Firmware SHARP SH-C03 / SHARP_SH_C03_MT6765__TCL__A.210812.016__uze

Patch Level : SP1A.210812.016
Display ID : SP1A.210812.016 release-keys
SW Version : NAAC
Ver. CodeName : REL
Ver. Release : 12
Sec. Patch : 2021-11-05
Build Time : 11.01.2022
Product Info : cruze
SW : vnd_cruze-user 12 SP1A.210812.016 NAAC release-keys
Product Manfct : TCL
Product Board : MT6762
Board Platform : mt6765

MT6765__TCL__A.210812.016__uze
 

Bahan :
1. Download ROM Firmware Firmware SHARP SH-C03  Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE : boot vol + /-

 Log read Firmware SHARP SH-C03

 Operation : Read Firmware [ v2.37 ]
[+] ExtSparse
[-] ForceRead

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device
Waiting for device connection…

PTFN: MTK USB Port (COM27)
MODE: BOOTROM
PORT: 27
Waiting BOOT ack…
BROM: Skip ACK verify
BROM: Init BROM
BROM init passed
     CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
     CODE: Cervino
     TYPE: MODERN [RAPHAEL]

BROM: MEID: 26C0F31EB5F3A0D1A24838C89D3638DA
BROM: SecLevel: 0x000000E7
BROM: SecMode : SBC+SLA+SDA+EXT
BROM: BROM|BL : 0x05|0xFE
BROM: BOOTROM
BROM: SOCID: AB671DCEE2D60800DDA630C39B9BA2DA349020FCCF8479C06EED0EB5A90C3437
BROM: SLA: Local Auth
BROM: SLA: Starting Auth
BROM: SLA: Auth Passed
BROM: SEC: 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Looking for suitable BootChain in DA…
AGENT : [0656ff20] C:\InfinityBox\CM2MT231\boot\0_base\BASE_v2112\MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA…
BROM: DA sent
BROM: Transfer control to DA…
     DA : AGENT started
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized

        EMMC: CID: F40122426977696E201182AFBC1CA8E1
        EMMC: VEN: Biwin : OEM: 34 : ID: 426977696E20 : PRV: 0x11
        EMMC: VEN: Biwin : Biwin
        EMMC: SNN: 2192555036 ( 0x82AFBC1C ) MF: 10/2021

     EMI: FireFly preloader_cruze.bin with 7 memory type(s) supported
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed

DA : BOOT to 2nd DA…
DA : 2ND stage confirmed
DA : SYNC with DA passed
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID: F40122426977696E201182AFBC1CA8E1
        EMMC: VEN: Biwin : OEM: 34 : ID: 426977696E20 : PRV: 0x11
        EMMC: VEN: Biwin : Biwin
        EMMC: SNN: 2192555036 ( 0x82AFBC1C ) MF: 10/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x748000000 [ 29.13 GB ]

     CHIP: MT6765 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0766
     CODE: Cervino
     TYPE: MODERN [RAPHAEL]
     RNID: E6CB2B578C14730CDEAF78A0E97662DF


DA: USB: HIGH-SPEED

Boot done

Info: Device support slots
Info: Active slot : a

Patch Level : SP1A.210812.016
Display ID : SP1A.210812.016 release-keys
SW Version : NAAC
Ver. CodeName : REL
Ver. Release : 12
Sec. Patch : 2021-11-05
Build Time : 11.01.2022
Product Info : cruze
SW : vnd_cruze-user 12 SP1A.210812.016 NAAC release-keys
Product Manfct : TCL
Product Board : MT6762
Board Platform : mt6765

MT6765__TCL__A.210812.016__uze

Read: preloader.bin
Read: oembin.img
Read: simlock.img
Read: persist.img
ExtSparse : Compression ratio : 58%
Read: tcdpersist.img
ExtSparse : Compression ratio : 93%
Read: minipersist.img
ExtSparse : Compression ratio : 99%
Read: lcmreserved.img
Read: proinfo.img
Read: efuse.img
Read: swversion.img
Read: nvram.bin
Read: oempersist.img
ExtSparse : Compression ratio : 96%
Read: smart.img
Read: logo.bin
Read: md1rom.img
Read: spmfw.img
Read: lcmparameter.img
Read: tinysys-scp.bin
Read: sspm.img
Read: gz.img
Read: lk.bin
Read: boot.img
Read: dtbo.img
Read: tz.img
Read: vbmeta.img
Read: vbmeta_system.img
Read: vbmeta_vendor.img
Read: super.img
ExtSparse : Compression ratio : 8%
Read: odm.img
ExtSparse : Compression ratio : 90%
Read: product.img
ExtSparse : Compression ratio : 1%
Read: vendor.img
ExtSparse : Compression ratio : 1%
Read: system.img
ExtSparse : Compression ratio : 1%
Read: preload.img
ExtSparse : Compression ratio : 1%
Read: oem.img
ExtSparse : Compression ratio : 15%
Read: userdata.img

FW Size: 19.71 GB
Android Info saved: _Android_info.txt
Scatter: MT6765_Android_scatter.txt
Saved to: E:\SHARP SH-C03\MT6765__TCL__A.210812.016__uze\
Verify firmware [MT6765__TCL__A.210812.016__uze]…
Finished
Verify device config…
Finished
Done
Elapsed: 00:35:31

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout /  Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout /  Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout /  Ubah )

Connecting to %s