Flash Axioo Picopad S1 atau 7H GGB

Brand     : Axioo
ProdName  : PICOpad S1
ProdModel : PICOpad S1(7 3G)
Device    : PICOpad S1
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11
Axioo Picopad S1 atau Axioo Picopad 7H GGB
Picopad S1 GGB1 SW

Bahan :

  1.  Download firmware stock rom Axioo Picopad S1 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Axioo 7H yang lain :

  1. BUAT AXIOO PICOpad 7H MT6572 KELINK INI
  2. BUAT AXIOO PICOpad 7H MT6582 KELINK INI

    Flash Axioo Picopad S1 via FlashTool

    About Axioo Picopad S1

    Log Read Firmware Axioo Picopad S1
    Start  at : [5/11/2016 / 11:05:12 PM]
    Operation : Read Flash [ v1.46 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 15010038574D423352011F825A5851F1
    Initialize Memory …
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
    [eMMC] : FLASH_CID : 15010038574D423352011F825A5851F1
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : 6E93FC7CA7700D01582D6E87AD9BF21B
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : Axioo
    ProdName  : PICOpad S1
    ProdModel : PICOpad S1(7 3G)
    Device    : PICOpad S1
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.11

    [Read Ok] : preloader_picopad_s1.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / picopad_s1 / EMMC
    Android Info saved
    HWConfig Info saved
    FW Size : 928 MiB
    Scatter saved to : G:\andro3\axioo\axio 7h s1 GGB1\MT6582__Axioo__PICOpad_S1(7_3G)__PICOpad_S1__4.4.2__ALPS.KK1.MP1.V2.11\

    All done!

    FLASH AXIOO PICOpad 7H MT6582

    AXIOO PICOpad 7H MT6582

    FLASH AXIOO PICOpad 7H BOOTLOOP / DEAD BOOT


      Bahan :

    1. FIRMWARE MTK 6582 DOWNLOAD FIRMWARE AXIOO PICOpad 7H 4.4.2 atau Download Disini
    2. FLASH TOOL DOWNLOAD DISINI
    3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    AXIOO 7H YG LAIN

    1. BUAT AXIOO PICOpad 7H MT6572 KELINK INI
    2. Flash Axioo Picopad S1 atau 7H GGB MT6582

    ABOUT 

    MESINNYA

    LOG READ VIA CM2
     FLASH VIA FLASHTOOL
    Chinese Miracle II  [MTK module] v 1.40


    Start  at : [2/13/2016 / 5:06:06 AM]
    Operation : Read Flash [ v1.40 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6582
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6582_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 15010038574D423352018B84BAE66153
    DA Stat : v4.2 on BBID : 0x87
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
    [eMMC] : FLASH_CID : 15010038574D423352018B84BAE66153
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : Axioo
    ProdName  : PICOpad 7H
    ProdModel : PICOpad 7H(7 3G)
    Device    : picopad_7h
    AndroidVer: 4.4.2 KitKat
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.11

    [Read Ok] : preloader_picopad_7h.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / picopad_7h / EMMC
    FW Size : 934 MiB
    Scatter saved to : G:\andro3\axioo\MT6582__Axioo__PICOpad_7H(7_3G)__picopad_7h__4.4.2_KitKat__ALPS.KK1.MP1.V2.11\

    All done!

    Done!
    Elapsed: 00:04:35
    Reconnect Power/Cable!

    FLASH AXIOO PICOpad 7H BOOTLOOP / DEAD BOOT


    Brand     : AXIOO
    ProdName  : PICOpad 7H
    ProdModel : PICOpad 7H(GGF1)
    Device    : PICOpad 7H
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP7.V1.44

    FLASH AXIOO PICOpad 7H BOOTLOOP / DEAD BOOT

    FIRMWARE BUAT MTK 6572

      Bahan:

    1. FIRMWARE MTK 6572 DOWNLOAD STOCK ROM AXIOO PICOpad 7H 4.4.2 atau Download Disini
    2. FLASH TOOL DOWNLOAD DISINI
    3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k


    Axioo 7H yang lain

    1. BUAT AXIOO PICOpad 7H MT6582 KELINK INI
    2. BUAT Axioo Picopad S1 atau 7H GGB MT6582

    Start  at : [12/25/2015 / 10:19:01 PM]
    Operation : Check / Read Info [ v1.39 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : FE014E4D4D433038473F00400015AFB5
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 00FE , OEM : 014E
    [eMMC] : FLASH_INF : [MICRON] , G80CM
    [eMMC] : FLASH_CID : FE014E4D4D433038473F00400015AFB5
    [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000001D5000000
    [eMMC] : FLASH_UCP : 7504 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand     : AXIOO
    ProdName  : PICOpad 7H
    ProdModel : PICOpad 7H(GGF1)
    Device    : PICOpad 7H
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP7.V1.44

    MODEM :
    BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V72_1_wg_n

    EXTRA :
    LCD [0] : $(ROCO_CUST_LCM)
    LCD Res : $(ROCO_LCM_HEIGHT)x$(ROCO_LCM_WIDTH)
    TOUCH [0] : $(ROCO_TP)
    CAM [0] : $(ROCO_MAIN_CAM)
    CAM [1] : $(ROCO_SUB_CAM)
    MODEM : TS_SIM2_3G_900
    LOCALE : $(ROCO_LANGUAGE)

    Done!
    Elapsed: 00:00:13

    Start  at : [12/25/2015 / 10:58:54 PM]
    Operation : Read Flash [ v1.39 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : FE014E4D4D433038473F00400015AFB5
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 00FE , OEM : 014E
    [eMMC] : FLASH_INF : [MICRON] , G80CM
    [eMMC] : FLASH_CID : FE014E4D4D433038473F00400015AFB5
    [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000001D5000000
    [eMMC] : FLASH_UCP : 7504 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : AXIOO
    ProdName  : PICOpad 7H
    ProdModel : PICOpad 7H(GGF1)
    Device    : PICOpad 7H
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP7.V1.44

    [Read Ok] : preloader_w706.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img

    [ScatCFG] : MT6572 / V1.1.1 / w706 / EMMC
    FW Size : 933 MiB
    Scatter saved to : G:\andro3\axioo\MT6572__AXIOO__PICOpad_7H(GGF1)__PICOpad_7H__4.4.2__ALPS.KK1.MP7.V1.44\

    All done!

    Done!
    Elapsed: 00:05:25