Flash & Reset FRP Coolpad A110 via Flash Tool

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Brand     : Coolpad
ProdName  : A110
ProdModel : A110
Device    : A110
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YL6580.WEG.L

Bahan :

  1.  Download FRP ONLY COOLPAD A110
  2.  Download FRP & Full Firmware COOLPAD A110 
  3.  Download MT6580__Coolpad__A110__5.1__ALPS.L1.MP6.V2_YL6580.WEG.L
  4.  Download Flash Tool DOWNLOAD DISINI
  5.  Driver bila belum punya instal dulu driver mtknya
  6.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  7.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Cara Kerja :
1. Buat remove verifikasi akun google Coolpad A110 tinggal pake file FRP only (file ke 1), hanya centang pada tab FRP saja seperti video dibawah
2.  Kalau mau full flash Coolpad A110 pake file yang ke 2

Flash Coolpad A110 via Flash Tool

Log Read Firmware Coolpad A110
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507CEA1C5FC72A3
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507CEA1C5FC72A3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x2AC4A22653C3A3FB6794FB13DDCCC2C8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Coolpad
ProdName  : A110
ProdModel : A110
Device    : A110
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_YL6580.WEG.L

[Read Ok] : preloader_cp3506g.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : lk_bak.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / cp3506g / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1956 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6580__Coolpad__A110__A110__5.1__ALPS.L1.MP6.V2_YL6580.WEG.L\
kangsuper.co.id
All done!

Flash Advan S5J+ Build Number :

Brand     : ADVAN
ProdName  : hct82_cwet_kk
ProdModel : S5J+
Device    : hct82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582

Bahan : 

Download ADVAN-S5J+ Build Number : WG5009/HCT_J11MN_A2/Kitkat4.4 atau DISINI

Download ADVAN-S5J+ Build Number : WG5009/HCT_J11MB_A2/Kitkat4.4 atau DISINI

  1.  Download Flash Tool DOWNLOAD DISINI
  2.  Driver bila belum punya instal dulu driver mtknya
  3.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Rom S5J+ menurut versi R :

  1.  S5J+_R07 Download Disini
  2.  S5J+_R09 Download Disini
  3.  S5J+_R12 Download Disini
  4.  S5J+_R14 Download Disini

Note buat yang mengalami eror playstore di semua versi S5J+ :
1. Masuk setting => aplikasi => copot pemasangan perbaruan Google playstore dan google service

2. Masuk ke aplikasi playstore => setelan dan matikan perbaruan secara otomatis

3. Restart, done

Flash Advan S5J+ VIA Flash Tool

Log Read Firmware Advan S5J+
Operation : Read Flash [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473264040501A24BA2B17B
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d2G8
[eMMC] : FLASH_CID : 90014A4838473264040501A24BA2B17B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 8D041896AE74397AFE3185A5477F65F8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : hct82_cwet_kk
ProdModel : S5J+
Device    : hct82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : WG5009_S5J+_R08_20141203

[Read Ok] : preloader_hct82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hct82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 948 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__ADVAN__S5J+__hct82_cwet_kk__4.4.2__WG5009_S5J+_R08_20141203\
kangsuper.co.id
Done

Flash Aldo AS 8 SC7731

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : AS8
Device Model   : scx35_sp7731gea_ts18_kechao_8p8
Device CPU     : sp7731gea
Device IntName : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Device Version : 4.4.2
Device Compile : 9/12/2015 10:44:51 AM
Device Project : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Device ExtInfo : AS8

Mohon diperhatikan : Firmware ini disesuaikan versinya, versi lain dibawah

Bahan :
1. Firmware PAC ALDO_AS8_V07 DOWNLOAD DISINI
2. Firmware PAC ALDO_AS8_V07 New Pack DOWNLOAD DISINI
3. Firmware Infinity CM2 ALDO_AS8_V07 DOWNLOAD DISINI
4. Download Research Download R2.10
5. Driver SPD by InfinityBox
6. Turorial Flash via research here
7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

UNTUK ALDO AS8 VERSI YANG LAIN DOWNLOAD DIBAWAH

  1.  ALDO AS8 V03
  2.  ALDO AS8 V06
  3.  ALDO AS8 V14
  4.  ALDO AS8 V13
  5.  ALDO AS8 V12

NOTE :
-Versi harus sama
-Bila tdk yakin untuk versi yg mana, pada setting research download, anda bisa coba flash tanpa mencentang UBOOT_LOADER dan EraseUBOOT, atau centang saja system,  cache, dan userdata
-Untuk kasus phone lock silahkan centang userdata saja (fdl1&2 wajib centang)

Log Read Firmware Aldo AS8 V.07
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Model Brand : AS8
Model Device: scx35_sp7731gea_ts18_kechao_8p8
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Model Ext   : AS8

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.46_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 979 MiB
Saved to : G:\andro3\aldo\AS8\SP7731GEA_scx35_sp7731gea_ts18_kechao_8p8_4.4.2_7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14_AS8\
Done!

SAMA DENGAN LINK DISINI

Flash & Hapus FRP Lock Advan i45 Build Number : TCK4531A/S302/Lollipop 5.1

Advan I45 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : i45
Device    : Vandroid
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2_RLK6735M.65U.L1_P1
Tested Buat V1.9 dan 2.0

Bahan :

  1.  Download Firmware Advan I45 Build Number : TCK4531A/S302/Lollipop 5.1 v1.9 atau Download Disini
  2. Download Fimware FRP Only atau Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove verifikasi akun google Advan I45 tinggal pake file FRP only (file ke 2), hanya centang pada tab FRP saja
2.  Kalau mau full flash pake file yang ke 1

 Flash Advan I45 via Flash Tool

    Log Read Firmware Advan i45
    Operation : Read Flash [ v1.50 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6735
    BB_CPU_NME : [MediaTek] MT6735_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x93
    NAND Flash : NOT INSTALLED
    eMMC Flash : 4400014530303153EA9401389FAAA82E
    Initialize Memory …
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x45 , OEM : 0100
    [eMMC] : FLASH_INF : [SANDISK] , 8001S
    [eMMC] : FLASH_CID : 4501004453313030380194EA2EA8A29F
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : 0xFEC7E5116484A02F31496FE1BCA3A7B8
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000 [1 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    xGPT : Normalize settings Ok!

    Brand     : ADVAN
    ProdName  : Vandroid
    ProdModel : i45
    Device    : Vandroid
    AndroidVer: 5.1
    MTKxCPU   : MT6735
    MTKxPRJ   : ALPS.L1.MP3.V2_RLK6735M.65U.L1_P1

    [Read Ok] : preloader_rlk6735m_65u_l1.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : logo.bin
    [Read Ok] : secro.img
    [Read Ok] : tz1.img
    [Read Ok] : tz2.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6735M / V1.1.2 / rlk6735m_65u_l1 / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1773 MiB
    Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6735__ADVAN__i45__Vandroid__5.1__ALPS.L1.MP3.V2_RLK6735M.65U.L1_P1\
    kangsuper.blogspot.co.id
    All done!

    Firmware Acer Z500 BI Bahasa Indonesia Dual SIM

    Brand     : acer
    ProdName  : z500_aap_gen1
    ProdModel : Z500
    Device    : acer_Z500
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.16
    Flash Acer Z500 BI Bahasa Indonesia Dual SIM

    Bahan :

    1.  Download firmware stock rom Acer Z500 BI Bahasa Indonesia Dual SIM atau Download Disini
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Log Read Firmware Acer Z500
    Operation : Read Flash [ v1.50 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A4841473265040503A1BBBA61F3
    Initialize Memory …
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , e2GA
    [eMMC] : FLASH_CID : 90014A4841473265040503A1BBBA61F3
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003AB800000
    [eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
    DEV RID    : 0xBBFBB15227D09C6A4B559AB2E428D3B1
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000 [1 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : acer
    ProdName  : z500_aap_gen1
    ProdModel : Z500
    Device    : acer_Z500
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.16

    [Read Ok] : preloader_aap_gen1.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / aap_gen1 / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1218 MiB
    Scatter saved to : F:\andro3\ACER\z500 bi dual sim\MT6582__acer__Z500__acer_Z500__4.4.2__ALPS.KK1.MP1.V2.16\kangsuper.blogspot.co.id 
    All done!

    Done!
    Elapsed: 00:05:56

    Firmware Flash Tool IMO MTK

    FIRMWARE IMO MTK

    Firmware Imo yang kami upload disini, flash menggunakan SP flash tool.

    1. Imo Discovery II

    2. Imo Q8

    3. Imo S70

    4. Imo S78

    5. Imo S87

    6. Imo S88

    7. Imo S89
    Silahkan ke link Disini

    8. Imo S98

     9. Imo S99

    Bahan :

    1.  Download firmware stock rom IMO diatas
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5.  1 pass buat semua Imo yg kami upload DISINI, Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Flash AsiaFone AF9899 ( CGN )

    Brand     : ASIAFONE
    ProdName  : AF9899
    ProdModel : AF9899
    Device    : AF9899
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.16

    Bahan :

    1.  Download Firmware Asiafone AF9899 (CGN) DOWNLOAD DISINI
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Flash Asiafone AF9899 CGN Via Flashtool

    Log Read Firmware AsiaFone AF9899 ( CGN )

    Operation : Read Flash [ v1.50 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 45010053454D3034472825565E185125
    Initialize Memory …
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x45 , OEM : 0100
    [eMMC] : FLASH_INF : [SANDISK] , G40ME
    [eMMC] : FLASH_CID : 45010053454D3034472825565E185125
    [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
    [eMMC] : FLASH_LEN : 0x00000000EC000000
    [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
    DEV RID    : 0x7B08506B1E316FAA8EB27C35A1964EC6
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000 [512 MiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : ASIAFONE
    ProdName  : AF9899
    ProdModel : AF9899
    Device    : AF9899
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.16

    [Read Ok] : preloader_i31_xfy.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / i31_xfy / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 680 MiB
    Scatter saved to : F:\andro3\ASIAFONE\asiafone af9899\MT6582__ASIAFONE__AF9899__AF9899__4.4.2__ALPS.KK1.MP1.V2.16\kangsuper.blogspot.co.id
     All done!

    Done!
    Elapsed: 00:05:34

    Cara Buka FRP Acer Z320 & Z330 VERIFIKASI AKUN GOOGLE

    Ketika mengembalikan perangkat ke pengaturan pabrik dengan Factory Reset Protection ( FRP ) fitur diaktifkan , Anda harus memasukkan nama pengguna dan password untuk Akun Google yang terdaftar terakhir untuk mendapatkan kembali akses ke perangkat . Anda tidak akan Mampu mengakses perangkat tanpa mandat yang benar . verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda ( misalnya, jika perangkat hilang atau dicuri ) .
    Verifikasi akun google Acer  Z320 & Z330. Untuk bisa menggunakan Acer  Z320 & Z330 yang telah terkunci FRP atau Factory Reset Protection, kita harus melakukan unlock FRP, salah satu cara adalah melakukan restore dari backupan hape normal yg tidak terkunci FRP.
    Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

    Tool bisa digunakan untuk FRP Acer  Z320 & Z330
    Bahan :

    – CLICKFRPZ320.bat DOWNLOAD DISINI atau  DOWNLOAD DISINI

    Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara :
    1. Masuk recovery pencet Volume up + on

    2. Pilih Fastboot Mode, pencet on

    3. Hape akan masuk ke fastboot mode ditandai dengan stuck logo spt dibawah

    4. Colok kabel usb, install driver fastboot, driver ada didalam folder 1clickbat
    5. Klik CLICKFRPZ320.bat, proses hanya 1detik hape langsung restart
    6. done

    Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Flash ZTE V830W BI / Bahasa Indonesia Flash Tool

    Platform: MT6572, cpu abi: armeabi-v7a
    Manufacturer: ZTE
    Board: ztenj72_we_72_kk, name: P172F10
    Brand: ZTE, model: ZTE V830W
    Build id: KOT49H, version: 4.4.2 (DIS-ID-QB18D-P172F10V1.0.0)
    Build version: DIS-ID-QB18D-P172F10V1.0.0

    ZTE V830W Firmware Indonesia
    ZTE V830W BI / Bahasa Indonesia

    Bahan :

    1.  Download ZTE V830W BI / Bahasa Indonesia Download Disini atau  Download Disini
    2.  Download ZTE V830W BI / Bahasa Indonesia Scatter Full Download Disini atau Download Disini
    3.  Download Flash Tool DOWNLOAD DISINI
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Log Read Firmware  ZTE V830W BI / Bahasa Indonesia

    [zegobit] winusb, version: 1.0.3.2, date: 12-18-2015
    Please “Identify Device” at first, before any other operation.
    BROM version: 7.1621.1.0
    Loading DA: MTK_AllInOne_DA.bin (5.71 MiB)
     version: 3.3001.00.00, start addr: 0x40000800
    Connecting to BootROM…
     Scanning BootROM or Preloader port… Done.
     Detected PreLoader USB VCOM Port (COM8)
    Sending download agent…
    USB speed: USB_HIGH_SPEED
    Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
     Secure ver: 0xFF, BL ver: 0x01
     SRAM size: 128 KiB
    DRAM size: 512 MiB
    Card/BGA: BGA (Discrete embedded)
    Manufacturer ID: 0x90 (SK Hynix)
    Product name: H4G1d (0x48344731640400), rev: 0x05, serial number: 0x03A2E719
    Manufacturing date: Sep 1998
    CID: 90014A48 34473164 040503A2 E719913B
    Capacity: 3.65 GiB(3,921,674,240 bytes)
     Boot1: 4096 KiB
     Boot2: 4096 KiB
     RPMB: 4096 KiB
     User area: 3.64 GiB(3,909,091,328 bytes)
    platform: MT6572, cpu abi: armeabi-v7a
    manufacturer: ZTE
    board: ztenj72_we_72_kk, name: P172F10
    brand: ZTE, model: ZTE V830W
    build id: KOT49H, version: 4.4.2 (DIS-ID-QB18D-P172F10V1.0.0)
    build description: ztenj72_we_72_kk-user 4.4.2 KOT49H eng.dongxiaoyong.20140924.181029 release-keys
    build version: DIS-ID-QB18D-P172F10V1.0.0
    lcd: ili9806e_fwvga_dsi_vdo_m453_txd nt35512_fwvga_dsi_vdo_m453
    screen resolution: 854 x 480
    main camera: t8ev5_yuv t8ev5sjc_yuv
     lens: sensordrive
    front camera: gc2145_yuv at2250_yuv
    audio: amp_6323pmic_spk
    touch: msg2138a_fwvga
    modem: ztenj72_we_72_kk_hspa_18
    BROM version: 7.1621.1.0
    Loading DA: MTK_AllInOne_DA.bin (5.71 MiB)
     version: 3.3001.00.00, start addr: 0x40000800
    Connecting to BootROM…
     Scanning BootROM or Preloader port… Done.
     Detected PreLoader USB VCOM Port (COM8)
    Sending download agent…
    USB speed: USB_HIGH_SPEED
    Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
     Secure ver: 0xFF, BL ver: 0x01
     SRAM size: 128 KiB
    DRAM size: 512 MiB
    BL Secure ver: 0x02
    Card/BGA: BGA (Discrete embedded)
    Manufacturer ID: 0x90 (SK Hynix)
    Product name: H4G1d (0x48344731640400), rev: 0x05, serial number: 0x03A2E719
    Manufacturing date: Sep 1998
    CID: 90014A48 34473164 040503A2 E719913B
    Capacity: 3.65 GiB(3,921,674,240 bytes)
     Boot1: 4096 KiB
     Boot2: 4096 KiB
     RPMB: 4096 KiB
     User area: 3.64 GiB(3,909,091,328 bytes)
    platform: MT6572, cpu abi: armeabi-v7a
    manufacturer: ZTE
    board: ztenj72_we_72_kk, name: P172F10
    brand: ZTE, model: ZTE V830W
    build id: KOT49H, version: 4.4.2 (DIS-ID-QB18D-P172F10V1.0.0)
    build description: ztenj72_we_72_kk-user 4.4.2 KOT49H eng.dongxiaoyong.20140924.181029 release-keys
    build version: DIS-ID-QB18D-P172F10V1.0.0
    lcd: ili9806e_fwvga_dsi_vdo_m453_txd nt35512_fwvga_dsi_vdo_m453
    screen resolution: 854 x 480
    main camera: t8ev5_yuv t8ev5sjc_yuv
     lens: sensordrive
    front camera: gc2145_yuv at2250_yuv
    audio: amp_6323pmic_spk
    touch: msg2138a_fwvga
    modem: ztenj72_we_72_kk_hspa_18
    Reading preloader_ztenj72_we_72_kk.bin… Done.
    Reading mbr… Done.
    Reading ebr1… Done.
    Reading pro_info… Done.
    Reading nvram… Done.
    Reading protect_f… Done.
    Reading protect_s… Done.
    Reading seccfg… Done.
    Reading lk.bin… Done.
    Reading boot.img… Done.
    Reading recovery.img… Done.
    Reading secro.img… Done.
    Reading misc… Done.
    Reading logo.bin… Done.
    Reading expdb… Done.
    Reading system.img… Done.
    Reading cache.img… Done.
    Reading userdata.img… Done.
    Reading fat.img… Done.
    Files saved to \\%BACKUPS%\ZTE\ZTE%20V830W\DIS-ID-QB18D-P172F10V1.0.0\
    Completed in 17 mins 13.687 s

    Flash Advan S4+ Build No: P968/HCT-MBC1-A2/MTK6572M

    Brand     : ADVAN
    ProdName  : hct72_cwet_kk
    ProdModel : ADVAN S4+
    Device    : hct72_cwet_kk
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : P968_S4+_MT6572M_MB_V1.0_4.4.2_B2_V0.1_20140613

    Bahan :

    1.  Download Firmware Advan S4+ Build No: P968/HCT-MBC1-A2/MTK6572M atau Download DISINI
    2.  Download Firmware Advan S4+ scatter full backup atau Download Disini
    3.  Download Flash Tool DOWNLOAD DISINI
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Flash Advan S4+ via Flash Tool

    Log read Firmware Advan S4+ Build No: P968/HCT-MBC1-A2/MTK6572M
    Operation : Read Flash [ v1.46 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 7901004D4D4330344745075C5CC03109
    [WARNING] : MEMORY_eMMC_VALIDATE_FAILED
    Initialize Memory …
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x79 , OEM : 0100
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , G40CM
    [eMMC] : FLASH_CID : 7901004D4D4330344745075C5CC03109
    [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
    [eMMC] : FLASH_LEN : 0x00000000E6800000
    [eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
    DEV RID    : E097A3C9CA21DE29A646470818C4F695
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : ADVAN
    ProdName  : hct72_cwet_kk
    ProdModel : ADVAN S4+
    Device    : hct72_cwet_kk
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : P968_S4+_MT6572M_MB_V1.0_4.4.2_B2_V0.1_20140613

    [Read Ok] : preloader_hct72_cwet_kk.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6572 / V1.1.1 / hct72_cwet_kk / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 809 MiB
    Scatter saved to : G:\andro3\ADVAN\S4+ BUILD P968 HTC-MBC1-A2 MT6572M