Firmware COPY SAMSUNG G960U S9+ MT6580

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G960U
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

Bahan :
1. Download ROM Firmware SAMSUNG G960U S9+ | MT6580  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Log Read info Firmware SAMSUNG G960U S9+ | MT6580

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 26 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464531324D420D55309BE3542F
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM21E
[eMMC] : FLASH_CID : 150100464531324D420D55309BE3542F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xA931556757DE1519031FDD73695CB5A8
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : samsung
ProdName  : hero2qltezc
ProdModel : SM-G960U
Device    : hero2qltechn
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

[Read Ok] : preloader_hct6580_weg_a_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / hct6580_weg_a_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1697 MiB
Scatter saved to : F:\111NEW ANDRO\ANDROID LAIN2\sam kopyor\MT6580__samsung__SM-G960U__hero2qltechn__7.0__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55\

All done!

Firmware Aldo S12 ~ MT6737M

Patch Level    : MRA58K
Display ID     : HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022
Ver. CodeName  : REL
Ver. Release   : 8.1
Sec. Patch     : 2017-11-05
Build Time     : 22.10.2020
Product Model  : S12
Product Brand  : S12
Product Name   : full_y3be_v11_f_hy_x15
Product Device : y3be_v11_f_hy_x15
Product Manfct : ALDO
Board Platform : mt6737m
Product Info   : y3be_v11_f_hy_x15

MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15

Bahan :
1. Download ROM Firmware Welcome Oppo P48pro Scatter File,

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar  SHOPEE PAY / GOPAY 20k

Operation : Read Firmware Aldo S12 [ v2.33 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6735
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 13014E51334A3937561006F35219869F
DAInf: 4 : 2 : 155
     DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

        EMMC: CID : 13014E51334A3937561006F35219749F
        EMMC: VEN : MICRON : OEM : 78 : ID : 51334A393756 : PRV : 0x10
        EMMC: VEN : MICRON : Q3J97V
        EMMC: SNN : 116609561 ( 0x06F35219 ) , MF : 7/2017

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        CHIP : MT6735 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 378AACE7AC6BDA36EFE5DFCACAB0775F

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022
Ver. CodeName  : REL
Ver. Release   : 8.1
Sec. Patch     : 2017-11-05
Build Time     : 22.10.2020
Product Model  : S12
Product Brand  : S12
Product Name   : full_y3be_v11_f_hy_x15
Product Device : y3be_v11_f_hy_x15
Product Manfct : ALDO
Board Platform : mt6737m
Product Info   : y3be_v11_f_hy_x15

MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : system.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : userdata.img

FW Size  : 2.12 GB
Android Info saved : _Android_info.txt
Scatter  : MT6737M_Android_scatter.txt
Saved to : E:\New folder\MT6737M__ALDO__S12__8.1__HY_X15_Y3_ALDO_S12_32G_3G_FW+_V01_20201022__MRA58K__y3be_v11_f_hy_x15\

Done!

Firmware Infinix X657B Smart 5

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Bahan :
1. Download ROM Firmware Infinix X657B SMART 5 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 9E379253896D0E62883C5030B80DF3B8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : DA37166FA857A38B35ED1992D66CFB88D208EB05A3CCE2A9F845DABD87AC04DD
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657b_h6117.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 700100443236303332102E097FDAC7CF
        EMMC: VEN : KINGSTON : OEM : 0 : ID : 443236303332
        EMMC: VEN : KINGSTON : D26032
        EMMC: SNN : 772374490 ( 0x2E097FDA) , MF : 12/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x750000000 [ 29.25 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : ED4F09CDD019FF2FAEDBD75E63C000D3

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 17%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 2.87 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\X657B\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117\

Done!
Elapsed: 00:06:42

sumber : https://kangsuper.blogspot.com/2022/01/firmware-infinix-x657b-smart-5.html

Firmware Oppo A11K CPH2071 Scatter File

NO SS

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-07-05
Product Manfct : OPPO
Build Time     : 01.07.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.59_0590_202107012325
Display ID     : CPH2083EX_11_A.59
Display ID     : CPH2083EX_11_A.59_210701
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083

Bahan :
1. Download ROM Firmware Oppo A11K CPH2071 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE : boot vol + /-

Operation : Read Firmware [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 2C1117FDAA073A108524769B16B5F6D0
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 12D10C70EAC403BF3E84873D4FB769D3089BCC14B4B8D435372A13ED75E786E8
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19451.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 1501003458364B4D42032A95CA908783
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 3458364B4D42
        EMMC: VEN : SAMSUNG : 4X6KMB
        EMMC: SNN : 714459792 ( 0x2A95CA90) , MF : 8/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : CED260663574BE2FD3BDB2A1809A079F

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-07-05
Product Manfct : OPPO
Build Time     : 01.07.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.59_0590_202107012325
Display ID     : CPH2083EX_11_A.59
Display ID     : CPH2083EX_11_A.59_210701
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 74%
Read : opporeserve3.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 28%
Read : system.img
ExtSparse : Compression ratio : 25%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.58 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo a11k cph2083 menu cph2071\MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.59_210701__PPR1.180610.011__CPH2083\

Done!
Elapsed: 00:14:23

sumber : https://kangsuper.blogspot.com/2022/01/firmware-oppo-a11k-cph2071-scatter-file.html

Firmware Oppo A12 CPH2083 Scatter File

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 09.11.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.65_0650_202111091923
Display ID     : CPH2083EX_11_A.65
Display ID     : CPH2083EX_11_A.65_211109
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083

Bahan :
1. Download ROM Firmware Oppo A12 CPH2083 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-


Operation : Read Firmware [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 957F16CB437410A86C0F670E83CE2ED9
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 46FA856F59FCF471DC94D696E94B75391DCD79B5329AD327F46397028D39C360
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765_19451.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 90014A68423861503E032047D8EA37B1
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68423861503E
        EMMC: VEN : HYNIX : hB8aP>
        EMMC: SNN : 541579498 ( 0x2047D8EA) , MF : 3/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 1B4EF74BA222E12F363B1961D715FB01

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : PPR1.180610.011
Ver. CodeName  : REL
Ver. Release   : 9
Sec. Patch     : 2021-11-05
Product Manfct : OPPO
Build Time     : 09.11.2021
Product Brand  : OPPO
Product Model  : CPH2083
Product Info   : CPH2083
Product Name   : CPH2083
Product Device : OP4BFB
SW OTA Version : CPH2083PUEX_11.A.65_0650_202111091923
Display ID     : CPH2083EX_11_A.65
Display ID     : CPH2083EX_11_A.65_211109
Kernel Info    : 4.9.117

MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 68%
Read : opporeserve3.img
Read : oppo_custom.img
Read : persist.img
ExtSparse : Compression ratio : 91%
Read : proinfo.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : odm.img
ExtSparse : Compression ratio : 100%
Read : vendor.img
ExtSparse : Compression ratio : 28%
Read : system.img
ExtSparse : Compression ratio : 25%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.59 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo A12 CPH2083\MT6765__OPPO__CPH2083__9__CPH2083EX_11_A.65_211109__PPR1.180610.011__CPH2083\

Done!
Elapsed: 00:13:30

sumber : https://kangsuper.blogspot.com/2022/01/firmware-oppo-a12-cph2083-scatter-file.html

ROM INFINIX X692 / INFINIX NOTE 8 Scatter File / Flash tool

NO SS

Product Brand  : Infinix
Product Device : Infinix-X692
Product Model  : Infinix X692
Product Name   : X692-GL
Patch Level    : QP1A.190711.020
Display ID     : X692-H694KLMX-Q-GL-211109V340
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-11-05
Build Time     : 09.11.2021
Product Info   : x692_h694
Product Board  : Infinix-X692
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X692__10__X692-H694KLMX-Q-GL-211109V340__QP1A.190711.020__x692_h694

Bahan :
1. Download ROM Firmware INFINIX X692 / INFINIX NOTE 8 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE : boot vol + /-

 Read Firmware INFINIX X692 via CM2

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : BE497F300C8BCA8124F0A64448954A67
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 7C8EE16EBE6BFC2EB4DB1219DE0F7396668E777406155888897319FD32900F52
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_
     EMI : CNT : 0010
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A68433861503E032E519CDA56B7
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
        EMMC: VEN : HYNIX : hC8aP>
        EMMC: SNN : 777100506 ( 0x2E519CDA) , MF : 5/2019

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 38D83ABF7C040D8B7B5832CAED279069

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X692
Product Model  : Infinix X692
Product Name   : X692-GL
Patch Level    : QP1A.190711.020
Display ID     : X692-H694KLMX-Q-GL-211109V340
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-11-05
Build Time     : 09.11.2021
Product Info   : x692_h694
Product Board  : Infinix-X692
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X692__10__X692-H694KLMX-Q-GL-211109V340__QP1A.190711.020__x692_h694

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 98%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 5.42 GB
Android Info saved : _Android_info.txt
Scatter  : MT6768_Android_scatter.txt
Saved to : D:\infinix\x692\MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X692__10__X692-H694KLMX-Q-GL-211109V340__QP1A.190711.020__x692_h694\

Done!
Elapsed: 00:11:25

sumber : https://kangsuper.blogspot.com/2021/12/firmware-infinix-x692-infinix-note-8.html

Firmware Samsung A115F / A11 QFIL / 9008

Device               : Samsung Galaxy A11 (SM-A115F)

Software           : RP1A.200720.012.A115FXXU2BUE1, A115FXXU2BUE1 [Mon May  3 19:44:28 KST 2021]
Android Ver.     : 11
Patch Level       : 2021-04-01

Bahan :
1. Download ROM Firmware Samsung A115F / A11 QFIL / 9008 | QFIL QUALCOMM FILE ,

2. Tool pake UMT / UFI /HYDRA atau sejenisnya

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE :

 Testpoin gambar diatas

Read Firmware  Samsung Galaxy A11 (SM-A115F)

Device    : Samsung Galaxy A11 (SM-A115F)
Operation    : Read Firmware
Checking for existing devices…Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port    : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info    : Qualcomm Incorporated, qcusbser.sys, 2.1.2.0
Connecting to phone…OK
Waiting for response…Ignored
Init Handshake Sequence…OK
Hardware ID    : E1A00900 [8953] 00002000
OPK_DATA    : 7A1DF77CBFBB0788FC8EA8D75792F665B38495C74C24E98E5908F89AAC71A27C
Initializing Protocol…OK
Using Auto Loader Selection [1]
Preparing Loader…Done
Sending Loader [8953_050]…Done
Executing Loader…OK
Hardware    : 8953, EMMC, 32 GB
LU Count    : 3 [0x03A3E000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info    : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table…OK
USERDATA    : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information…OK
Software    : RP1A.200720.012.A115FXXU2BUE1, A115FXXU2BUE1 [Mon May  3 19:44:28 KST 2021]
Android Ver.    : 11
Patch Level    : 2021-04-01
Reading [sbl1]…Done
Reading [rpm]…Done
Reading [tz]…Done
Reading [devcfg]…Done
Reading [dsp]…Done
Reading [mdtp]…Done
Reading [sbl1bak]…Done
Reading [rpmbak]...Done
Reading [tzbak]…Done
Reading [devcfgbak]…Done
Reading [lksecapp]…Done
Reading [cmnlib]…Done
Reading [cmnlib64]…Done
Reading [keymaster]…Done
Reading [aboot]…Done
Reading [lksecappbak]…Done
Reading [cmnlibbak]…Done
Reading [cmnlib64bak]…Done
Reading [keymasterbak]…Done
Reading [abootbak]…Done
Reading [ddr]…Done
Reading [sec]…Done
Reading [splash]…Done
Reading [persist]…Done
Reading [misc]…Done
Reading [recovery]…Done
Reading [boot]…Done
Reading [modem]…Done
Reading [super]…Done
Reading [cache]…Done
Reading [gpt_main0]…Done
Reading [gpt_back0]…Done
Reading [gpt_main1]…Done
Reading [gpt_back1]…DoneSevere Error!
Reading [gpt_main2]…Done
Reading [gpt_back2]…DoneSevere Error!
Saved to    : E:\New folder (2)\_RP1A.200720.012.A115FXXU2BUE1_2021-04-01\
Operation Finished.
QcFire Ver. 7.4

sumber : https://kangsuper.blogspot.com/2021/12/firmware-samsung-a115f-a11-qfil-9008.html

Firmware REALME C25 RMX3191 Scatter File

 NO SS

Product Board  : oppo6768
Board Platform : mt6768
Product Brand  : alps
Product Device : oppo6768
Product Manfct : alps
Product Model  : oppo6768
Product Name   : vnd_oppo6768
MT6768__RMX3191_export_11_A.09_202103212359

Bahan :
1. Download ROM Firmware REALME C25 RMX3191 Scatter File

2. Tool pake Infinity CM2 atau Flasher sejenis

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

REALME C25 boot vol+ atau + /-

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

 Log Read Firmware REALME C25 RMX3191

 Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 245B3BFC3FC2D93D3E24A8AA3F21A2B5
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 876FA13ED8268D9033629668F80D7B0634793B74E8038C84AC07F552C684038C
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6768.bin
     EMI : CNT : 0008
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 1501004450364441420228DDCC182815
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445036444142
        EMMC: VEN : SAMSUNG : DP6DAB
        EMMC: SNN : 685624344 ( 0x28DDCC18) , MF : 2/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : 681AD52467CE506CD21ADA4DCAE162D

DA : USB : HIGH-SPEED

Boot done!

Product Board  : oppo6768
Board Platform : mt6768
Product Brand  : alps
Product Device : oppo6768
Product Manfct : alps
Product Model  : oppo6768
Product Name   : vnd_oppo6768


MT6768__RMX3191_export_11_A.09_202103212359

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 73%
Read : oppo_custom.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 51%
Read : proinfo.img
Read : nvram.bin
Read : cdt_engineering.img
Read : logo.bin
Read : ocdt.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : lk.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 37%
Read : cache.img
Read : userdata.img

FW Size  : 6.40 GB
Android Info saved : _Android_info.txt
Scatter  : MT6768_Android_scatter.txt
Saved to : D:\oppo new\realme c25 rmx3191\MT6768__RMX3191_export_11_A.09_202103212359\

Done!
Elapsed: 00:17:43

sumber : https://kangsuper.blogspot.com/2021/12/firmware-realme-c25-rmx3191scatter-file.html

Firmware Samsung A013G / A01 CORE Scatter File

                                                   LETAK TEST POIN SAMSUNG A013G

Product Brand  : samsung
Product Model  : SM-A013G
Product Name   : a01corextc
Product Device : a01core
Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020.A013GXXS4AUJ1
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-10-01
Build Time     : 07.10.2021
Product Info   : a01core
Product Board  : k39tv1_bsp_1g_titan
Board Platform : mt6739
Product Manfct : samsung

MT6739__samsung__SM-A013G__10__QP1A.190711.020.A013GXXS4AUJ1__QP1A.190711.020__a01core

Bahan :
1. Download ROM Firmware Samsung A013G / A01 CORE Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

 Testpoin gambar diatas

Operation : Read Firmware [ v2.31 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
     CODE : Zion
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 191AAF496AA3E8CAFA039B177D792C8B
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E313295166D2B189EB80EC548ADF612106B8729CB70815247075B92F9F0B1493
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_k39tv1_bsp_1g_titan.bin
     EMI : CNT : 0007
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: CID : 150100464536324D4200A9D0D38F47CB
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 464536324D42
        EMMC: VEN : SAMSUNG : FE62MB
        EMMC: SNN : 2849035151 ( 0xA9D0D38F) , MF : 4/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0x3AB400000 [ 14.68 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : B0C0F958103F957C3D6034A1D7044140

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : samsung
Product Model  : SM-A013G
Product Name   : a01corextc
Product Device : a01core
Patch Level    : QP1A.190711.020
Display ID     : QP1A.190711.020.A013GXXS4AUJ1
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-10-01
Build Time     : 07.10.2021
Product Info   : a01core
Product Board  : k39tv1_bsp_1g_titan
Board Platform : mt6739
Product Manfct : samsung

MT6739__samsung__SM-A013G__10__QP1A.190711.020.A013GXXS4AUJ1__QP1A.190711.020__a01core

Read : preloader.bin
Read : efs.img
ExtSparse : Compression ratio : 20%
Read : sec_efs.img
ExtSparse : Compression ratio : 41%
Read : param.img
Read : up_param.img
Read : persist.img
Read : persistent.img
Read : vbmeta_system.img
Read : recovery.img
Read : efuse.img
Read : md1rom.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : steady.img
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 22%
Read : vbmeta.img
Read : prism.img
ExtSparse : Compression ratio : 34%
Read : optics.img
ExtSparse : Compression ratio : 98%
Read : cache.img
Read : omr.img
Read : userdata.img

FW Size  : 2.00 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\samsung mtk\a013g\MT6739__samsung__SM-A013G__10__QP1A.190711.020.A013GXXS4AUJ1__QP1A.190711.020__a01core\

Done!
Elapsed: 00:04:56

Firmware OPPO A16 CPH2269 Scatter File

 NO SS

Product Board  : oppo6765
Board Platform : mt6765
Product Brand  : alps
Product Device : oppo6765
Product Manfct : alps
Product Model  : oppo6765
Product Name   : vnd_oppo6765
MT6765__CPH2269_export_11_A.05_2021082619440000

Bahan :
1. Download ROM Firmware OPPO A16 CPH2269 Scatter File ,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-

Operation : Read Firmware OPPO A16[ v2.31 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 3CF30A121CFEB13A9F2BC90C120158E6
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 554500C92C1B0FC3645968C69F3933B51AD2348B202E5DE3A2B45D16C6D68EF5
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_oppo6765.bin
     EMI : CNT : 0007
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: CID : 150100445836384D42094EC3E48188E7
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 445836384D42
        EMMC: VEN : SAMSUNG : DX68MB
        EMMC: SNN : 1321460865 ( 0x4EC3E481) , MF : 8/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : DCF3112F95349F09541D9CCA49BF1

DA : USB : HIGH-SPEED

Boot done!

Product Board  : oppo6765
Board Platform : mt6765
Product Brand  : alps
Product Device : oppo6765
Product Manfct : alps
Product Model  : oppo6765
Product Name   : vnd_oppo6765


MT6765__CPH2269_export_11_A.05_2021082619440000

Read : preloader.bin
Read : recovery.img
Read : opporeserve1.img
Read : opporeserve2.img
ExtSparse : Compression ratio : 79%
Read : oppo_custom.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 85%
Read : proinfo.img
Read : ocdt.img
Read : cdt_engineering.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : super.img
ExtSparse : Compression ratio : 30%
Read : vbmeta.img
Read : cache.img
Read : userdata.img

FW Size  : 5.94 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\oppo new\oppo a16 cph2269\MT6765__CPH2269_export_11_A.05_2021082619440000\

Done!
Elapsed: 00:15:29