Month: Oktober 2016

Firmware Advan I7A

godsaveusnow Tak Berkategori

Advan i7A S9720/V7/20160704

Brand : advan
ProdName : i7A
ProdModel : i7A
Device : advan8735m_9710
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.39.1_miki8735m.3gh_P1

PASS : advani7a-ok

Bahan :

 

  1. Download Firmware Advan i7A

  2. Download Flash Tool DOWNLOAD DISINI

  3. Driver bila belum punya instal dulu driver mtknya

  4. Untuk tutorial flash via Flash tool bisa dilihat DISINI

Flash Advan i7A via Flash Tool

Log read Firmware Advan i7A
Start at : [10/25/2016 / 8:21:35 PM]
Operation : Read Flash [ v1.46 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4E0301886472614329723420D3D55687
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420347229875663D3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID : 8DA3C93334F44010B6A23C93E2AEC2F8
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now …
xGPT : Normalize settings Ok!
Brand : advan
ProdName : i7A
ProdModel : i7A
Device : advan8735m_9710
AndroidVer: 6.0
MTKxCPU : MT6735
MTKxPRJ : alps-mp-m0.mp1-V2.39.1_miki8735m.3gh_P1
[Read Ok] : preloader_advan8735m_9710.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img
[ScatCFG] : MT6735M / V1.1.2 / advan8735m_9710 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2206 MiB
Scatter saved to : E:\andro 1\advan i7a\kangsuper\MT6735__advan__i7A__advan8735m_9710__6.0__alps-mp-m0.mp1-V2.39.1_miki8735m.3gh_P1\
All done!

 

Flash Alcatel One Touch 5037X BI Bahasa Indonesia

godsaveusnow Tak Berkategori , , , , , , , , , , , ,

 Alcatel One Touch 5037X

Brand     : TCT
ProdName  : ALCATEL_ONE_TOUCH_5037X
ProdModel : ALCATEL ONE TOUCH 5037X
Device    : YarisL_GSM
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Firmware Alcatel One Touch 5037X
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Alcatel One Touch 5037X via Flash Tool

Log read Firmware Alcatel One Touch 5037X
Start  at : [10/21/2016 / 6:24:46 PM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003030344739301016520F115199
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 1101003030344739301016520F115199
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xA93155672ABCEDFDEBD37B7AA77F28FD
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : TCT
ProdName  : ALCATEL_ONE_TOUCH_5037X
ProdModel : ALCATEL ONE TOUCH 5037X
Device    : YarisL_GSM
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_yarisl.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / yarisl / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1210 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572__TCT__ALCATEL_ONE_TOUCH_5037X__YarisL_GSM__4.2.2__ALPS.JB3.MP.V1\

All done!

Flash Advan i7A

godsaveusnow Tak Berkategori , , , , , , , , , , ,

 Advan i7A S9720/V7/20160704
Brand     : advan
ProdName  : i7A
ProdModel : i7A
Device    : advan8735m_9710
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : alps-mp-m0.mp1-V2.39.1_miki8735m.3gh_P1

PASS : advani7a-ok
NOTE : CEK EMMC MSH TERDETEK GAK, KEBANYAKAN EMMC DAH GAK TERDETEK
Bahan :

  1.   Download Firmware  Advan i7A V6 atau download disini
  2.  Download Firmware  Advan i7A V7 atau download disini
  3.  Download Firmware  Advan i7A V10 atau download disini
  4.  Download Flash Tool DOWNLOAD DISINI
  5.  Driver bila belum punya instal dulu driver mtknya
  6.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 

Flash Advan i7A via Flash Tool

Log read Firmware Advan i7A
Start  at : [10/25/2016 / 8:21:35 PM]
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 4E0301886472614329723420D3D55687
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E4361726420347229875663D3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : 8DA3C93334F44010B6A23C93E2AEC2F8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : advan
ProdName  : i7A
ProdModel : i7A
Device    : advan8735m_9710
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : alps-mp-m0.mp1-V2.39.1_miki8735m.3gh_P1

[Read Ok] : preloader_advan8735m_9710.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / advan8735m_9710 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2206 MiB
Scatter saved to : E:\andro 1\advan i7a\MT6735__advan__i7A__advan8735m_9710__6.0__alps-mp-m0.mp1-V2.39.1_miki8735m.3gh_P1\

All done!

Flash Polytron R2501

godsaveusnow Tak Berkategori , , , , , , , , , , ,

2501

Polytron R2501 atau Polytron Rocket Lite R2501 juga termasuk hape yg sering mengalami bootloop.

Salah satu solusi untuk mengobati hape anda yg bootloop ataupun matot bisa dengan flashing ataupun terserang virus. Langkah-langkah flashingnya sebagai berikut Lolipop:

  1.  Download firmwarenya stock rom Polytron R2501 ok scatternya  DOWNLOAD DISINI
  2.  Firmware Polytron R2501 Update kangsuper terbaru Download Disini
  3.  Download Flash Toolnya DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi) , Mahar pulsa 10k

Flash Polytron R2501


Log Read Firmware Polytron R2501

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 700100563130303038067E5C672A429D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100563130303038067E5C672A429D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now …
Brand     : POLYTRON
ProdName  : POLYTRON__R2501
ProdModel : POLYTRON R2501
Device    : POLYTRON
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_BIRD6582.WT.A.L
[Read Ok] : preloader_bird6582_wt_a_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img
[ScatCFG] : MT6582 / V1.1.1 / bird6582_wt_a_l / EMMC
FW Size : 1062 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__POLYTRON__POLYTRON_R2501__POLYTRON__5.0__ALPS.L0.MP2.V1_BIRD6582.WT.A.L\
All done!

syarat-dan-ketentuan

Firmware Maxtron Amor Flash tool

godsaveusnow Tak Berkategori , , , , , , , , , , ,

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Firmware Maxtron Amor
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Amor via Flash tool

Log Read Firmware Maxtron Amor
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048603A2668090F1
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A2668090F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 115404C62466D68A621B88FE17633564
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 690 MiB
Scatter saved to : G:\andro3\maxtron\amor\MT6572__Maxtron__AMOR__himax_s451_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Firmware Flash Maxtron Apollo Flash Tool

godsaveusnow Tak Berkategori , , , , , , , , , ,

  Maxtron Apollo

Brand     : YUSUN
ProdName  : Maxtron-Apollo
ProdModel : Maxtron-Apollo
Device    : Maxtron-Apollo
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.6

Bahan :

  1. Download Firmware Maxtron Apollo 
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Apollo via Flash Tool

Log Read Firmware Maxtron Apollo
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D42017DE4CC91B033
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D42017DE4CC91B033
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA9315567FAED00849F93171ED3576207
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : YUSUN
ProdName  : Maxtron-Apollo
ProdModel : Maxtron-Apollo
Device    : Maxtron-Apollo
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.6

[Read Ok] : preloader_huaqin82_wet_b2d_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / huaqin82_wet_b2d_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 548 MiB
Scatter saved to : F:\andro3\maxtron\apollo\MT6582__YUSUN__Maxtron-Apollo__Maxtron-Apollo__4.2.2__ALPS.JB5.MP.V1.6\

All done!

Firmware Flash Gpad Excellent 4 Tab

godsaveusnow Tak Berkategori , , , , , , , , , , , ,

 Tab Gpad Excellent 4
Brand     : Gpad
ProdName  : ratech72_wet_rlk_jb3
ProdModel : Gpad Excellent 4 Tab
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : Gpad.Excellent.4.Tab.V04

Bahan :

  1.  Firmware Gpad Excellent 4 Tab V.04
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k 

Flash Gpad Excellent 4 Tab via Flash tool

Log Read Firmware Gpad Excellent 4 Tab
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201721CD83F418B
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201721CD83F418B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : EA6E8066A433E6D547D5FD16B7E70F9F
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Gpad
ProdName  : ratech72_wet_rlk_jb3
ProdModel : Gpad Excellent 4 Tab
Device    : ratech72_wet_rlk_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : Gpad.Excellent.4.Tab.V04

[Read Ok] : preloader_ratech72_wet_rlk_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / ratech72_wet_rlk_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 821 MiB
Scatter saved to : F:\andro3\gpad\excellent 4 tab\New folder\MT6572__Gpad__Gpad_Excellent_4_Tab__ratech72_wet_rlk_jb3__4.2.2__Gpad.Excellent.4.Tab.V04\

All done!

Firmware Flash Asiafone AF19 (DKO)

godsaveusnow Tak Berkategori , , , , , , , , , ,

 Asiafone AF19 (DKO)

Model Name  : ASIADROID AF19
Model Brand : ASIADROID AF19
Model Device: ASIADROID
AndrVersion : 5.1
BaseBand CPU: ASIADROID AF19
Project Ver : ALF_S4018_DR_HS101_AF19_V1.3_151229
Model Ext   : ASIADROID AF19

Bahan :
1. Download Firmware PAC  Flash AF19 ALF_S4018_DR_HS101_AF19_V1.3_151229 atau download disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara  Flash Asiafone AF19 (DKO)

Log Read Flash AsiaFone AF19
Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : ASIADROID AF19
Model Brand : ASIADROID AF19
Model Device: ASIADROID
AndrVersion : 5.1
BaseBand CPU: ASIADROID AF19
Project Ver : ALF_S4018_DR_HS101_AF19_V1.3_151229
Model Ext   : ASIADROID AF19

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1431 MiB
Saved to : F:\andro3\ASIAFONE\af19\DKO\ASIADROID_AF19_ASIADROID_5.1_ALF_S4018_DR_HS101_AF19_V1.3_151229_ASIADROID_AF19\
Done!

Firmware Flash Mito T89 V2 T03

godsaveusnow Tak Berkategori , , , , , , , , , ,

 Mito T89 V2 3G T03

Model Name  : sp7731geaplus_k03_whxmito_64_4_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_4
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_32_4
Project Ver : LMY47D release-keys
Model Ext   : MITO_T89

Bahan :
1. Download Firmware PAC  Flash Mito T89 V2 3G SC7731 T03 atau Download Disini
2. Download Firmware PAC MITO_T89 v2_3G_201604061542_TN7 atau Download Disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara  Flash Mito T89 V2 T03

Log Read Firmware Mito T89 T03
 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geaplus_k03_whxmito_64_4_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_4
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_32_4
Project Ver : LMY47D release-keys
Model Ext   : MITO_T89

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1533 MiB
Saved to : F:\andro3\mito\t89\v2\SP7731GEA_K03_WHXMITO_32_4_scx35_sp7731gea_k03_whxmito_64_4_5.1_LMY47D_release-keys_MITO_T89\
Done!

Firmware Flash Redmi Note 2 Prime 2015051 BI/Bahasa Indonesia & Bypass Micloud

godsaveusnow BYPASS, FIRMWARE, FLASH, FRP, GOOGLE, MI CLOUD, rom, XIAOMI , , , , , , , , , , ,

Redmi Note 2 Prime 2015051
Micload Redmi Note 2  ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

Bahan :

  1.  Download Firmware  Redmi Note 2 Prime 2015051 BI + Bypass Micloud
  2.  Atau bisa pakai rom redmi note 2 2015052  DOWNLOAD
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

BACA JUGA :

Flash  Redmi Note 2 Prime 2015051 via Flash Tool

 

Log Read Firmware Xiaomi  Redmi Note 2 Prime 2015051
Start  at : [10/6/2016 / 9:58:37 PM]
Operation : Read Flash [ v1.57 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6795
BB_CPU_NME : [MediaTek] Helio[X10]|MT6795_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.3.2 on BBID : 0x92
NAND Flash : NOT INSTALLED
eMMC Flash : 11010030313647373200CB9928CF7237
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 27G61
[eMMC] : FLASH_CID : 11010030313647373200CB9928CF7237
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID    : 0xA93155672A0F95E4E5494EA62AE4FBC2
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Xiaomi
ProdName  : hermes
ProdModel : Redmi Note 2
Device    : hermes
AndroidVer: 5.0.2
MTKxCPU   : MT6795
MTKxPRJ   : ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129

[Read Ok] : preloader_lcsh6795_lwt_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6795 / V1.1.2 / lcsh6795_lwt_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1638 MiB
Scatter saved to : F:\andro3\xiaomi\2015051\MT6795__Xiaomi__Redmi_Note_2__hermes__5.0.2__ALPS.L0.MP6.V3.18_LCSH6795.LWT.L_P129\

All done!