BYPASS FRP & FLASH HM M3

FRP HM M3 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya, thx

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3

 Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

Bahan :

A. BYPASS FRP ONLY ukuran PAC 1 MB

B. ROM PAC FULL HM M3

     TOOL :

    1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    2.  Driver SPD by InfinityBox
    3.  Tutorial Flash via research here
    4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Kerja :

    • Untuk FRP HM M3 tinggal pake PAC BYPASS FRP ONLY
    • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
    • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
    • Boot volume (+)

    Cara Bypass FRP HM M3 via Research Download

    Cara Flash HM M3 via Research Download

    Log Read Firmware HM M3
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731c_1h10_oversea
    Model Brand : HM
    Model Device: sp7731c_1h10
    AndrVersion : 6.0
    BaseBand CPU: SP7731CEA
    Project Ver : MRA58K release-keys
    Model Ext   : M3
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_720x1280.bin
    [Read Ok] : logo2.bin
    [Read Ok] : logo3.bin
    [Read Ok] : logo4.bin
    [Read Ok] : logo5.bin
    [Read Ok] : logo6.bin
    [Read Ok] : logo7.bin
    [Read Ok] : logo8.bin
    [Read Ok] : logo9.bin
    [Read Ok] : logo10.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : sysinfo.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1707 MiB
    Saved to : E:\hm\m3\New folder\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M3\
    Done!

    Flash & Firmware Nexcom Mega

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    Bahan :

    1.  Download Firmware PAC Nexom Mega atau  Download Disini
    2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    3.  Driver SPD by InfinityBox
    4.  Tutorial Flash via research here
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Note :
    1. Boot volume (-)

    Cara Flash Nexcom Mega via Research Download

    Log Read Firmware Nexcom Mega
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc8830_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_800x1280.bin
    [Read Ok] : fblogo_800x1280.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1044 MiB
    Saved to : F:\Nexcom Mega\SP5735C2EA_scx35_sp5735c2ea_4.4.2_NC_Mega_20160920_Mega\
    Done!

    Flash & Bypass FRP Lenovo TB3-701i via Flash tool

    FRP Lenovo TB3-701i  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

    Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
    Brand     : Lenovo
    ProdName  : LenovoTB3-710I
    ProdModel : Lenovo TB3-710I
    Device    : TB3-710I
    AndroidVer: 5.1
    MTKxCPU   : MT6580
    MTKxPRJ   : TB3-710I_USR_S000029_1603181200_MP6V2_ROW

    Bahan :

    1.  Download  Firmware Lenovo TB3-701i FRP ONLY  atau Download Disini (73KB)
    2. Download  Firmware FULL Lenovo TB3-701i  + FRP atau Download Disini
    3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Kerja :
    1. Buat remove FRP verifikasi akun google Lenovo TB3-710I, hanya centang pada tab FRP, silahkan lihat video dibawah
    2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

     Cara Flash Lenovo TB3-710I via Flash Tool

    Log Read Firmware Lenovo TB3-701i
    Operation : Read Flash [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 6 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6580
    BB_CPU_NME : [MediaTek] MT6580_S00
    BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x94
    NAND Flash : NOT INSTALLED
    eMMC Flash : 90014A483847316505072E97DC435357
    Initialize Memory …
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x90 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , e1G8
    [eMMC] : FLASH_CID : 90014A483847316505072E97DC435357
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : 0xFCC4CFBD1B61CD7931318226E76865E8
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000 [1 GiB]
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    xGPT : Normalize settings Ok!

    Brand     : Lenovo
    ProdName  : LenovoTB3-710I
    ProdModel : Lenovo TB3-710I
    Device    : TB3-710I
    AndroidVer: 5.1
    MTKxCPU   : MT6580
    MTKxPRJ   : TB3-710I_USR_S000029_1603181200_MP6V2_ROW

    [Read Ok] : preloader_hq8321_tb_b2b_l.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : logo.bin
    [Read Ok] : secro.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6580 / V1.1.2 / hq8321_tb_b2b_l / EMMC
    Android Info saved
    MAUI Meta DB saved
    HWConfig Info saved
    FW Size : 2008 MiB
    Scatter saved to : D:\ANDROID\lenovo 2\lenovo\TB3-710i\New folder\MT6580__Lenovo__Lenovo_TB3-710I__TB3-710I__5.1__TB3-710I_USR_S000029_1603181200_MP6V2_ROW\

    Flash & Bypass FRP Mito A39 via Flash Tool

    FRP Mito A39  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

    Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

    Brand     : MITO A39
    ProdName  : MITO A39
    ProdModel : MITO A39
    Device    : MITO_A39
    AndroidVer: 6.0
    MTKxCPU   : MT6737M
    MTKxPRJ   : alps-mp-m0.mp1-V2.84_droi6737t.35g.m0_P78

    Bahan :

      1. Mito A39 T10
       Download  Firmware Mito A39  T10 FRP ONLY   atau Download Disini (73KB)
       Download  Firmware FULL Mito A39 T10  + FRP   atau Download Disini

      2. Mito A39 T15
       Download  Firmware Mito A39 T15 FRP ONLY   atau Download Disini (73KB)
       Download  Firmware FULL Mito A39 T15  + FRP   atau Download Disini

      3. Mito A39  V006_RAM3GB
        Download  Firmware Mito A39 RAM3GB FRP ONLY   atau Download Disini (73KB)
       Download  Firmware FULL Mito A39 RAM3GB  + FRP   atau Download Disini

      4. Download SP-Flash-Tool Wajib pake versi ini Download Disini
      5. Driver bila belum punya instal dulu driver mtknya
      6.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
      7.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      Cara Kerja :
      1. Buat remove FRP verifikasi akun google Mito A39, hanya centang pada tab FRP, silahkan lihat video dibawah
      2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

       Cara Flash Bypass FRP Mito A39 via Flash Tool

      Log Read Firmware Mito A39
      Operation : Read Flash [ v1.58 ]

      1. Power Off Phone , Remove battery , Insert back
      2. Insert USB cable. In some cases require hold BootKey

      Wait for phone…
      Phone found! [ 6 ]
      Sync…
      Inital Boot Ok!
      BB_CPU_PID : 6737
      BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
      BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
      Processing BROM stage
      Settings for BROM configured!
      SecCfgVal : 0x00000000
      BromVer   : 0x00FF
      BLVersion : 0x0001
      PreLoader : Active [ Boot with PL ]
      BootLdrSS : NORMAL with PRELOADER
      Processing DA stage
      DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
      Sending and initialize DA …
      Running DA ver.4.2 on BBID : 0x93
      NAND Flash : NOT INSTALLED
      eMMC Flash : 3800011533445057A7CE00528F37DE48
      Initialize Memory …
      DRAM already initialized by Preloader
      DAgent sent , init HW now
      eMMC FlashIC initialized
      [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
      [eMMC] : FLASH_INF : [SAMSUNG] , R3DPW
      [eMMC] : FLASH_CID : 15010038575044335200CEA748DE538F
      [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
      [eMMC] : FLASH_LEN : 0x00000001D2000000
      [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
      DEV RID    : 0xFCC4CFBDB65CDF142A4065AA2C0B19C1
      INT RAM    : 0x00020000
      EXT RAM    : 0x40000000 [1 GiB]
      BOOT TYPE  : EMMC_FLASH_BOOT
      SOC VERIFY : C1
      Boot Ok!

      Reading Flash Content now …

      xGPT : Normalize settings Ok!

      Brand     : MITO A39
      ProdName  : MITO A39
      ProdModel : MITO A39
      Device    : MITO_A39
      AndroidVer: 6.0
      MTKxCPU   : MT6737M
      MTKxPRJ   : alps-mp-m0.mp1-V2.84_droi6737t.35g.m0_P78

      [Read Ok] : preloader_f5c81w_whx_postel.bin
      [Read Ok] : lk.bin
      [Read Ok] : boot.img
      [Read Ok] : recovery.img
      [Read Ok] : logo.bin
      [Read Ok] : secro.img
      [Read Ok] : tz1.img
      [Read Ok] : tz2.img
      [Read Ok] : system.img
      [Read Ok] : cache.img
      [Read Ok] : userdata.img

      [ScatCFG] : MT6737M / V1.1.2 / f5c81w_whx_postel / EMMC
      Android Info saved
      MAUI Meta DB saved
      HWConfig Info saved
      FW Size : 2237 MiB
      Scatter saved to : E:\mito\mito a39\MT6737M__MITO_A39__MITO_A39__MITO_A39__6.0__alps-mp-m0.mp1-V2.84_droi6737t.35g.m0_P78\

      Flash & Firmware Lava Iris 870

      MTKxCPU: MT6735
      ProdName: iris870
      ProdModel: iris870
      Device: iris870
      AndroidVer: 6.0
      Brand: Lava
      MTKxPRJ: alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6
      DisplayID: LAVA_iris870_INT_S120_17E04
      BoardID: iris870
      BuildDate: Thu May 11 10:00:44 CST 2017

      Bahan :

      1.  Download  Firmware Scattter Full Lava IRIS 870  atau Download Disini
      2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
      3.  Driver bila belum punya instal dulu driver mtknya
      4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
      5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      Cara Kerja :
      1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

      Cara Flash Lava Iris 870 via Flash Tool

      Log Read Firmware Lava Iris 870
      12:12:39 Connecting…
      12:12:39 CPU TYPE:MT6735
      12:12:39 Hardware version:CB00
      12:12:39 Software version:0000
      12:12:39 SecCfgVal :0x00000000
      12:12:39 BromVersion :0xFF
      12:12:39 BLVersion :0x01
      12:12:40 Boot downloading…
      12:12:44 EMMC_ID:0x150100513832334D42009594F22573E5
      12:12:44 EMMC_PRODUCT_NAME: 0x513832334D42
      12:12:44 EMMC_BOOT1_SIZE: 0x00400000
      12:12:44 EMMC_BOOT2_SIZE: 0x00400000
      12:12:44 EMMC_PRMB_SIZE: 0x00400000
      12:12:44 EMMC_GP1_SIZE: 0x00000000
      12:12:44 EMMC_GP2_SIZE: 0x00000000
      12:12:44 EMMC_GP3_SIZE: 0x00000000
      12:12:44 EMMC_GP4_SIZE: 0x00000000
      12:12:44 EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
      12:12:44 
      12:12:44 INT RAM: 128KB SDRAM    EXT RAM: 2GB DRAM
      12:12:44 Finding partition.
      12:12:44 MTKxCPU: MT6735
      12:12:44 ProdName: iris870
      12:12:44 ProdModel: iris870
      12:12:44 Device: iris870
      12:12:44 AndroidVer: 6.0
      12:12:45 Brand: Lava
      12:12:45 MTKxPRJ: alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6
      12:12:45 DisplayID: LAVA_iris870_INT_S120_17E04
      12:12:45 BoardID: iris870
      12:12:45 BuildDate: Thu May 11 10:00:44 CST 2017
      12:12:45 
      12:12:45 Empty/useless files we will reduce it.
      12:12:45 
      12:12:45 Reading  lk.bin .
      12:12:45 Reading  boot.img .
      12:12:47 Reading  recovery.img .
      12:12:49 Reading  logo.bin .
      12:12:50 Reading  secro.img .
      12:12:51 Reading  trustzone.bin .
      12:12:51 Reading  trustzone.bin .
      12:12:52 Reading  system.img .
      12:19:43 Reading  BPLGUInfo .
      12:19:45 Reading  userdata.img .
      12:19:47 Reading  cache.img .
      12:19:48 
      12:19:48 Android_Info.txt create success.
      12:19:48 File save path:D:\lava\lava 870\New folder (2)\MT6735_iris870_6.0_Lava_alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6_2018-03-03 13_12_45\
      12:19:48 Elapsed time: 00:07:18.