Brand     : alps
ProdName  : BP99
ProdModel : BP99
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : MP.V1.0

CEK : FISIK HARUS SEPERTI SEPERTI GAMBAR YANG KAMI UPLOAD
Bahan :

 1. Download Firmware Bellphone BP99

•  A). Download Firmware Bellphone BP99 V1.4 BP200 atau Download Disini

 Bellphone BP99 V1.4 seperti gambar dibawah SIMCARD BESAR SEMUA 

 

•  B). Download Firmware Bellphone BP99 V1.5 BP221 atau Download Disini

 Bellphone BP99 V1.5 seperti gambar dibawah SIM BESAR & KECIL

•  C). Versi lain Bellphone BP99 Download Disini

2.  Download Flash Tool DOWNLOAD DISINI
3.  Driver bila belum punya instal dulu driver mtknya
4.   Untuk tutorial flash via Flash tool bisa dilihat DISINI 
 Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Note :
-Bila telah diflash dan bellphone BP99 muncul eror 4032 (selain emmc), silahkan flash menggunakan versi 1.4 dulu kemudian v1.5, gunakan firmware upgrade saja.
-BP99 V1.5 diflash pake Rom V1.4 TS tidak jalan, layar terpotong bagian bawah

 Flash Bellphone BP99 via Flash Tool

Log Read Firmware Bellphone BP99
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 009800BC009000660076001500010000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0097 , NAND_UNKNOWN
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0015 0001
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID    : 0xA93155677EBA52D5CA41FFA808FA0825
INT RAM    : 0x00020000
EXT RAM    : 0x10000000 [256 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now …
[Read Ok] : preloader_s3017_72_nand_bp200_samsung_bellphone_4
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img
[ScatCFG] : MT6572 / V1.1.1 / s3017_72_nand_bp200_samsung_bellpho / NAND
FW Size : 241 MiB

Brand     : alps
ProdName  : BP99
ProdModel : BP99
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : MP.V1.0
Android Info saved
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572_NAND_alps__BP99___4.4.2__MP.V1.0

Done!