Firmware COPY SAMSUNG G960U S9+ MT6580

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G960U
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

Bahan :
1. Download ROM Firmware SAMSUNG G960U S9+ | MT6580  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Log Read info Firmware SAMSUNG G960U S9+ | MT6580

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 26 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464531324D420D55309BE3542F
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM21E
[eMMC] : FLASH_CID : 150100464531324D420D55309BE3542F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xA931556757DE1519031FDD73695CB5A8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G960U
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1697 MiB
Scatter saved to : F:\111NEW ANDRO\ANDROID LAIN2\sam kopyor\MT6580__samsung__SM-G960U__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55\

All done!

Firmware Aldo S12 ~ MT6737M

Patch Level    : MRA58K
Display ID     : HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022
Ver. CodeName  : REL
Ver. Release   : 8.1
Sec. Patch     : 2017-11-05
Build Time     : 22.10.2020
Product Model  : S12
Product Brand  : S12
Product Name   : full_y3be_v11_f_hy_x15
Product Device : y3be_v11_f_hy_x15
Product Manfct : ALDO
Board Platform : mt6737m
Product Info   : y3be_v11_f_hy_x15

MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15

Bahan :
1. Download ROM Firmware Welcome Oppo P48pro Scatter File,

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar  SHOPEE PAY / GOPAY 20k

Operation : Read Firmware Aldo S12 [ v2.33 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 13014E51334A3937561006F35219869F
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

        EMMC: CID : 13014E51334A3937561006F35219749F
        EMMC: VEN : MICRON : OEM : 78 : ID : 51334A393756 : PRV : 0x10
        EMMC: VEN : MICRON : Q3J97V
        EMMC: SNN : 116609561 ( 0x06F35219 ) , MF : 7/2017

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 378AACE7AC6BDA36EFE5DFCACAB0775F

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022
Ver. CodeName  : REL
Ver. Release   : 8.1
Sec. Patch     : 2017-11-05
Build Time     : 22.10.2020
Product Model  : S12
Product Brand  : S12
Product Name   : full_y3be_v11_f_hy_x15
Product Device : y3be_v11_f_hy_x15
Product Manfct : ALDO
Board Platform : mt6737m
Product Info   : y3be_v11_f_hy_x15

MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : userdata.img

FW Size  : 2.12 GB
Android Info saved : _Android_info.txt
Scatter  : MT6737M_Android_scatter.txt
Saved to : E:\New folder\MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15\

Done!

Firmware S21 ULTRA | MT6572 Scatter File

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : S21 Ultra
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_N31-S21_Ultra-HSD

 Bahan :
1. Download ROM Firmware S21 ULTRA | MT6572  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 26 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E594812A1693A428F77
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594812A1693A428F77
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xA931556787B18E4F93EFDE5376FD2D5E
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : S21 Ultra
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_N31-S21_Ultra-HSD

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : E:\New folder\MT6572__alps__S21_Ultra__x6_v5_x50__4.4.2__HY_W116_N31-S21_Ultra-HSD\

All done!

Done!
Elapsed: 00:03:55

Firmware Vava iCherry X1 MT6580

Patch Level    : MRA58K
Display ID     : Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 13.12.2018
Product Model  : iCherry_X1
Product Brand  : VAVA
Product Name   : iCherry_X1
Product Device : iCherry_X1
Product Manfct : VAVA
Board Platform : mt6580
Product Info   : iCherry_X1

MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1

 Bahan :
1. Download ROM Firmware Vava iCherry X1 | MT6580  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 
Operation : Read Firmware Vava iCherry X1[ v2.29 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 5100011542363133F6F20142B7C3D8B2
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

        EMMC: CID : 15010051333136424201F2F6B2D8C3B7
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 513331364242
        EMMC: VEN : SAMSUNG : Q316BB
        EMMC: SNN : 4076253912 ( 0xF2F6B2D8) , MF : 12/2016

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : BFF77AAA8AA2F2032AD52D1DAC86EE1E

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 13.12.2018
Product Model  : iCherry_X1
Product Brand  : VAVA
Product Name   : iCherry_X1
Product Device : iCherry_X1
Product Manfct : VAVA
Board Platform : mt6580
Product Info   : iCherry_X1

MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 43%
Read : cache.img
Read : userdata.img

FW Size  : 1.48 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : D:\New folder (2)\New folder\MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1\

Done!
Elapsed: 00:11:09

Firmware Infinix X695C NOTE 10 Pro | Infinix_X695C__11__X695C-H854JK-R-GL-211019V307

Product Brand  : Infinix
Product Device : Infinix-X695C
Product Model  : Infinix X695C
Product Name   : X695C-GL
Patch Level    : RP1A.200720.011
Display ID     : X695C-H854JK-R-GL-211019V307
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 19.10.2021
Product Info   : x695_h854
Product Board  : Infinix-X695C
Board Platform : mt6785
Product Manfct : INFINIX MOBILITY LIMITED

Bahan :
1. Download ROM Firmware X695C NOTE 10 Pro Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

 boot vol + /-

 Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Krug
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B5C0E1AC1F5541EF283C5D448F1370C8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : EE3ED7960722888658B2B8F1BE2FA2B8C7BA183DA10A2D0D8B3A136E9A9683AF
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6785
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x695_h854.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        UFS: AD014839485131354146414D42444152
        UFS:
             VEN  : 0x01AD
             VID  : H9HQ15AFAMBDAR
             IFW  : A002
             LU0  : 0x00400000 [ 4.00 MB ]
             LU1  : 0x00400000 [ 4.00 MB ]
             LU2  : 0x1DCB000000 [ 119.17 GB ]
             FSN  : 2010B1B09A80
             REG  : 0x101010000

        CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : FB64510978E1B3D9AE7F76EBE7CC0E4F

DA : USB : HIGH-SPEED

Boot done!

Info : Device support slots
Info : Active slot : a

Product Brand  : Infinix
Product Device : Infinix-X695C
Product Model  : Infinix X695C
Product Name   : X695C-GL
Patch Level    : RP1A.200720.011
Display ID     : X695C-H854JK-R-GL-211019V307
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 19.10.2021
Product Info   : x695_h854
Product Board  : Infinix-X695C
Board Platform : mt6785
Product Manfct : INFINIX MOBILITY LIMITED

MT6785__INFINIX_MOBILITY_LIMITED__Infinix_X695C__11__X695C-H854JK-R-GL-211019V307__RP1A.200720.011__x695_h854

Read : preloader.bin
Read : proinfo.img
Read : tkv.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : cam_vpu1.img
Read : cam_vpu2.img
Read : cam_vpu3.img
Read : gz.img
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : nvram.bin
Read : super.img
ExtSparse : Compression ratio : 1%
Read : tranfs.img
Read : userdata.img

FW Size  : 7.94 GB
Android Info saved : _Android_info.txt
Scatter  : MT6785_Android_scatter.txt
Saved to : D:\infinix\x695c\MT6785__INFINIX_MOBILITY_LIMITED__Infinix_X695C__11__X695C-H854JK-R-GL-211019V307__RP1A.200720.011__x695_h854\

Done!
Elapsed: 00:15:38

Firmware M11 Ultra PRO Scatter file

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : M11 Ultra Pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106C_P916-M11-Ultra-Pro-FW

 Bahan :
1. Download ROM Firmware Firmware M11 Ultra PRO Scatter file | FIX / REPAIR Blank Putih / White Screen

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3038470F323732348179
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G80ME
[eMMC] : FLASH_CID : 45010053454D3038470F323732348179
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD23AB955CAB6DE235B22BF513
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : M11 Ultra Pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106C_P916-M11-Ultra-Pro-FW

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : E:\New folder\New folder (3)\MT6572__alps__M11_Ultra_Pro__x6_v5_x50__4.4.2__HY_W106C_P916-M11-Ultra-Pro-FW\

All done!

Firmware Infinix X657B Smart 5

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Bahan :
1. Download ROM Firmware Infinix X657B SMART 5 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 9E379253896D0E62883C5030B80DF3B8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : DA37166FA857A38B35ED1992D66CFB88D208EB05A3CCE2A9F845DABD87AC04DD
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657b_h6117.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 700100443236303332102E097FDAC7CF
        EMMC: VEN : KINGSTON : OEM : 0 : ID : 443236303332
        EMMC: VEN : KINGSTON : D26032
        EMMC: SNN : 772374490 ( 0x2E097FDA) , MF : 12/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x750000000 [ 29.25 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : ED4F09CDD019FF2FAEDBD75E63C000D3

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 17%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 2.87 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\X657B\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117\

Done!
Elapsed: 00:06:42

sumber : https://kangsuper.blogspot.com/2022/01/firmware-infinix-x657b-smart-5.html

Firmware Oppo A11K CPH2071 Scatter File

NO SS

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-07-05
Product Manfct : OPPO
Build Time     : 01.07.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.59_0590_202107012325
Display ID     : CPH2083EX_11_A.59
Display ID     : CPH2083EX_11_A.59_210701
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083

Bahan :
1. Download ROM Firmware Oppo A11K CPH2071 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE : boot vol + /-

Operation : Read Firmware [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 2C1117FDAA073A108524769B16B5F6D0
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 12D10C70EAC403BF3E84873D4FB769D3089BCC14B4B8D435372A13ED75E786E8
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19451.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 1501003458364B4D42032A95CA908783
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 3458364B4D42
        EMMC: VEN : SAMSUNG : 4X6KMB
        EMMC: SNN : 714459792 ( 0x2A95CA90) , MF : 8/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : CED260663574BE2FD3BDB2A1809A079F

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-07-05
Product Manfct : OPPO
Build Time     : 01.07.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.59_0590_202107012325
Display ID     : CPH2083EX_11_A.59
Display ID     : CPH2083EX_11_A.59_210701
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 74%
Read : opporeserve3.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 28%
Read : system.img
ExtSparse : Compression ratio : 25%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.58 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo a11k cph2083 menu cph2071\MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083\

Done!
Elapsed: 00:14:23

sumber : https://kangsuper.blogspot.com/2022/01/firmware-oppo-a11k-cph2071-scatter-file.html

Firmware Oppo A12 CPH2083 Scatter File

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 09.11.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.65_0650_202111091923
Display ID     : CPH2083EX_11_A.65
Display ID     : CPH2083EX_11_A.65_211109
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083

Bahan :
1. Download ROM Firmware Oppo A12 CPH2083 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-


Operation : Read Firmware [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 957F16CB437410A86C0F670E83CE2ED9
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 46FA856F59FCF471DC94D696E94B75391DCD79B5329AD327F46397028D39C360
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19451.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 90014A68423861503E032047D8EA37B1
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 541579498 ( 0x2047D8EA) , MF : 3/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 1B4EF74BA222E12F363B1961D715FB01

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 09.11.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.65_0650_202111091923
Display ID     : CPH2083EX_11_A.65
Display ID     : CPH2083EX_11_A.65_211109
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 68%
Read : opporeserve3.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 28%
Read : system.img
ExtSparse : Compression ratio : 25%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.59 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo A12 CPH2083\MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083\

Done!
Elapsed: 00:13:30

sumber : https://kangsuper.blogspot.com/2022/01/firmware-oppo-a12-cph2083-scatter-file.html