Flash Axioo PICOphone M4P+ (M3)

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP8_20151209
Model Ext   : PICOphone_M4P_M3


Bahan :

  1.  Download Firmware PAC Axioo PICOphone M4P+ (M3) atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume UP+DOWN

Cara Flash Axioo PICOphone M4P+ (M3) via Research Download

Log Read Firmware Axioo PICOphone M4P+ (M3)
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP8_20151209
Model Ext   : PICOphone_M4P_M3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1974 MiB
Saved to : D:\axioo\m4p m3\m4p+ m3\SP7731GEA_HDR_PICOphone_M4P_M3_5.1_PICOphone_M4P\
Done!

Flash & Firmware K-TOUCH H2

K-TOUCH H2 TBT9780_P2_004
Brand     : alps
ProdName  : tianyu92_wet_td
ProdModel : H2
Device    : tianyu92_wet_td
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.11

Bahan :

  1.  Download  Firmware K-TOUCH H2 atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini SP_Flash_Tool_v5.1408.00 Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Cara Flash K-TOUCH H2 via FlashTool

 Log Read Firmware K-TOUCH H2
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 14 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265040508A106A8419D
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265040508A106A8419D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 35C9C4153CEF086277369AF29156329A
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : tianyu92_wet_td
ProdModel : H2
Device    : tianyu92_wet_td
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_tianyu92_wet_td.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / tianyu92_wet_td / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 952 MiB
Scatter saved to : D:\KTOUCH H2\MT6592__alps__H2__tianyu92_wet_td__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Flash & Hapus FRP Alcatel 5010D BI / Bahasa Indonesia

FRP Alcatel 5010D  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

MTKxCPU: MT6580
ProdName: 5010D
ProdModel: 5010D
Device: Pixi4-5
AndroidVer: 6.0
Brand: TCL
MTKxPRJ: alps-mp-m0.mp1-V2.34_jhz6580.we.m_P36
DisplayID: Marshmallow
BoardID:
BuildDate: Mon Aug 22 09:43:18 CST 2016

Bahan :

  1.  Download  Firmware Alcatel 5010D  FRP ONLY  atau Download Disini (87KB)
  2.  Download  Firmware FULL Alcatel 5010D  + FRP  atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Alcatel 5010D, hanya centang pada tab FRP, lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain
3. ABIS FLASH ALCATEL 5010D LOADING LAMA, kalo mau cepat tunggu 2mnt trus copot pasang batray, hidupkan lagi

Cara Flash Alcatel 5010D via flash tool

Log Read Firmware Alcatel 5010D
Start  at : [10/28/2016 / 12:44:32 AM]
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D4200C05E96E24305
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D4200C05E96E24305
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 67B88ACF91B8D7893DBA65EC1EEDD912
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

[Read Ok] : preloader_pixi4_5.bin
[Read Ok] : lk.bin
[Read Ok] : logo.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / pixi4_5 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1834 MiB
Scatter saved to : F:\andro3\ALCATEL MTK\5010D\New folder\MT6580_5010D_Pixi4-5_6.0_TCL_alps-mp-m0.mp1-V2.34_jhz6580.we.m_P36\

All done!

Flash & Firmware Brancode B77

Model Name  : sp7731c_1h10_32v4_oversea
Model Brand : wanda
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : B77_16B_2SIM_20161122
Model Ext   : B77

PENTING !!! Kami hanya Upload 1 file mohon dicek versi dkk, backup dulu kalau perlu
Bahan :

  1.  Download Firmware PAC Brancode  B77 16B_2SIM_20161122 atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume +

Cara Flash Brandcode B77 via Research Download

Log Read Firmware Brandcode B77

Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_32v4_oversea
Model Brand : wanda
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : B77_16B_2SIM_20161122
Model Ext   : B77

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.43.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1681 MiB
Saved to : E:\andro 1\brandcode\b77\SP7731CEB_sp7731c_1h10_32v4_6.0_B77_16B_2SIM_20161122_B77\
Done!