Flash Asus X009DA Dead via 9008 ~ CM2

Device Brand    : asus

Device Manufact.: asus

Device Model    : msm8916_32

Device CPU      : MSM8916

Device IntName  : WW_Phone

Device Version  : 6.0.1

CU_SWVer        : asus_x009da

Device Compile  : 3/29/2017 10:02:02 AM

Fix Asus X009DA matot via 9008, tool wajib pake CM2.

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Asus X009DA HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Flash Asus X009DA via dongle CM2

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 09F6ED7C
ID_BLOCK_L : 4B05FC6FC932A2372DC731FBDB7B5FDD
ID_BLOCK_L : 238EEACE428CCE9EE75A26A3FF8B1F7B
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : asus
ProdName  : WW_Phone
Device    : msm8916_32
AndroidVer: 6.0.1
Manufact. : asus
QLMxCPU   : MSM8916
Asus X009DA
DevInfo : MSM8916__asus__asus__ANDR_v6.0.1__msm8916_32__WW_Phone

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : fs_gc.img
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : asuskey.bin
[Read Ok] : asuskey2.bin
[Read Ok] : asuskey3.bin
[Read Ok] : asuskey4.bin
[Read Ok] : asuskey5.bin
[Read Ok] : asusfw.bin
[Read Ok] : asdf.bin
[Read Ok] : apd.bin
[Read Ok] : adf.bin
[Read Ok] : cache.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2112 MiB

Done!

syarat-dan-ketentuan

Flash & Firmware Bellphone BP 268

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

Bahan :

1. Download Firmware Full

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

  • Bellphone BP268 MTK versi Lain Download Di bawah
  1. MT6580__alps__BP268__er241c_m05_20170829_2017
  2.  

Cara Flash Bellphone BP628 via Flash Tool

Log Read Firmware BellPhone BP268
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473C346F0EC15151
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473C346F0EC15151
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD7AD1AE2CE3514D83B7F3DA9F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1382 MiB
Scatter saved to : D:\ANDROID LAIN2\Bellphone\BP268\MT6580__alps__BP268__keytak6580_weg_l__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24\

All done!

Cara Bypass Akun Google ( FRP ) & Flash Haier G51

FRP Haier G51  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand     : Haier
ProdName  : G51
ProdModel : HM-G553-FL
Device    : HM-G553-FL
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_len6737m.35g.n_P192

Bentukan : G51-H05 S013-ID

Bahan :
1. Download Bypass FRP Only

2. Download Firmware Full

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini
4. Driver bila belum punya instal dulu driver mtknya
5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Bypass Frp Haier G51 via Flash Tool

 Log Read Firmware Haier G51
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001153030574E6ABC0B4D0935D4D8
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00WN
[eMMC] : FLASH_CID : 150100514E5730304D0BBC6AD8D48409
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDF3B0BB28BD10F3E1E3C8300E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Haier
ProdName  : G51
ProdModel : HM-G553-FL
Device    : HM-G553-FL
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_len6737m.35g.n_P192

[Read Ok] : preloader_len6737m_35g_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / len6737m_35g_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2894 MiB
Scatter saved to : F:\haier\G51\MT6737M__Haier__HM-G553-FL__HM-G553-FL__7.0__alps-mp-n0.mp1-V1.0.2_len6737m.35g.n_P192\

All done!

Firmware Maxtron V15 SPD

Model Name  : V15

Model Brand : MAXTRON

Model Device: V15

AndrVersion : 7.0

BaseBand CPU: MAXTRON

Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932

Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (-)

Cara Flash Mxtron V15 via Research Download

Log Read Firmware Maxtron V15

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

syarat-dan-ketentuan

Flash & Firmware Maxtron V15 SPD

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash Maxtron V15 via Research Download

Log Read Firmware Maxtron V15 
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43