Firmware STRAWBERRY SX ~ SPD SC9832E ~ via CM2 ONLY

NO SS

Patch Level    : OPM2.171019.012
Display ID     : sn15_SX_v07_20181227
Ver. Incmt     : 44415
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 27.12.2018
Product Model  : Strawberry SX
Product Brand  : Strawberry
Product Name   : SX
Product Device : SX
Product Manfct : Strawberry
Product Info   : sp9832e_1h10_go
Product Board  : sp9832e_1h10_32b
Board Platform : sp9832e

Bahan :
1. Download ROM Firmware Flash STRAWBERRY SX

2. File only tested via CM2 SPD v211

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Log FLASH STRAWBERRY SX  VIA INFINITY CM2 V211

 Operation : Flash Firmware [ v2.11 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Skip update! Reason : FWRead has been not complete by user!

UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : sml.bin
CODE  : sml.bin
CODE  : tos.bin
CODE  : tos.bin
CODE  : vbmeta.img
CODE  : vbmeta.img
CODE  : ldsp_l.bin
CODE  : gdsp_l.bin
CODE  : modem_l.bin
CODE  : modem_wcn.img
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : pm_sys.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : persist.img
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
FSIMG  : system.img
FSIMG  : vendor.img
FSIMG  : userdata.img
FSIMG  : cache.img
FSIMG  : prodnv.img
UBOOT  : u-boot-spl.bin
ERASE : FLASH_L
ERASE : MISC
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:03:46

Firmware Strawberry ST388 ~SPD PAC File

Model Name  : ws607_al888_strawberry

Model Brand : STRAWBERRY

Model Device: ws607

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : WS607_TS_AL888_STRAWBERRY_V0.8_20170524

Model Ext   : ST388

Tool :

  1. Download Firmware PAC Strawberry ST388 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Boot volume (+/-)

Cara Flash Strawberry ST-388  via Research Download

Log Read Flash Strawberry ST 388

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : ws607_al888_strawberry
Model Brand : STRAWBERRY
Model Device: ws607
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : WS607_TS_AL888_STRAWBERRY_V0.8_20170524
Model Ext   : ST388

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : feature.img
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1847 MiB
Saved to : E:\STRAWBERRY\st388\SP7731CEB_ws607_6.0_WS607_TS_AL888_STRAWBERRY_V0.8_20170524_ST388\
Done!

syarat-dan-ketentuan