Clone / Copy LG G4 V10 MT6572 4.4.2

Brand     : G4
ProdName  : G4
ProdModel : G4
Device    : G4
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1.7

Bahan :
1. Download  Firmware Clone / Copy LG G4 V10 MT6572 4.4.2 atau Download Disini
2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Firmware Clone / Copy LG G4 V10 MT6572 4.4.2 via Flash Tool

Start  at : [12/7/2018 / 9:01:07 AM]
Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 17 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473261110143D0E634B29D
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , a2G4
[eMMC] : FLASH_CID : 90014A4834473261110143D0E634B29D
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD9E31FD664BC42B7723E39DAF
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : G4
ProdName  : G4
ProdModel : G4
Device    : G4
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1.7

EXTRA :
LCD [0] : jd9261_hsd_qhd_dsi_vdo
LCD [1] : ili9807_zx_ivo_qhd
LCD Res : 960×540
TOUCH [0] : GT9XX_v2
CAM [0] : gc0308_yuv
CAM [1] : gc2155mipi_yuv
CAM [2] : gc2145mipi_yuv
CAM [3] : ov5645_mipi_yuv
CAM [4] : gc0328_yuv
MODEM : magcomm72_cwet_kk_hspa_v81_b1b5
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR my_ZG cs_CZ nl_NL el_GR iw_IL fa_IR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH da_DK hr_HR sw_TZ lv_LV lt_LT hu_HU pl_PL sk_SK fi_FI sv_SE bg_BG ko_KR hdpi xhdpi -sw600dp -sw720dp

Done!

Flash & BYPASS FRP Mito A67

FRP Mito A67  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Model Name  : sp7731c_1h10_oversea
Model Brand : A67
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : A67

BAHAN :

A. BYPASS FRP ONLY ukuran PAC 1 MB

  1. Download Firmware SP7731C_MITO_A67_RAM512_6.0_V05_BYPASS_FRP_ONLY atau Download Disini (1MB)
  2. Download Firmware SP7731C_MITO_A67_RAM512_6.0_V01_BYPASS_FRP_ONLY atau Download Disini (1MB)
  3. Download Firmware SC7731C_MITO_A67_RAM1G_7.0_BYPASS_FRP_ONLY atau Download Disini (1MB)

B. Firmware PAC FULL

  1. Download PAC SP7731C_MITO_A67_RAM512_6.0_V01 atau Download disini
  2. Download PAC SP7731C_MITO_A67_RAM512_6.0_V05 atau Download disini
  3. Download PAC SC7731C_MITO_A67_RAM1G_7.0 atau Download disini

Tool :

  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Untuk FRP Mito A67 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
  • Boot volume (+)
  • Sinyal Aman

Cara Flash Bypass FRP Mito A67 via Research download 

 Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_oversea
Model Brand : A67
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : A67

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_360x640.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
[Read Ok] : logo6.bin
[Read Ok] : logo7.bin
[Read Ok] : logo8.bin
[Read Ok] : logo9.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2147 MiB
Saved to : E:\mito\mito a67\v05\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_A67\
Done!

Elapsed: 00:15:13