Firmware NOTE 10+ N-SERIES | MTK6763 FAKE | MT6572__alps__note10+__x6_v5_x50__4.4.2__HY_W116_M405_Z

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : note10+
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_M405_Z

Bahan :
1. Download ROM Firmware NOTE 10+  Scatter File HY_W116_M405_Z

2. Download ROM Firmware NOTE 10 /10+ Scatter File HY_W106_W20_Z

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 

 NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

Cara Flash note10+

Log Read Firmware NOTE 10+ N-SERIES

 Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 150100534A5330304D00093E37F0AFD7
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
[eMMC] : FLASH_CID : 150100534A5330304D00093E37F0AFD7
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA9315567FD64406997876C206FBBFB5D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : note10+
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_M405_Z

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 808 MiB
Scatter saved to : D:\ANDROID LAIN2\n-series\note 10+\New folder\MT6572__alps__note10+__x6_v5_x50__4.4.2__HY_W116_M405_Z\

All done!

Done!
Elapsed: 00:04:07

Firmware Infinix X5515F | MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0 | via Infinity CM2

Patch Level    : O11019
Display ID     : X5515F-H398F-O-180531V89
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 31.05.2018
Product Brand  : Infinix
Product Name   : H398
Product Device : Infinix-X5515F
Product Model  : Infinix X5515F
Product Manfct : INFINIX MOBILITY LIMITED
Product Board  : x5515c_h398
Board Platform : mt6739

MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0__X5515F-H398F-O-180531V89__O11019

Bahan :
1. Download Firmware  Infinix X5515F scatter file

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Read Firmware Flash Infinix X5515F

Log Read Firmware Infinix X5515F

Operation : Read Firmware [ v2.16 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Zion
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode  : SBC+SDA
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
BROM : SOCID : 7A2A873AF6742F68A891E853B471F701702C2B74E16FF977F89F52370E98A494
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 150100514536334D42033DD2D22B45F1
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : QE63MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 90D5A5FD600D86403414241E115C6FDF

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : X5515F-H398F-O-180531V89
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 31.05.2018
Product Brand  : Infinix
Product Name   : H398
Product Device : Infinix-X5515F
Product Model  : Infinix X5515F
Product Manfct : INFINIX MOBILITY LIMITED
Product Board  : x5515c_h398
Board Platform : mt6739

MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0__X5515F-H398F-O-180531V89__O11019

Read : preloader.bin
Read : recovery.img
Read : persist.img
ExtSparse : Compression ratio : 100%
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 21%
Read : system.img
ExtSparse : Compression ratio : 45%
Read : cache.img
Read : userdata.img

FW Size  : 2.11 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\InfinityBox\CM2MT2 v216\Backup\MT6739__INFINIX_MOBILITY_LIMITED__Infinix_X5515F__8.1.0__X5515F-H398F-O-180531V89__O11019\

Download Firmware ViVi R17S scatter file 

Device Brand   : 4G
Device Model   : pri6735_66c_m0
Device CPU     : MT6735
Device IntName : full_pri6735_66c_m0
Device Version : 6.0
Device Compile : 8/2/2019 12:17:10 PM
Device Project : alps-mp-m0.mp1-V2.39.1_pri6735.66c.m0
Device ExtInfo : R17S

Bahan :
1. Download Firmware ViVi R17S scatter file

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash R17s

Log Read Firmware ViVi R17S

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 9 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D33323881C80042F7871FF2
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D4200C881F21FC2F7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBDDF4418F15981EB1051A6EC34
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : 4G
ProdName  : full_pri6735_66c_m0
ProdModel : R17S
Device    : pri6735_66c_m0
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : alps-mp-m0.mp1-V2.39.1_pri6735.66c.m0

[Read Ok] : preloader_pri6735_66c_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / pri6735_66c_m0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 4256 MiB
Scatter saved to : D:\New folder\New folder (2)\MT6735__4G__R17S__pri6735_66c_m0__6.0__alps-mp-m0.mp1-V2.39.1_pri6735.66c.m0\

All done!

Firmware Wiko TOMMY 3 Android 7 & 8

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

Bahan :
1. Download Firmware Wiko TOMMY 3   Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Operation : Read Firmware Wiko TOMMY 3
ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
BROM : SOCID : C3938EA812AC5827BB680B6D94C6BEA4738886B3148C5C69E46DEA5371E1FF73
AGENT : Look for suitable BootChain in DA …
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: 150100464536324D420365ADF2EB8521
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : A89DCC1BDB59F641EDD63BCB719C87E3

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

MT6739__TINNO__K600AG__8.1.0__O11019__k600_go

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : misc.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 21%
Read : system.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : userdata.img

FW Size  : 1.41 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\wiko\tommy 3\MT6739__TINNO__K600AG__8.1.0__O11019__k600_go\