Flash Polytron R2507 White / Dark Gold ZT

 POLYTRON R2507 V5.2.6 20161217

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2507_V5.2.6_20161217
Model Ext   : POLYTRON R2507

Bahan :

    1. Download Firmware PAC Polytron R2507 White Gold ZT V5.2.6 20161217 atau Download Disini
     
    2. Download Firmware PAC Polytron R2507 Dark Gold ZT V5.2.7 20161223 atau Download Disini

    3. Download WAJIP PAKE SPD_Upgrade_Tool_R4.0.0001  Download Disini
    4.  Driver SPD by InfinityBox
    5. Tutorial Flash via research here
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Firmware Pac Polytron R2507 versi lain :

    Error pada research download baca disini

    Cara Flash R2507 via SPD UPGRADE TOOL

    Log read Firmware Polytron R2507 White Gold ZT
    Operation : Read FullFlash [ v1.25 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 11 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2507_V5.2.6_20161217
    Model Ext   : POLYTRON R2507
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : fbootlogo3.bin
    [Read Ok] : fbootlogo4.bin
    [Read Ok] : fbootlogo5.bin
    [Build Ok] : userdata.img
    AndroidInfo created
    Firmware Size : 2229 MiB
    Saved to : E:\polytron\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2507_V5.2.6_20161217_POLYTRON_R2507\
    Done!

    Elapsed: 00:14:57

    Flash & Firmware MIVO MV480

    Brand     : MIVO
    ProdName  : MV480
    ProdModel : MV480
    Device    : d958
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP6.V1

    Bahan :

    1.  Download Firmware Mivo MV480 atau Download Disini
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Flash Mivo MV480 via Flash Tool

    Log Read Firmware Mivo MV480
    Operation : Read Flash [ v1.46 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 110100303034473930102090D417209F
    Initialize Memory …
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x11 , OEM : 0100
    [eMMC] : FLASH_INF : [TOSHIBA] , 09G40
    [eMMC] : FLASH_CID : 110100303034473930102090D417209F
    [eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000000EC000000
    [eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
    DEV RID    : 44A94748FB0C9650F4D015B6CCD552EB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : MIVO
    ProdName  : MV480
    ProdModel : MV480
    Device    : d958
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP6.V1

    [Read Ok] : preloader_d958.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : logo2.bin
    [Read Ok] : logo3.bin
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6572 / V1.1.1 / d958 / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 955 MiB
    Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572__MIVO__MV480__d958__4.4.2__ALPS.KK1.MP6.V1\

    All done!

    Flash & Firmware Fortis Apollo 5 MT6582

    Fortis Apollo 5
    Brand     : MS930
    ProdName  : MS930
    ProdModel : Apollo 5
    Device    : MS930
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.10

    Bahan :

    1.  Download Firmware Fortis Apollo 5 atau Download Disini
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Flash Fortis Apollo 5 via Flash Tool

    Log Read Firmware Fortis Apollo 5
    Operation : Read Flash [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A48384731650507455A24643297
    Initialize Memory …
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , e1G8
    [eMMC] : FLASH_CID : 90014A48384731650507455A24643297
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : 0xFCC4CFBD8016F65058FC6280D7076358
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000 [1 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : MS930
    ProdName  : MS930
    ProdModel : Apollo 5
    Device    : MS930
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.10

    [Read Ok] : preloader_sm619b_w_jdf_ms930_evercoss_82.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / sm619b_w_jdf_ms930_evercoss_82 / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 951 MiB
    Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6582__MS930__Apollo_5__MS930__4.4.2__ALPS.KK1.MP1.V2.10\

    All done!

    Flash & Remove FRP Aldo AS 10

    Aldo AS-10 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
    Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

    Brand     : ALDO
    ProdName  : ALDO
    ProdModel : ALDO
    Device    : ALDO
    AndroidVer: 5.1
    MTKxCPU   : MT6580
    MTKxPRJ   : ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42
    ALDO_P0_6_20160218

     Bahan :

    1.  Download Full firmware + FRP Aldo AS10 atau Download Disini
    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Firmware ALDO  AS 10  4.4 KitKat Download disini

    Cara Kerja :
    Buat remove verifikasi akun google Aldo AS-10 tinggal , hanya centang pada tab FRP saja seperti video dibawah video 1

    Cara Flash & remove FRP verifikasi akun google Aldo AS 10 via flash tool
    -Only Remove FRPAldo AS 10

    -Flash & Remove FRP Aldo AS 10

     Log Read Firmware Aldo As 10
    Operation : Read Flash [ v1.46 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6580
    BB_CPU_NME : [MediaTek] MT6580_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x94
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A483847316505072AFA854EC229
    Initialize Memory …
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , e1G8
    [eMMC] : FLASH_CID : 90014A483847316505072AFA854EC229
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : E095483D82CCF4455958850AB9DA6E4F
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    xGPT : Normalize settings Ok!

    Brand     : ALDO
    ProdName  : ALDO
    ProdModel : ALDO
    Device    : ALDO
    AndroidVer: 5.1
    MTKxCPU   : MT6580
    MTKxPRJ   : ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42

    [Read Ok] : preloader_b905_huaxing.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : logo.bin
    [Read Ok] : secro.img
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6580 / V1.1.2 / b905_huaxing / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 1381 MiB
    Scatter saved to : E:\andro 1\aldo\as10\MT6580__ALDO__ALDO__ALDO__5.1__ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42\

    All done!

    Flash, Firmware & BYPASS FRP Mito A69

    Model Name  : s7358_qhd_lmplus_dt_Multi
    Model Brand : MITO_A69
    Model Device: scx35_s7358_qhd_lm
    AndrVersion : 5.1
    BaseBand CPU: S7358_QHD_LM
    Project Ver : MITO_A69_07-09-2016_V10
    Model Ext   : MITO_A69

    Bahan:

    DOWNLOAD BYPASS FRP ONLY / BYPASS AKUN GOOGLE ~ MITO A69

    1. Download Firmware PAC FULL Mito A69 v10 atau Download disini

    2. Download Firmware PAC FULL Mito A69 v14 atau Download disini

    3. Download Research Download R2.10
    4. Driver SPD by InfinityBox
    5. Turorial Flash via research here
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
    Error pada research download baca disini

    Cara Kerja :

    • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
    • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
    • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
    • Boot volume (- /+)
    • Flash  Mito A69 via research Download, flash aja dgn rom diatas + BYPASS FRP
    • Buat mito A69 V08 : MITO_A69_16112016_V08 silah kan pake A69 versi 014 => klo berhenti dis ystem, flash pake v14 tanpa system, selesai baru flash pake system, DONE

    Model Name  : sp7731g_s7358_qhd_lm_oversea
    Model Brand : HOTWAV
    Model Device: scx35_s7358_qhd_lm
    AndrVersion : 6.0
    BaseBand CPU: S7358_QHD_LM
    CompileDate : 11/19/2016 8:40:13 AM
    Project Ver :
    Model Ext   : MITO_A69

      Cara Flash  Mito A69 via Research Download

      Log Read Firmware Mito A69
      Operation : Read FullFlash [ v1.26 ]

      1. Remove battery. Insert battery back
      2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
      3. Insert cable

       ====  Wait for phone…

      FlashMode Set : Ok!
      Detected eMMC Flash , Structure detect Ok!
      [FW_READER] : Prepare Ok!
      – > Wait phone connected …
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SPRD 773x eMMC loader v3 Infinity
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      – > Wait phone connected …
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SPRD 773x eMMC loader v3 Infinity
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      Model Name  : s7358_qhd_lmplus_dt_Multi
      Model Brand : MITO_A69
      Model Device: scx35_s7358_qhd_lm
      AndrVersion : 5.1
      BaseBand CPU: S7358_QHD_LM
      Project Ver : MITO_A69_07-09-2016_V10
      Model Ext   : MITO_A69
      [Read Mode] : HSUSB : 0x3000
      [FW_READER] : Reading Firmware Now …
      [Read Ok] : u-boot-spl-16k.bin
      [Read Ok] : u-boot.bin
      [Read Ok] : prodnv.img
      [Read Ok] : sc7731g_CP0_modem.bin
      [Read Ok] : DSP_DM_Gx.bin
      [Read Ok] : nvitem_w.bin
      [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
      [Read Ok] : nvitem_wcn.bin
      [Read Ok] : logo_540x960.bin
      Skip [EMP] : FBOOTLOGO
      Skip [EMP] : FBOOTLOGO3
      Skip [EMP] : FBOOTLOGO4
      Skip [EMP] : FBOOTLOGO5
      Skip [EMP] : FBOOTLOGO6
      Skip [EMP] : FBOOTLOGO7
      [Read Ok] : boot.img
      [Read Ok] : system.img
      [Build Ok] : cache.img
      [Read Ok] : recovery.img
      [Build Ok] : userdata.img
      AndroidInfo created
      Firmware Size : 1331 MiB
      Saved to : E:\andro 1\mito\mito a69\New folder\S7358_QHD_LM_scx35_s7358_qhd_lm_5.1_MITO_A69_07-09-2016_V10_MITO_A69\
      Done!

      Flash & Remove FRP Polytron L501 WHITE / BLACK TESTED

      Polytron L 501 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
      Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

      Brand     : POLYTRON_L501
      ProdName  : POLYTRON_L501
      ProdModel : POLYTRON_L501
      Device    : Android
      AndroidVer: 5.1
      MTKxCPU   : MT6735
      MTKxPRJ   : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

      TESTED BUAT :
      -Polytron L501 WHITE
      -Polytron L501 BLACK

       Bahan :

      1.  Download Firmware Polytron L501 FRP only v02 atau Download Disini
      2.  Download Full firmware + FRP Polytron L501 v02 atau Download Disini
      3.  Download Flash Tool DOWNLOAD DISINI
      4.  Driver bila belum punya instal dulu driver mtknya
      5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
      6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      Versi Lain Polytron L501 :

      Cara Kerja :
      1. Buat remove verifikasi akun google Polytron L501 tinggal pake file FRP only (file ke 1), hanya centang pada tab FRP saja seperti video dibawah
      2.  Kalau mau full flash Polytron L501 pake file yang ke 2
      3. FULL FLASH WAJIB CENTANG DA DL ALL with Checksum pada Flash tool, . Setting : Flashtool=>option=>Download=>centang

      Cara Flash & remove FRP verifikasi akun google Polytron L501 via flash tool

       Log Read Firmware Polytron L 501
       Operation : Read Flash [ v1.46 ]

      1. Power Off Phone , Remove battery , Insert back
      2. Insert USB cable. In some cases require hold BootKey

      Wait for phone…
      Phone found! [ 3 ]
      Sync…
      Inital Boot Ok!
      BB_CPU_PID : 6735
      BB_CPU_NME : [MediaTek] MT6735_S00
      BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
      Processing BROM stage
      Settings for BROM configured!
      SecCfgVal : 0x00000000
      BromVer   : 0x00FF
      BLVersion : 0x0001
      PreLoader : Active [ Boot with PL ]
      BootLdrSS : NORMAL with SPRELOADER
      Processing DA stage
      DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
      Sending and initialize DA …
      Running DA ver.4.2 on BBID : 0x93
      NAND Flash : NOT INSTALLED
      eMMC Flash : 484A019065314738E93407055B986106
      Initialize Memory …
      DRAM already initialized by Preloader
      eMMC FlashIC initialized
      [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
      [eMMC] : FLASH_INF : [HYNIX] , e1G8
      [eMMC] : FLASH_CID : 90014A4838473165050734E90661735B
      [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
      [eMMC] : FLASH_LEN : 0x00000001D2000000
      [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
      DEV RID    : DA90FBBBA64FE7083A7661193F696B75
      INT RAM    : 0x00020000
      EXT RAM    : 0x40000000
      BOOT TYPE  : EMMC_FLASH_BOOT
      SOC VERIFY : C1
      Boot Ok!

      Reading Flash Content now …

      xGPT : Normalize settings Ok!

      Brand     : POLYTRON_L501
      ProdName  : POLYTRON_L501
      ProdModel : POLYTRON_L501
      Device    : Android
      AndroidVer: 5.1
      MTKxCPU   : MT6735
      MTKxPRJ   : ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L

      [Read Ok] : preloader_bird6735m_35gu_a_l.bin
      [Read Ok] : lk.bin
      [Read Ok] : boot.img
      [Read Ok] : recovery.img
      [Read Ok] : logo.bin
      [Read Ok] : secro.img
      [Read Ok] : tz1.img
      [Read Ok] : tz2.img
      [Read Ok] : system.img
      [Make Ok] : cache.img
      [Make Ok] : userdata.img

      [ScatCFG] : MT6735M / V1.1.2 / bird6735m_35gu_a_l / EMMC
      Android Info saved
      MAUI Meta DB saved
      HWConfig Info saved
      FW Size : 1661 MiB
      Scatter saved to : E:\andro 1\polytron\L 501\MT6735__POLYTRON_L501__POLYTRON_L501__Android__5.1__ALPS.L1.MP3.V1_BIRD6735M.35GU.A.L\

      All done!

      Flash & Firmware Brandcode B29 MTK & SPD

      BRANCODE B29 MTK MT6572

      Brandcode B29
      Brand     : kimfly
      ProdName  : B29
      ProdModel : B29
      Device    : kimfly
      AndroidVer: 4.4.2
      MTKxCPU   : MT6572
      MTKxPRJ   : ALPS.KK1.MP7.V1

      NOTE :  cek fisik, slot simcard, mmc, dan versi
      Bahan :
      1). BRANCODE B29 MTK

        1.) Download Firmware Brandcode B29 MT6572 V1.3 atau Download Disini

                Brandcode B29 MT6572 V1.3
         
        2.) Download Firmware Brandcode B29 MT6572 V1.6 atau Download Disini

         

            Brandcode B29 MT6572 V1.6

        3.) DOWNLOAD ROM Versi lain Brancode B29 MT6572 NAND Download Disini

        4. Download Flash Tool DOWNLOAD DISINI
        5. Driver bila belum punya instal dulu driver mtknya
        6. Untuk tutorial flash via Flash tool bisa dilihat DISINI 
        7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k



          2). BRANCODE B29 SPD

          1.  Download Firmware PAC BRANCODE B29 SC7715 atau  Download Disini
          2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
          3.  Driver SPD by InfinityBox
          4.  Tutorial Flash via research here
          5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
           BRANCODE B29 SPD SC7715

           Error pada research download baca disini

           Cara Flash Brancode B29 via Flash Tool

          Log Read Firmware Brandcode B29
          Operation : Read Flash [ v1.46 ]

          1. Power Off Phone , Remove battery , Insert back
          2. Insert USB cable. In some cases require hold BootKey

          Wait for phone…
          Phone found! [ 3 ]
          Sync…
          Inital Boot Ok!
          BB_CPU_PID : 6572
          BB_CPU_NME : [MediaTek] MT6572_S00
          BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
          Processing BROM stage
          Settings for BROM configured!
          SecCfgVal : 0x00000000
          BromVer   : 0x00FF
          BLVersion : 0x0001
          PreLoader : Active [ Boot with PL ]
          BootLdrSS : NORMAL with SPRELOADER
          Processing DA stage
          DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
          Sending and initialize DA …
          Running DA ver.4.2 on BBID : 0x88
          NAND Flash : 009800BC009000660076001600080000
          eMMC Flash : NOT INSTALLED
          Initialize Memory …
          DRAM already initialized by Preloader
          NAND FlashIC initialized
          [NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
          [NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
          [NAND] : FLASH_LEN : 0x20000000
          [NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
          DEV RID    : 5FD5016174E9B287C1225491E5932EF0
          INT RAM    : 0x00020000
          EXT RAM    : 0x10000000
          BOOT TYPE  : NAND_FLASH_BOOT
          SOC VERIFY : C1
          Boot Ok!

          Reading Flash Content now …

          [Read Ok] : preloader_yuanda72_cwet_lca.bin
          [Read Ok] : lk.bin
          [Read Ok] : boot.img
          [Read Ok] : recovery.img
          [Read Ok] : secro.img
          [Read Ok] : logo.bin
          [Read Ok] : system.img
          [Read Ok] : cache.img
          [Read Ok] : usrdata.img

          [ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND
          FW Size : 316 MiB

          Brand     : kimfly
          ProdName  : B29
          ProdModel : B29
          Device    : kimfly
          AndroidVer: 4.4.2
          MTKxCPU   : MT6572
          MTKxPRJ   : ALPS.KK1.MP7.V1

          Android Info saved

          Scatter saved to : E:\andro 1\brandcode\b29\MT6572_NAND_kimfly__B29__kimfly__4.4.2__ALPS.KK1.MP7.V1

          Done!