BYPASS FRP Maxtron V13 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Model Name  : sp7731c_c7367_fwvga_oversea

Model Brand : S50H

Model Device: sp7731c_c7367_fwvga

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : MAXTRON_V13_V04_20170824

Model Ext   : MAXTRON_V13

BYPASS FRP Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

===============================================

1. MAXTRON V13 ( Gambar dibawah)

A. BYPASS FRP ONLY ukuran PAC 1 MB

ONLY SC7731C

1. Download Firmware PAC Maxtron V13_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. Firmware PAC FULL

1. Download SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824 atau Download disini

===============================================

2. MAXTRON V13+ ( Gambar dibawah)

A. BYPASS FRP ONLY ukuran PAC 1 MB

ONLY SC7731C

1. Download Firmware PAC SC7731C_Maxtron_V13+_V3.0_20171205_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. Firmware PAC FULL

1. Download SC7731C_Maxtron_V13+_V3.0_20171205 atau Download disini

===============================================

Tool :

1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
2. Tutorial Flash via research here
3. Driver SPD by InfinityBox
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

• Untuk FRP Maxtron V13 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
• Boot volume (+/-)
•  Sinyal Aman

Cara Bypass Maxtron V13  via Research Download

Log Read Flash Maxtron V13

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
====  Wait for phone…
Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
lashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_c7367_fwvga_oversea
Model Brand : S50H
Model Device: sp7731c_c7367_fwvga
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MAXTRON_V13_V04_20170824
Model Ext   : MAXTRON_V13
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1553 MiB
Saved to : D:\maxtron\Maxtron V13\SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824_MAXTRON_V13\
Done!