS7
  partition_name: SECCFG
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x2900000
  physical_start_addr: 0x2900000
  partition_size: 0x20000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS8
  partition_name: UBOOT
  file_name: lk.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2920000
  physical_start_addr: 0x2920000
  partition_size: 0x60000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS9
  partition_name: BOOTIMG
  file_name: boot.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2980000
  physical_start_addr: 0x2980000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS10
  partition_name: RECOVERY
  file_name: recovery.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3380000
  physical_start_addr: 0x3380000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS11
  partition_name: SEC_RO
  file_name: secro.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3D80000
  physical_start_addr: 0x3D80000
  partition_size: 0x40000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS12
  partition_name: MISC
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3DC0000
  physical_start_addr: 0x3DC0000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS13
  partition_name: LOGO
  file_name: logo.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3E40000
  physical_start_addr: 0x3E40000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS14
  partition_name: OPPO_CUSTOM
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x4140000
  physical_start_addr: 0x4140000
  partition_size: 0x100000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS15
  partition_name: EXPDB
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x4240000
  physical_start_addr: 0x4240000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS16
  partition_name: ANDROID
  file_name: system.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x4C40000
  physical_start_addr: 0x4C40000
  partition_size: 0x51400000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS17
  partition_name: CACHE
  file_name: cache.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x56040000
  physical_start_addr: 0x56040000
  partition_size: 0xE200000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS18
  partition_name: USRDATA
  file_name: userdata.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x64240000
  physical_start_addr: 0x64240000
  partition_size: 0x843C0000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS19
  partition_name: BMTPOOL
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF00A8
  physical_start_addr: 0xFFFF00A8
  partition_size: 0x1500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00

FLASH ASIAFONE AF9889 via FLASH TOOL

Brand     : AF9889
ProdName  : AF9889
ProdModel : AF9889
Device    : AF9889
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

FLASH ASIAFONE AF9889 MT6572 via FLASH TOOL

Bahan :

  1.  Download firmwarenya STOCK ROM ASIAFONE AF9889
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

FLASH AF9889 via SPFT

LOG READ INFO AF9889 via CM2
Start  at : [1/27/2016 / 10:33:38 PM]
Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D42019204E4075149
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42019204E4075149
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : AF9889
ProdName  : AF9889
ProdModel : AF9889
Device    : AF9889
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

EXTRA :
LCD [0] : nt35512_dsi_vdo_hongsheng
LCD [1] : ili9806e_dsi_vdo_wqx
LCD [2] : otm8018b_dsi_vdo_s4501_xinqi
LCD Res : 854×480
TOUCH [0] : ft6306_s4501
CAM [0] : ov5645_mipi_yuv
CAM [1] : s5k4ecgx_mipi_yuv
CAM [2] : gc2035_yuv_s4501
CAM [3] : gc0329_yuv_s4501
CAM [4] : gc0328_yuv
CAM [5] : gc2035f_yuv
MODEM : mtk72_wet_jb3_hspa_p17
LOCALE : zh_CN en_US es_ES zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR af_AF am_ET be_BY bg_BG bn_IN ca_ES da_DK et_EE fa_IR fi_FI hi_IN hr_HR ja_JP lt_LT lv_LV nb_NO pl_PL rm_CH sl_SI sk_SK sr_YU sw_TZ sv_SE uk_UA ur_PK zu_ZA hdpi

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

Finish at : [1/27/2016 / 10:33:46 PM]


LOG READ FIRMWARE AF9889 via CM2
Start  at : [1/27/2016 / 10:43:37 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D42019204E4075149
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42019204E4075149
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : AF9889
ProdName  : AF9889
ProdModel : AF9889
Device    : AF9889
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

[Read Ok] : preloader_s4501_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / s4501_jb3 / EMMC
FW Size : 680 MiB
Scatter saved to : G:\andro3\asiafone af9889\MT6572__AF9889__AF9889__AF9889__4.2.2__ALPS.JB3.MP.V1.6\

All done!

Done!
Elapsed: 00:03:28
Reconnect Power/Cable!

Finish at : [1/27/2016 / 10:47:05 PM]

INFO AF9889 SCATTER

######################################-=INFINITY-BOX=-######################################################
#
#  General Setting
#
####################################-=CHINESE MIRACLE=-#####################################################
– general: MTK_PLATFORM_CFG
  info:
    – config_version: V1.1.1
      platform: MT6572
      project: s4501_jb3
      storage: EMMC
      boot_channel: MSDC_0
      block_size: 0x20000
############################################################################################################
#
#  Layout Setting
#
############################################################################################################
– partition_index: SYS0
  partition_name: PRELOADER
  file_name: preloader_s4501_jb3.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0x880000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x00

– partition_index: SYS1
  partition_name: MBR
  file_name: MBR
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x880000
  physical_start_addr: 0x880000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS2
  partition_name: EBR1
  file_name: EBR1
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x900000
  physical_start_addr: 0x900000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS3
  partition_name: PRO_INFO
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x980000
  physical_start_addr: 0x980000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS4
  partition_name: NVRAM
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xC80000
  physical_start_addr: 0xC80000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x00

– partition_index: SYS5
  partition_name: PROTECT_F
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1180000
  physical_start_addr: 0x1180000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS6
  partition_name: PROTECT_S
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1B80000
  physical_start_addr: 0x1B80000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS7
  partition_name: SECCFG
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x2580000
  physical_start_addr: 0x2580000
  partition_size: 0x20000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS8
  partition_name: UBOOT
  file_name: lk.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x25A0000
  physical_start_addr: 0x25A0000
  partition_size: 0x60000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS9
  partition_name: BOOTIMG
  file_name: boot.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2600000
  physical_start_addr: 0x2600000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS10
  partition_name: RECOVERY
  file_name: recovery.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2C00000
  physical_start_addr: 0x2C00000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS11
  partition_name: SEC_RO
  file_name: secro.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3200000
  physical_start_addr: 0x3200000
  partition_size: 0x40000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS12
  partition_name: MISC
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3240000
  physical_start_addr: 0x3240000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS13
  partition_name: LOGO
  file_name: logo.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x32C0000
  physical_start_addr: 0x32C0000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS14
  partition_name: EXPDB
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x35C0000
  physical_start_addr: 0x35C0000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS15
  partition_name: ANDROID
  file_name: system.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x3FC0000
  physical_start_addr: 0x3FC0000
  partition_size: 0x28A00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS16
  partition_name: CACHE
  file_name: cache.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x2C9C0000
  physical_start_addr: 0x2C9C0000
  partition_size: 0x17800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS17
  partition_name: USRDATA
  file_name: userdata.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x441C0000
  physical_start_addr: 0x441C0000
  partition_size: 0x52C00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS18
  partition_name: FAT
  file_name: fat.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x96DC0000
  physical_start_addr: 0x96DC0000
  partition_size: 0x515C0000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS19
  partition_name: BMTPOOL
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF00A8
  physical_start_addr: 0xFFFF00A8
  partition_size: 0x1500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00

FLASH ADVAN T1S build no : P7021/V2.0/KK4.4.2

Flash advan tablet T1S build no : P7021/V2.0/KK4.4.2
  1.  Download firmwarenya STOCK ROM ADVAN TABLET T1S V12
  2. Download firmwarenya STOCK ROM ADVAN TABLET T1S V15
  3.  Download Flash Toolnya DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  6.  SCATTER AJA
  7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
pic log read advan t1s via cm2
 about advan t1s
 advan tablet T1S build no : P7021/V2.0/KK4.4.2
 LOG READ AND INFO ADVAN TABLET T1S VIA CM2
advan tablet T1S build no : P7021/V2.0/KK4.4.2
 Start  at : [2/21/2016 / 10:58:02 PM]

Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4E0301886472614308AA3520DF82600B
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642035AA080B6082DF
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1S
Device    : advan89_6833
AndroidVer: 4.4.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.KK1.MP5.V1.25

MODEM :
BaseBand  : MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V50_P1_1_3g_n

EXTRA :
LCD [0] : KR070IG1T
LCD Res : 600×1024
TOUCH [0] : GT9XX
CAM [0] : gc0329_yuv
CAM [1] : gc0312_yuv
MODEM : miki89_tb_kk_md1_hspa_850_1900_2100_vanchip
LOCALE : in_ID en_US zh_CN zh_TW en_IN fr_FR it_IT es_ES et_EE de_DE nl_NL cs_CZ pl_PL ja_JP zh_HK ru_RU ko_KR nb_NO es_US da_DK el_GR tr_TR pt_PT pt_BR rm_CH sv_SE bg_BG ca_ES en_GB fi_FI hi_IN hr_HR hu_HU iw_IL lt_LT lv_LV ro_RO sk_SK sl_SI sr_RS uk_UA vi_VN tl_PH ar_EG fa_IR th_TH sw_TZ ms_MY af_ZA zu_ZA am_ET en_XA ar_XB fr_CA km_KH lo_LA ne_NP mn_MN hy_AM az_AZ ka_GE

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!

Finish at : [2/21/2016 / 10:58:11 PM]



Start  at : [2/21/2016 / 11:22:28 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4E0301886472614308AA3520DF82600B
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642035AA080B6082DF
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1S
Device    : advan89_6833
AndroidVer: 4.4.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.KK1.MP5.V1.25

[Read Ok] : preloader_advan89_6833.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / advan89_6833 / EMMC
FW Size : 932 MiB
Scatter saved to : G:\andro3\ADVAN\advan tab t1s\MT6589__ADVAN__T1S__advan89_6833__4.4.2__ALPS.KK1.MP5.V1.25\




SCATTER ADVAN T1S

PRELOADER 0x0

{
}
MBR 0x1000000
{
}
EBR1 0x1080000
{
}
__NODL_PMT 0x1100000
{
}
__NODL_PRO_INFO 0x1500000
{
}
__NODL_NVRAM 0x1800000
{
}
__NODL_PROTECT_F 0x1D00000
{
}
__NODL_PROTECT_S 0x2700000
{
}
__NODL_SECCFG 0x3100000
{
}
UBOOT 0x3120000
{
}
BOOTIMG 0x3180000
{
}
RECOVERY 0x4180000
{
}
SEC_RO 0x5180000
{
}
__NODL_MISC 0x5780000
{
}
LOGO 0x5800000
{
}
EBR2 0x5B00000
{
}
__NODL_EXPDB 0x5B80000
{
}
ANDROID 0x6580000
{
}
CACHE 0x46580000
{
}
USRDATA 0x4E380000
{
}
__NODL_FAT 0x10E380000
{
}
__NODL_BMTPOOL 0xFFFF00A8
{
}

FLASH OPPO R1001 BLUE SCREEN

FLASH OPPO R1001 BLUE SCREEN

Biasanya ini terjadi abis diflash, kemudian muncul blue screen atau blank biru atau malah layar acak. Flashing sebenarnya tinggal mencari file LK atau uboot yg cocok, sehingga gambar akan muncul kembali, tetapi kadang kala juga butuh dilakukan full flash. JANGAN CENTANG PRELOADER DALAM FLASHING.
Syarat yg LK rusak :
1. Layar biru atau muncul tulisan oppo kemudian rusak
2. Ada nadanya atau loading suara dering OPPO
3. bisa stand by, klo dipencet power atau kunci hidup lagi (pokoknya kayak lcd rusak)

contoh layar biru atau blue screen

contoh muncul tulisan oppo kemudian rusak

  
  1.  Download FILE LK SAJA
  2.  Download File STOCK ROM OPPO R1001 REPAIR BLUESCREEN
  3.  Download Flash Toolnya DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  6. ABIS FLASH SILAHKAN DIFORMAT USER DATA & CHACHE (VOL- POWER ON)
pass : oppor1001bluescreen
  
VIDEO FLASHINGNYA DISINI
 Flash LK dulu
 KLO GAMBAR SEPERTI GAMBAR CONTOH KE 2 BARU FULL FLASH, TP JANGAN CENTANG PRELOADER, ABIS FLASH SILAHKAN DIFORMAT USER DATA & CHACHE (VOL- POWER ON)
 LOG READ CM2
Lihat perbedaan di sticker back casing

Start  at : [2/19/2016 / 11:04:11 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040500A29468B143
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x20000000
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040500A29468B143
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …
USBDL : Init HSUSB Ok!

Brand     : OPPO
ProdName  : OPPO72_13076
ProdModel : R1001
Device    : OPPO72_13076
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : R1001_11_A.03_140507

[Read Ok] : preloader_oppo72_13076.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / oppo72_13076 / EMMC
FW Size : 935 MiB
Scatter saved to : G:\andro3\OPPO\1001 blue screen\backup ok\MT6572__OPPO__R1001__OPPO72_13076__4.2.2__R1001_11_A.03_140507\

All done!

Done!
Elapsed: 00:04:34
Reconnect Power/Cable!

Finish at : [2/19/2016 / 11:08:46 PM]

FIRMWARE MITO T979 FLASHTOOL

Brand     : MITO_T979
ProdName  : MITO_T979
ProdModel : MITO T979
Device    : MITO_T979
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : MITO_T979_20140721_VERSION_T10
MODEM :
BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V23_1_wg_n

  1.  Download firmwarenya STOCK ROM MITO TAB T979
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log Read Firmware Mito T979

Chinese Miracle II  [MTK module] v 1.40
Start  at : [2/10/2016 / 9:23:28 PM]
Operation : Check / Read Info [ v1.40 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728346B6E5251F1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D30344728346B6E5251F1
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
[AP] : Initial info read Ok!
Brand     : MITO_T979
ProdName  : MITO_T979
ProdModel : MITO T979
Device    : MITO_T979
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : MITO_T979_20140721_VERSION_T10
MODEM :
BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V23_1_wg_n
EXTRA :
LCD [0] : hx8664
LCD Res : 480×800
TOUCH [0] : gslx680
CAM [0] : gc2035_mipi_yuv
CAM [1] : gc0310_yuv
CAM [2] : gc0329_mipi_yuv
MODEM : j520.b1b2b5
LOCALE : in_ID en_US  zh_CN  hdpi
Done!
Elapsed: 00:00:12
Reconnect Power/Cable!
READ
Start  at : [2/10/2016 / 9:39:11 PM]
Operation : Read Flash [ v1.40 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728346B6E5251F1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D30344728346B6E5251F1
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now …
Brand     : MITO_T979
ProdName  : MITO_T979
ProdModel : MITO T979
Device    : MITO_T979
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : MITO_T979_20140721_VERSION_T10
[Read Ok] : preloader_joya72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img
[ScatCFG] : MT6572 / V1.1.1 / joya72_wet_jb3 / EMMC
FW Size : 678 MiB
Scatter saved to : G:\andro3\mito\MITO_T979_MT6572_4.2.2__20140721_VERSION_T10\
All done!
Done!
Elapsed: 00:03:29
Reconnect Power/Cable!






SCATTER MITTO T979 MT6572_Android_scatter.txt


######################################-=INFINITY-BOX=-######################################################
#
#  General Setting
#
####################################-=CHINESE MIRACLE=-#####################################################
– general: MTK_PLATFORM_CFG
  info:
    – config_version: V1.1.1
      platform: MT6572
      project: joya72_wet_jb3
      storage: EMMC
      boot_channel: MSDC_0
      block_size: 0x20000
############################################################################################################
#
#  Layout Setting
#
############################################################################################################
– partition_index: SYS0
  partition_name: PRELOADER
  file_name: preloader_joya72_wet_jb3.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0x1400000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x00

– partition_index: SYS1
  partition_name: MBR
  file_name: MBR
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1400000
  physical_start_addr: 0x1400000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS2
  partition_name: EBR1
  file_name: EBR1
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1480000
  physical_start_addr: 0x1480000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS3
  partition_name: PRO_INFO
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1500000
  physical_start_addr: 0x1500000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS4
  partition_name: NVRAM
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1800000
  physical_start_addr: 0x1800000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x00

– partition_index: SYS5
  partition_name: PROTECT_F
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1D00000
  physical_start_addr: 0x1D00000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS6
  partition_name: PROTECT_S
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x2700000
  physical_start_addr: 0x2700000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS7
  partition_name: SECCFG
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3100000
  physical_start_addr: 0x3100000
  partition_size: 0x20000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS8
  partition_name: UBOOT
  file_name: lk.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3120000
  physical_start_addr: 0x3120000
  partition_size: 0x60000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS9
  partition_name: BOOTIMG
  file_name: boot.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3180000
  physical_start_addr: 0x3180000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS10
  partition_name: RECOVERY
  file_name: recovery.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3780000
  physical_start_addr: 0x3780000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS11
  partition_name: SEC_RO
  file_name: secro.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3D80000
  physical_start_addr: 0x3D80000
  partition_size: 0x40000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS12
  partition_name: MISC
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3DC0000
  physical_start_addr: 0x3DC0000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS13
  partition_name: LOGO
  file_name: logo.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3E40000
  physical_start_addr: 0x3E40000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS14
  partition_name: EXPDB
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x4140000
  physical_start_addr: 0x4140000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS15
  partition_name: ANDROID
  file_name: system.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x4B40000
  physical_start_addr: 0x4B40000
  partition_size: 0x28A00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS16
  partition_name: CACHE
  file_name: cache.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x2D540000
  physical_start_addr: 0x2D540000
  partition_size: 0x17800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS17
  partition_name: USRDATA
  file_name: userdata.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x44D40000
  physical_start_addr: 0x44D40000
  partition_size: 0x52C00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS18
  partition_name: FAT
  file_name: fat.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x97940000
  physical_start_addr: 0x97940000
  partition_size: 0x537C0000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS19
  partition_name: BMTPOOL
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF00A8
  physical_start_addr: 0xFFFF00A8
  partition_size: 0x1500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00





FLASH AXIOO PICOPHONE 4 GDF

Brand     : Axioo
ProdName  : PICOphone_4
ProdModel : PICOphone_4
Device    : PICOphone
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

FLASH AXIOO PICOPHONE 4 GDF

Bahan :

  1.  Download firmwarenya Axioo PICOphone 4 GDF 4.2.2 ALPS.JB3.MP.V1.zip
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  SCATTER ONLY
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

FLASH VIA FLASHTOOL

LOG READ FLASH AXIOO PICOPHONE 4 GDF VIA CM2

Start  at : [2/12/2016 / 11:16:47 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728056E56D3B0E1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D30344728056E56D3B0E1
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : Axioo
ProdName  : PICOphone_4
ProdModel : PICOphone_4
Device    : PICOphone
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_k298.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / k298 / EMMC
FW Size : 688 MiB
Scatter saved to : G:\andro3\axioo\MT6572__Axioo__PICOphone_4__PICOphone__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:03:47
Reconnect Power/Cable!

Finish at : [2/12/2016 / 11:20:34 PM]

FIRMWARE FLASH SPC S12

FLASH SPC S12 STOCK ROM via FLASHTOOL

  1.  Download firmwarenya STOCK ROM MT6572__alps__SPC_S12__4.4.2__ALPS.KK1.MP7.V1.zip
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

FLASH VIA FLASH TOOL

LOG READ CM2

ABOUT PHONE

 LOG Read Flash SPC S12
Start  at : [2/12/2016 / 2:28:55 AM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7901004D4D4330344745065260907143
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0079 , OEM : 0100
[eMMC] : FLASH_INF : [NOT_IN_BASE] , G40CM
[eMMC] : FLASH_CID : 7901004D4D4330344745065260907143
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : alps
ProdName  : SPC
ProdModel : SPC
Device    : SPC
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_fars72_w_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / fars72_w_kk / EMMC
FW Size : 812 MiB
Scatter saved to : G:\andro3\spc\MT6572__alps__SPC__SPC__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!
Elapsed: 00:04:15
Reconnect Power/Cable!

Finish at : [2/12/2016 / 2:33:11 AM]

SCATTER SPC S12 MT6572_Android_scatter.txt

######################################-=INFINITY-BOX=-######################################################
#
#  General Setting
#
####################################-=CHINESE MIRACLE=-#####################################################
– general: MTK_PLATFORM_CFG
  info:
    – config_version: V1.1.1
      platform: MT6572
      project: fars72_w_kk
      storage: EMMC
      boot_channel: MSDC_0
      block_size: 0x20000
############################################################################################################
#
#  Layout Setting
#
############################################################################################################
– partition_index: SYS0
  partition_name: PRELOADER
  file_name: preloader_fars72_w_kk.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0x1400000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x00

– partition_index: SYS1
  partition_name: MBR
  file_name: MBR
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1400000
  physical_start_addr: 0x1400000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS2
  partition_name: EBR1
  file_name: EBR1
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x1480000
  physical_start_addr: 0x1480000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS3
  partition_name: PRO_INFO
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1500000
  physical_start_addr: 0x1500000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS4
  partition_name: NVRAM
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1800000
  physical_start_addr: 0x1800000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x00

– partition_index: SYS5
  partition_name: PROTECT_F
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1D00000
  physical_start_addr: 0x1D00000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS6
  partition_name: PROTECT_S
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x2700000
  physical_start_addr: 0x2700000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS7
  partition_name: SECCFG
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3100000
  physical_start_addr: 0x3100000
  partition_size: 0x20000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS8
  partition_name: UBOOT
  file_name: lk.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3120000
  physical_start_addr: 0x3120000
  partition_size: 0x60000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS9
  partition_name: BOOTIMG
  file_name: boot.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3180000
  physical_start_addr: 0x3180000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS10
  partition_name: RECOVERY
  file_name: recovery.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3780000
  physical_start_addr: 0x3780000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS11
  partition_name: SEC_RO
  file_name: secro.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3D80000
  physical_start_addr: 0x3D80000
  partition_size: 0x40000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS12
  partition_name: MISC
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3DC0000
  physical_start_addr: 0x3DC0000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS13
  partition_name: LOGO
  file_name: logo.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3E40000
  physical_start_addr: 0x3E40000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS14
  partition_name: EXPDB
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x4140000
  physical_start_addr: 0x4140000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS15
  partition_name: ANDROID
  file_name: system.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x4B40000
  physical_start_addr: 0x4B40000
  partition_size: 0x32000000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS16
  partition_name: CACHE
  file_name: cache.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x36B40000
  physical_start_addr: 0x36B40000
  partition_size: 0xE200000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS17
  partition_name: USRDATA
  file_name: userdata.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x44D40000
  physical_start_addr: 0x44D40000
  partition_size: 0x52C00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS18
  partition_name: FAT
  file_name: fat.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x97940000
  physical_start_addr: 0x97940000
  partition_size: 0x4DFC0000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS19
  partition_name: BMTPOOL
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF00A8
  physical_start_addr: 0xFFFF00A8
  partition_size: 0x1500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00

FLASH AXIOO PICOpad 7H MT6582

AXIOO PICOpad 7H MT6582

FLASH AXIOO PICOpad 7H BOOTLOOP / DEAD BOOT


  Bahan :

  1. FIRMWARE MTK 6582 DOWNLOAD FIRMWARE AXIOO PICOpad 7H 4.4.2 atau Download Disini
  2. FLASH TOOL DOWNLOAD DISINI
  3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

AXIOO 7H YG LAIN

  1. BUAT AXIOO PICOpad 7H MT6572 KELINK INI
  2. Flash Axioo Picopad S1 atau 7H GGB MT6582

ABOUT 

MESINNYA

LOG READ VIA CM2
 FLASH VIA FLASHTOOL
Chinese Miracle II  [MTK module] v 1.40


Start  at : [2/13/2016 / 5:06:06 AM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010038574D423352018B84BAE66153
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
[eMMC] : FLASH_CID : 15010038574D423352018B84BAE66153
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : Axioo
ProdName  : PICOpad 7H
ProdModel : PICOpad 7H(7 3G)
Device    : picopad_7h
AndroidVer: 4.4.2 KitKat
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_picopad_7h.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / picopad_7h / EMMC
FW Size : 934 MiB
Scatter saved to : G:\andro3\axioo\MT6582__Axioo__PICOpad_7H(7_3G)__picopad_7h__4.4.2_KitKat__ALPS.KK1.MP1.V2.11\

All done!

Done!
Elapsed: 00:04:35
Reconnect Power/Cable!

ANDROMAX Z EG680 FIX KAMERA & SENTER

NO PASS / FREE

ANDROMAX Z EG680 FIX KAMERA & SENTER

Kebanyakan setelah diflash karena rom gak cocok, kamera menjadi hilang dimenu, dan senter gak bisa dipake. Flash aja pake CWM njar juga nongol lagi kamera ma senter di Andromax Z kamu.

  1.  Download firmwarenya DISINI atau Disini
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  DOWNLOAD CWM dan FLASH VIA FLASHTOOL 
  6.  Copy file ke mmc FLASH VIA CWM

CEK KAMERA

CEK SENTER

Chinese Miracle II  [MTK module] v 1.40

Start  at : [2/10/2016 / 2:40:37 AM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 484A019064324738A5010304DBB0E1C6
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040301A5C6E1B0DB
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : Smartfren
ProdName  : eg980ae
ProdModel : EG680
Device    : eg980ae
AndroidVer: 4.2.1
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.JB2.EVDO.MP.V1.7

[Read Ok] : preloader_eg980ae.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / eg980ae / EMMC
FW Size : 734 MiB
Scatter saved to : F:\android2\andromax\EG680\MT6589__Smartfren__EG680__eg980ae__4.2.1__ALPS.JB2.EVDO.MP.V1.7\

All done!

Done!
Elapsed: 00:03:39
Reconnect Power/Cable!

Finish at : [2/10/2016 / 2:44:17 AM]