Flash & Firmware Coolpad X7-IOO / F101 Scatter File

Brand     : Coolpad
ProdName  : X7-I00
ProdModel : Coolpad F101
Device    : X7-I00
AndroidVer: 4.4.2
MTKxCPU   : MT6595
MTKxPRJ   : ALPS.KK1.MP11.V1.36
 
Bahan :

  1. Download  Firmware FULL Coolpad X7-IOO / F101 scatter atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Flash Coolpad X7-IOO / F101 via Flash Tool

Log Read Firmware Coolpad X7-IOO / F101
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6595
BB_CPU_NME : [MediaTek] MT6595_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.3.2 on BBID : 0x8C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147326505075D90516A426B
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A484147326505075D90516A426B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBDF47A7793935D391DE9DA520B
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Coolpad
ProdName  : X7-I00
ProdModel : Coolpad F101
Device    : X7-I00
AndroidVer: 4.4.2
MTKxCPU   : MT6595
MTKxPRJ   : ALPS.KK1.MP11.V1.36

[Read Ok] : preloader_cpx7_i00se.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6595 / V1.1.2 / cpx7_i00se / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2004 MiB
Scatter saved to : D:\New folder\MT6595__Coolpad__Coolpad_F101__X7-I00__4.4.2__ALPS.KK1.MP11.V1.36\

All done!

Flash Sunberry S7 MT6572 Nand

Device Brand   : S7
Device Model   : S7
Device CPU     : MT6572
Device IntName : S7
Device Version : 4.4.2
Device Compile : 3/29/2017 6:35:06 AM
Device Project : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Device ExtInfo : S7
Note : Cek fisik, samakan dengan photo yang kami upload

Bahan :

  1. Download  Firmware FULL Sunberry S7 atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Flash Sunberry S7 via Flash Tool

Log Read Firmware Sunberry S7
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xFCC4CFBD7459CAB2A42CEEEF5EC45E1B
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …
[Read Ok] : preloader_q3_m144_b18_gt019_s7world.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / q3_m144_b18_gt019_s7world / NAND
FW Size : 296 MiB

Brand     : S7
ProdName  : S7
ProdModel : S7
Device    : S7
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Android Info saved
Scatter saved to : D:\sunberry\s7\MT6572_NAND_S7__S7__S7__4.4.2__Q3_HS_GT013_S7_V0.7_M44_B18_20170329

Done!

Flash & Bypass FRP Himax H51i

FRP Himax H51i Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Brand     : HIMAX
ProdName  : H51i
ProdModel : H51i
Device    : H51i
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : KAAL570S_IDF_ID_EN_0.05.414

Bahan :

  1. Download  Firmware  Himax H51i FRP ONLY atau Download Disini
  2. Download  Firmware FULL Himax H51i + FRP atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Himax H51i, hanya centang pada tab FRP, silahkan lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Bypass FRP Only Himax H51i via Flash Tool

 -)  Cara Flash & Bypass FRP Himax H51i via Flash Tool

Log Read Info Himax H51i
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D42314563DC0742630926C4
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1E
[eMMC] : FLASH_CID : 150100524531424D4207DC63C4262363
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBD402528C25A59C39294D73F7B
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : HIMAX
ProdName  : H51i
ProdModel : H51i
Device    : H51i
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : KAAL570S_IDF_ID_EN_0.05.414

SECURITY :
IMEI_SW [1] : 357033063278592
IMEI_SW [2] : 357033063278600
BTMAC Addr  : 8CC5E1182810
WiFi MAC    : 8CC5E1182811

MODEM :
BaseBand  : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V48_P8_1_lwg_n

EXTRA :
LCD [0] : hx8394f_hd720_dsi_vdo
LCD [1] : ili9881c_hd720_dsi_vdo
LCD Res : 1280×720
TOUCH [0] : nt11205
TOUCH [1] : focaltech
CAM [0] : s5k3l8_mipi_raw
CAM [1] : s5k3m2_mipi_raw
CAM [2] : ov5670_mipi_raw
MODEM : konka6735_65u_3g_b1b8_4g_b1b3b8
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:25
Reconnect Power/Cable!