FIX Advan I5C Lite BLANK / LCD Garis2 After Flash

FIX Advan I5C Lite BLANK / LCD Garis2 After Flash

  1.  DOWLOAD FILE FIX Advan I5C Lite BLANK / LCD Garis2 Abis Flash
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms / WA only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

sumber : https://kangsuper.blogspot.com/2020/10/fix-advan-i5c-lite-blank-lcd-garis2.html

 Tinggal Flash pake SPD UPGRADE TOOL

Firmware Nubio Lite N2 LS032I Scatter File

Patch Level    : O11019
Display ID     : LS032I_ZH098_02B_V28_20180831
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 08.10.2018
Product Model  : LS032I
Product Brand  : Nubio_Lite
Product Name   : N2_Lite
Product Device : LS032I
Product Manfct : Fortune Ship
Product Info   : k39tv1_bsp
Product Board  : LS032I
Board Platform : mt6739

Bahan :
1. Download Firmware Nubio Lite N2 LS032I Scatter File

2. Tested Via CM2, SP-Flash-Tool blm test Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 NOTE :

  • CM2 V215 SET 0_BASE 1812

 Log Read Firmware Nubio Lite N2 LS032I Scatter File

Operation : Read Firmware [ v2.15 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM19)
MODE : PRELOADER PORT
PORT : 19
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Zion
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1812 | Manual : Disabled
BROM : SOCID : D8DD431B492A7242379790A5E13ADBB804C668301F3CCBF05592F0CD4593A000
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A484247346132A56200280515C9
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x747C00000 [ 29.12 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 3F8A9C6B4B60B80BFD7BB84DC9615493

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : LS032I_ZH098_02B_V28_20180831
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 08.10.2018
Product Model  : LS032I
Product Brand  : Nubio_Lite
Product Name   : N2_Lite
Product Device : LS032I
Product Manfct : Fortune Ship
Product Info   : k39tv1_bsp
Product Board  : LS032I
Board Platform : mt6739

MT6739__Fortune_Ship__LS032I__8.1.0__LS032I_ZH098_02B_V28_20180831__O11019__k39tv1_bsp

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 61%
Read : system.img
ExtSparse : Compression ratio : 41%
Read : cache.img
Read : userdata.img

FW Size  : 2.07 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\ANDROID LAIN2\nubia\lite\New folder (2)\MT6739__Fortune_Ship__LS032I__8.1.0__LS032I_ZH098_02B_V28_20180831__O11019__k39tv1_bsp\

Done!
Elapsed: 00:05:42

FIRMWARE & FLASH Advan i7U G711A_L68

FRP Advan i7u ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model  : i7U
Product Brand  : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board  : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10

A. BYPASS FRP ONLY ukuran PAC 1 MB

  1. Download Firmware PAC_Advan i7U_BYPASS_FRP_only  atau  Download Disini (1MB)

B. Firmware PAC FULL

  1. Download FULL PAC sp9850ka_1h10_Advan_i7U_SL718A_V1.0_20180508 atau Download disini

Tool :

  1. Download SPD_Upgrade_Tool_R4.0.0001 atau Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

    • Untuk FRP Evercoss Advan i7U tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
    • Boot volume (+/-)

 Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : PAC : sp9850ka_1h10_Advan_i7U_BYPASS_FRP_LOCK.pac
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model  : i7U
Product Brand  : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board  : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10

Done!
Elapsed: 00:06:31

912ac-syarat2bdan2bketentuan

 

Flash & Bypass FRP Evercoss U6 PRIME Firmware PAC

FRP Evercoss U6 PRIME Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

 Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Loading    : sp9850ka_1h10_Evercoss_U6_PRIME_BYPASS_FRP_ONLY.pac

CRVersion  : BP_R1.0.0

PacCPUinfo : sp9850ka_1h10

PacVersion : BYPASS_FRP_ONLY

FastCheck  : 0x0000287889

Bahan :

A. BYPASS FRP ONLY / BYPASS AKUN GOOGLE

  1.     Download Firmware PAC  Evercoss U6 PRIME FRP ONLY   atau  Download Disini (1MB

 

B. Firmware PAC FULL PLUS BYPASS FRP

  1.     Download Firmware PAC Evercoss U6 PRIME FULL plus FRP atau Download Disini

 

C. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini

D. Tutorial Flash via research here

E. Driver SPD by InfinityBox

F. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Boot volume (+)
  • Flash  Evercoss U6 PRIME via research Download, flash aja dgn rom diatas + BYPASS FRP
  • BYPASS FRP Sinyal Aman

Cara Bypass FRP Evercoss U6 PRIME

Log Read Info Firmware Evercoss U6 PRIME

 Loading    : sp9850ka_1h10_Evercoss_U6_PRIME_7.0.015.P1_PLUS_BYPASS_FRP.pac
CRVersion  : BP_R1.0.0
PacCPUinfo : sp9850ka_1h10
PacVersion : 7.0.015.P1_PLUS_BYPASS_FRP
FastCheck  : 0x00CA4F0C7D

Loading files …

File : fdl1-sign.bin
File : fdl2-sign.bin
File : ltenvitem.bin
File : prodnv.img
File : u-boot-spl-16k-sign.bin
File : ltemodem-sign.bin
File : ltedsp-sign.bin
File : ltegdsp-sign.bin
File : pmsys-sign.bin
File : wcnmodem.bin
File : boot-sign.img
File : recovery-sign.img
File : sysinfo.img
File : system.img
File : userdata.img
File : logo.bin
File : fbootlogo.bin
File : cache.img
File : tos-sign.bin
File : sml-sign.bin
File : u-boot-sign.bin
File : persist.img
File : udc.bin
File : sp9850ka_1h10.xml

Load Ok!

912ac-syarat2bdan2bketentuan

Cara Flash AXIOO AX7 S5T via Research Download

Model Name  : Axioo_AX7

Model Brand : Axioo

Model Device: Axioo_AX7

AndrVersion : 6.0

BaseBand CPU: SP9832A_2H11_VOLTE

Project Ver : Axioo_S5T_GSC0_SW20171108

Model Ext   : Axioo_AX7

Tool & Bahan :

  1. Download Firmware PAC Axioo AX7 S5T Tablet atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (+-)

Cara Flash AXIOO AX7 S5T via Research Download

Log Read Firmware Axioo S5T

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX7
Model Brand : Axioo
Model Device: Axioo_AX7
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_S5T_GSC0_SW20171108
Model Ext   : Axioo_AX7

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_600x1024.bin
[Read Ok] : fblogo_600x1024.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2102 MiB
Saved to : D:\axioo\axioo s5t\stock rom axioo s5t\SP9832A_2H11_VOLTE_Axioo_AX7_6.0_Axioo_S5T_GSC0_SW20171108_Axioo_AX7\
Done!

912ac-syarat2bdan2bketentuan

 

Cara Flash IVVI CK3-M1 CK3-01 via Flash Tool

FRP  IVVI CK3-M1 CK3-01 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand     : ivvi

ProdName  : CK3-01

ProdModel : CK3-M1

Device    : CK3-01

AndroidVer: 5.1

MTKxCPU   : MT6735

MTKxPRJ   : ALPS.L1.MP3.V2.95_YL6735.65C.VO.L1_P139

Bahan :

1. Download Firmware IVVI CK3-M1 MT6735

2. Download SP-Flash-Tool Wajib pake versi ini Downloadm Disini

3. Driver bila belum punya instal dulu driver mtknya

4. Untuk tutorial flash via Flash tool bisa dilihat DISINI

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash IVVI CK3-M1 CK3-01 via Flash Tool

Log Read Flash IVVI CK3-M1 CK3-01

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D42315808F107427F0A2BE0
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D4207F108E02B937F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xFCC4CFBD1308FB18B5B54845423DCA1D
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ivvi
ProdName  : CK3-01
ProdModel : CK3-M1
Device    : CK3-01
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2.95_YL6735.65C.VO.L1_P139

[Read Ok] : preloader_ck3_01.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : lk_bak.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / ck3_01 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3160 MiB
Scatter saved to : F:\New folder\MT6735__ivvi__CK3-M1__CK3-01__5.1__ALPS.L1.MP3.V2.95_YL6735.65C.VO.L1_P139\

FRP Wellcome P20pro P10 Verifikasi akun Google

FRP Wellcome P20pro  P10 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand     : WELCOME

ProdName  : P20 Pro

ProdModel : P10

Device    : P20Pro

AndroidVer: 8.1

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2_DROI6580.WEG.L

Bahan :

1. Download Firmware Wellcome P20pro  P10 preloader_f9b1_tc_g4

2. Download Firmware  Firmware Wellcome P20pro  P10 preloader aeon6580_weg_l_l100

3. Download SP-Flash-Tool Wajib pake versi ini Downloadm Disini

4. Driver bila belum punya instal dulu driver mtknya

5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Wellcome P20pro  P10 via Flash Tool

Untitled

Log Read Flash  Wellcome P20pro  P10

Start  at : [8/10/2019 / 12:20:11 PM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42014BFAC2F57251
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42014BFAC2F57251
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD0F067DBCE8A5FE03A02807EB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : WELCOME
ProdName  : P20 Pro
ProdModel : P10
Device    : P20Pro
AndroidVer: 8.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_DROI6580.WEG.L

[Read Ok] : preloader_f9b1_tc_g4.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / f9b1_tc_g4 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1518 MiB
Scatter saved to : F:\New folder (3)\New folder (2)\MT6580__WELCOME__P10__P20Pro__8.1__ALPS.L1.MP6.V2_DROI6580.WEG.L\

All done!

Repair Asus X00TD /ZB601KL Blue Screen / Blank Abis Flash & Downgrade 8.1.0

 

Bahan :

1. Download Firmware ASUS Asus X00TD / ZB601KL WW_ZB601K_247 1KLIK Fastboot Mode atau Download Disini

2.  Download Firmware ASUS Asus X00TD / ZB601KL WW_ZB601K_339 1KLIK Fastboot Mode atau Download Disini

3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara kerja :

1.  Matikan Asus X00TD /ZB601KL

2. Tekan volum up + on sampe muncul fastboot mode

3. Colokan Asus X00TD /ZB601KL ke PC

4. Install driver Download Disini

5. Klik flashall.bat, selanjutnya lihat video

6. Flash done, auto restart, tunggu loading, biasanya lama habis flash

7. Bila tetep stuck, masuk recovery volume down + on, reset factory

8. Done

Note :

– Pake dulu yang Firmware ASUS Asus X00TD / ZB601KL WW_ZB601K_339

Baca Juga :

Video Cara Flash Asus  X00TD /ZB601K 1klik fastboot mode

912ac-syarat2bdan2bketentuan