Flash Beyond B97 Flash Tool

Brand     : Beyond
ProdName  :  B97
ProdModel : B97
Device    :  Beyond B97
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

Firmware Beyond B97 Stock rom hanya edit pada build prop ke ZTE Nubia S2.

Bahan :

  1.  Download firmware Beyond B97   DOWNLOAD DISINI
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Beyond B97 via Flash Tool

About Beyond B97

Log Read Firmware Beyond B97
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E50305858585810D3B16C8DA081
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , XXXX0
[eMMC] : FLASH_CID : FE014E50305858585810D3B16C8DA081
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : C822ADDE9B7CA605CD4CC56E0FCA43BD
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ZTE
ProdName  :  ZTE_Nubia-S2
ProdModel : ZTE_Nubia-S2
Device    :  ZTE_Nubia-S2
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

[Read Ok] : preloader_hexing72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hexing72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 686 MiB
Scatter saved to : G:\andro3\beyond\beyond b97\ok\MT6572__ZTE__ZTE_Nubia-S2___ZTE_Nubia-S2__4.2.2__ALPS.JB3.MP.V1.6\

All done!

Firmware UUK NOTE 5 Lolipop

U-U-K Model NOTE 5

Brand     : Note5
ProdName  : Note5
ProdModel : Note5
Device    : Note5
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V2.8_MAGC6572.WET.L
UUK Model : NOTE 5

Bahan :

  1.  Download firmware UUK NOTE 5 Flash Tool
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI), Mahar pulsa 10k

Flash UUK NOTE 5 via Flash Tool

 About UUK Note 5

MediaTek Device Info list
Created by Infinity-Box (c) Chinese Miracle II (c) 2016

Modem Version : magc6572_wet_l_hspa_b1b5
Localization  : K_PRODUCT_LOCALES=en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_ZG pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES in_ID
DisplayRes    : 854 x 480

Supported DGT :
ft6xx6_ges

Supported CAM :
gc2035_yuv
gc2145mipi_yuv
ov5645_mipi_yuv
 gc0313_mipi_yuv gc0310mipi_yuv

Supported BootLoader HW :
FlashID [0] CID : 45010053454D303447 , Name : SEM04G , Vendor : 45 , [SANDISK]
FlashID [1] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [2] CID : 1501004E35585A4D42 , Name : N5XZMB , Vendor : 15 , [SAMSUNG]
FlashID [3] CID : 45010053454D303447 , Name : SEM04G , Vendor : 45 , [SANDISK]
FlashID [4] CID : 90014A483447316404 , Name : H4G1d , Vendor : 90 , [HYNIX]
FlashID [5] CID : 90014A483447326111 , Name : H4G2a , Vendor : 90 , [HYNIX]

Log Read Firmware UUK Note 5
Start  at : [4/26/2016 / 7:13:10 PM]
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473A0DE750DA9251
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473A0DE750DA9251
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : BB5F68F5B153284E9CEF5193240F3ECE
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Note5
ProdName  : Note5
ProdModel : Note5
Device    : Note5
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V2.8_MAGC6572.WET.L

[Read Ok] : preloader_magc6572_wet_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / magc6572_wet_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1381 MiB
Scatter saved to : G:\andro3\uuk note 5\MT6572__Note5__Note5__Note5__5.1__ALPS.L1.MP6.V2.8_MAGC6572.WET.L\

All done!

Flash Advan T3E BUILD NO: v10-v1.2-jb4.2.2

Brand     : ADVAN
ProdName  : reallytek82_tb_jb5
ProdModel : T3E
Device    : reallytek82_tb_jb5
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : GP832_ADVAN_T3E_D1_V0.5_20131220_Z2
Advan T3E BUILD NO: v10-v1.2-jb4.2.2

Bahan :

  1.  Download firmware Advan T3E BUILD NO: v10-v1.2-jb4.2.2
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Advan T3E via Flash Tool

About advan T3E

Log Read Firmware Advan T3E
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D4330344758057B86AB11D1
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344758057B86AB11D1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 8336E09577408103AD9E7DA0448757F6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : reallytek82_tb_jb5
ProdModel : T3E
Device    : reallytek82_tb_jb5
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : GP832_ADVAN_T3E_D1_V0.5_20131220_Z2

[Read Ok] : preloader_reallytek82_tb_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / reallytek82_tb_jb5 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 674 MiB
Scatter saved to : G:\andro3\ADVAN\Advan T3E V10-V1.2-JB4.2.2\MT6582__ADVAN__T3E__reallytek82_tb_jb5__4.2.2__GP832_ADVAN_T3E_D1_V0.5_20131220_Z2\

All done!

Done!
Elapsed: 00:03:57
Reconnect Power/Cable!

Flash Advan S4C Build no: TCK4516A/97055LT_V1.2/OS4.4.2

Brand     : ADVAN
ProdName  : ADVAN
ProdModel : ADVAN S4C
Device    : ADVAN
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : TCK4516_S4C_KK_V1.8_20140726
Advan S4C Build no: TCK4516A/97055LT_V1.2/OS4.4.2

Advan S4C OS4.4.2 bila sudah flash pada JB silahkan lakukan firmware upgrade, indikasi klo pake jb kamera jadi error,
-pake v09 kamera belakang tidak tampil,
-pake v10 tidak dapat terhubung kekamera

Bahan :

  1.  Download firmware Advan S4C Build no: TCK4516A/97055LT_V1.2/OS4.4.2
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Flash Advan S4C via Flash tool
 

about Advan S4C KK

Log Read Firmware S4C
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D43303447580EC32C7F1147
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447580EC32C7F1147
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 081651023244EF16795B5A1FD336777D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : ADVAN
ProdModel : ADVAN S4C
Device    : ADVAN
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : TCK4516_S4C_KK_V1.8_20140726

[Read Ok] : preloader_wt97055.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt97055 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : G:\andro3\ADVAN\ADVAN S4C KITKAT\MT6572__ADVAN__ADVAN_S4C__ADVAN__4.4.2__TCK4516_S4C_KK_V1.8_20140726\

All done!

Done!
Elapsed: 00:04:26

Firmware Advan S4E Build Number : WG4009 W10 V3.0 JB4.2.2

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : ADVAN S4E
Device    : Vandroid
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1
Advan S4E Build Number : WG4009/W10_V3.0/JB4.2.2

Bahan :

  1.  Download firmware stock rom Advan S4E Build Number : WG4009/W10_V3.0/JB4.2.2
  2.  Build lain download dibawah
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Advan S4E Build lain :

Flash Advan S4E Via SP Flash Tool

Log Read Firmware Advan S4E
Operation : Read Flash [ v1.45 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E3958524D420096D6C26051C7
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D420096D6C26051C7
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x0000000070000000
[eMMC] : FLASH_UCP : 1792 MiB [eMMC 2 GiB]
DEV RID    : AA7F1D5EDD4A729B14A166468F7A1EDF
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : ADVAN S4E
Device    : Vandroid
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_vanzo72_wet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / vanzo72_wet_lca / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 665 MiB
Scatter saved to : G:\andro3\ADVAN\s4e wg4009 w10 v3.0 jb4.2.2\MT6572__ADVAN__ADVAN_S4E__Vandroid__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:04:04
Reconnect Power/Cable!

FLash Aldo F68

Aldo F68 CPU RDA 8810

Bahan :
1. Firmware Aldo F68 DOWNLOAD HERE 
2. Kalau belum punya fastboot driver dll, Download Here

Pass : http://kangsuper.blogspot.co.id

 Cara Kerja :
1. extact isi zip fasboot bukan folder tapi isinya ke DRIVE C:\ (intinya biar enak aja)
2. masuk fastboot volume up + down on terus colok kabel, seperti gambar dibawah

3. pilih enter fastboot
4. colok ke pc install driver, arahkan ke folder driver tadi yg dicopy ke c:\driver cari dlm folder
5. masuk ms dos promt/command promt
6. copykan system.img dan userdata.img ke C:\
6. ketik fastboot flash system system.img => enter

 7. done

Bila juga mau flash user data juga ketikkan
fastboot flash userdata userdata.img =>enter

About Aldo F68