Flash Asus X009DA Dead via 9008 ~ CM2

Device Brand    : asus

Device Manufact.: asus

Device Model    : msm8916_32

Device CPU      : MSM8916

Device IntName  : WW_Phone

Device Version  : 6.0.1

CU_SWVer        : asus_x009da

Device Compile  : 3/29/2017 10:02:02 AM

Fix Asus X009DA matot via 9008, tool wajib pake CM2.

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Asus X009DA HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Flash Asus X009DA via dongle CM2

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 09F6ED7C
ID_BLOCK_L : 4B05FC6FC932A2372DC731FBDB7B5FDD
ID_BLOCK_L : 238EEACE428CCE9EE75A26A3FF8B1F7B
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : asus
ProdName  : WW_Phone
Device    : msm8916_32
AndroidVer: 6.0.1
Manufact. : asus
QLMxCPU   : MSM8916
Asus X009DA
DevInfo : MSM8916__asus__asus__ANDR_v6.0.1__msm8916_32__WW_Phone

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : fs_gc.img
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : asuskey.bin
[Read Ok] : asuskey2.bin
[Read Ok] : asuskey3.bin
[Read Ok] : asuskey4.bin
[Read Ok] : asuskey5.bin
[Read Ok] : asusfw.bin
[Read Ok] : asdf.bin
[Read Ok] : apd.bin
[Read Ok] : adf.bin
[Read Ok] : cache.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2112 MiB

Done!

syarat-dan-ketentuan

Repair Asus Z00UD / ZD551KL Matot 9008

Brand     : asus
ProdName  : WW_Z00T
ProdModel : ASUS_Z00TD
Device    : Z00T
AndroidVer: 5.0.2
Manufact. : asus
QLMxCPU   : MSM8916

DevInfo : MSM8916__asus__asus__ANDR_v5.0.2__ASUS_Z00TD__Z00T__WW_Z00T
Detek di UFI ma CM2 Z00UD = Z00T /Z00TD

Fix Asus Z00UD matot via 9008 bukan Fastboot Mode

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Flash Via UFI Asus Z00UD / ZD551KL HS-9008  atau Download Disini
  2.       Download Rom Flash Via CM2 Asus Z00UD / ZD551KL HS-9008  atau Download Disini
  3.       Tool tested via UFI sama CM2
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Kerja
1. Cara EDL/9008 Silahkan testpoint Asus Z00UD anda, letak test point seperti gambar diatas, baterai tetap dipasang
2. Flash via UFI atau CM2 dongle
3. Buat ROM UFI karena tanpa userdata, bila belum bisa masuk menu silahkan reset abis flash

Penampakan ROM 9008 asus Z00UD

Log Read Firmware ASUS Z00UD via UFI
Scanning for Qualcomm HS-USB QDLoader 9008 device…
Download Port: Qualcomm HS-USB QDLoader 9008 (COM3)
 Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
 USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.2, date: 3-25-2016
Initializing…

platform: msm8916, cpu abi: arm64-v8a
manufacturer: asus
board: msm8916, name: WW_Z00T
brand: asus, model: ASUS_Z00TD
build id: LRX22G, version: 5.0.2 Lollipop (LRX22G.WW_user_1.15.40.1238_20160305)
build description: Z00T-user 5.0.2 LRX22G WW_user_1.15.40.1238_20160305 release-keys

Reading gpt_main0 at 0x00000000-0x000043FF size: 17 KiB…  Done.
Reading sbl1 at 0x00004400-0x001443FF size: 1.25 MiB…  Done.
Reading sbl1bak at 0x00144400-0x002843FF size: 1.25 MiB…  Skipped
Reading rpm at 0x00284400-0x003043FF size: 512 KiB…  Done.
Reading rpmbak at 0x00304400-0x003843FF size: 512 KiB…  Skipped
Reading tz at 0x00384400-0x004043FF size: 512 KiB…  Done.
Reading tzbak at 0x00404400-0x004843FF size: 512 KiB…  Skipped
Reading hyp at 0x00484400-0x005043FF size: 512 KiB…  Done.
Reading hypbak at 0x00504400-0x005843FF size: 512 KiB…  Skipped
Reading DDR at 0x00584400-0x0058C3FF size: 32 KiB…  Done.
Reading ssd at 0x0058C400-0x0058E3FF size: 8 KiB…  Done.
Reading sec at 0x0058E400-0x005923FF size: 16 KiB…  Done.
Reading aboot at 0x00592400-0x00A923FF size: 5 MiB…  Done.
Reading abootbak at 0x01000000-0x014FFFFF size: 5 MiB…  Skipped
Reading splash at 0x01500000-0x019FFFFF size: 5 MiB…  Done.
Reading devinfo at 0x01A00000-0x01AFFFFF size: 1 MiB…  Done.
Reading fsg at 0x02000000-0x0217FFFF size: 1.50 MiB…  Done.
Reading fsc at 0x02180000-0x021803FF size: 1 KiB…  Done.
Reading modemst1 at 0x02180400-0x023003FF size: 1.50 MiB…  Done.
Reading modemst2 at 0x02300400-0x024803FF size: 1.50 MiB…  Done.
Reading factory at 0x02480400-0x02E803FF size: 10 MiB…  Done.
Reading factorybak at 0x02E80400-0x038803FF size: 10 MiB…  Done.
Reading asuskey at 0x03880400-0x039803FF size: 1 MiB…  Done.
Reading asuskey2 at 0x03980400-0x03A803FF size: 1 MiB…  Done.
Reading asuskey3 at 0x03A80400-0x03B803FF size: 1 MiB…  Done.
Reading asuskey4 at 0x03B80400-0x03C803FF size: 1 MiB…  Done.
Reading asuskey5 at 0x03C80400-0x03D803FF size: 1 MiB…  Done.
Reading asusgpt at 0x03D80400-0x03E803FF size: 1 MiB…  Done.
Reading asusgpt1 at 0x03E80400-0x03F803FF size: 1 MiB…  Done.
Reading asusgpt2 at 0x03F80400-0x040803FF size: 1 MiB…  Done.
Reading misc at 0x04080400-0x041803FF size: 1 MiB…  Done.
Reading keystore at 0x04180400-0x042003FF size: 512 KiB…  Done.
Reading config at 0x04200400-0x042083FF size: 32 KiB…  Done.
Reading asdf at 0x04208400-0x062083FF size: 32 MiB…  Done.
Reading abootdebug at 0x06208400-0x064083FF size: 2 MiB…  Done.
Reading persistent at 0x06408400-0x065083FF size: 1 MiB…  Done.
Reading oem at 0x07000000-0x08FFFFFF size: 32 MiB…  Done.
Reading boot at 0x09000000-0x0AFFFFFF size: 32 MiB…  Done.
Reading recovery at 0x0B000000-0x0CFFFFFF size: 32 MiB…  Done.
Reading persist at 0x0D000000-0x0EFFFFFF size: 32 MiB…  Done.
Reading asusfw at 0x0F000000-0x0FFFFFFF size: 16 MiB…  Done.
Reading modem at 0x10000000-0x13FFFFFF size: 64 MiB…  Done.
Reading ADF at 0x14000000-0x15FFFFFF size: 32 MiB…  Done.
Reading APD at 0x16000000-0x22FFFFFF size: 208 MiB…  Done.
Reading cache at 0x23000000-0x24FFFFFF size: 32 MiB…  Done.
Reading system at 0x25000000-0xE4FFFFFF size: 3 GiB…  Done.
Files saved to \\%BACKUPS%\ASUS\ASUS_Z00UD(ZD551KL)\Z00T-user%205.0.2%20LRX22G%20WW_user_1.15.40.1238_20160305%20release-keys\

Log Flash Asus Z00UD mode 9008 via CM2

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0563791F
ID_BLOCK_E : 11112222
ID_BLOCK_L : 9804CD17002B1797819FA1BA47D9326D
ID_BLOCK_L : 58A3C03C622893406757A59F4E44AF42
Pickup loader from firmware package
Loader Sent! Initializing …
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Flash Chain : 48
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : sec.dat
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : splash.img
Flashing : misc.img
Flashing : asdf.bin
Flashing : abootdebug.bin
Flashing : boot.img
Flashing : recovery.img
Flashing : persist.img
Flashing : NON-HLOS.bin
Flashing : cache.img
Flashing : system.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data …

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:04:50

Reconnect Power/Cable!

Bypass Micloud & Flash Redmi 4X ~ DONE tested

 

LETAK TEST POINT REDMI 4X

Lock Micloud Redmi 4X ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : Xiaomi
ProdName  : santoni
ProdModel : Redmi 4X
Device    : santoni
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8937

ROM Redmi 4X Global
Imei & Wifi AMAN

BAHAN :

1. Flash pake ini dulu

2. Rom Full via MIFLASH REDMI 4X santoni_global_images_V8.2.1.0 atau download disini
3. Download Tool dan Driver buat Flash DOWNLOAD DISINI atau Download Disini
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Langkah Kerja :

1. Extrak file dan install tool dan driver (tested on WIN- 32BIT)
2. Konek Test Poin pada Gambar diatas, Letak Titik TP EDL 9008 Redmi anda, kemudian colok kabel usb, terdetek di pc, hs-9008
3. Flash dulu dengan menggunakan Rom no-1  Bypass Only micloud REDMI 4X santoni , Flash cuman 1 menit selesai, cek, apakah masih terkunci micloud atau dah ok, on-kan data sim card

4. Kalau masih locked, flash dulu dengan file ke-2  REDMI 4x santoni_global_images_V8.2.1.0 , hidupkan hp, next2 ampe terkunci lagi, baru flash dengan rom no-1, bypass only
5. cek, done

Simple Cara Bypass Micloud Redmi 4x via Miflash

Cara Flash Redmi 4x sama seperti 4A

Log Read Flash Redmi 4X
Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 435 [MSM8940]
ID_BLOCK_S : 413A60F5
ID_BLOCK_L : 6956B5915B2A9EC1F0845413877787C8
ID_BLOCK_L : 02F2882FEEC9D911CE597A6D0A7CA81D
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB
Boot Ok!

Brand     : Xiaomi
ProdName  : santoni
ProdModel : Redmi 4X
Device    : santoni
AndroidVer: 6.0.1
Manufact. : Xiaomi
QLMxCPU   : MSM8937

DevInfo : MSM8937__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_4X__santoni__santoni

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8937 / eMMC
Firmware Size : 2753 MiB

Done!

 

Flash & Bypass Micloud Redmi 4A ~MUST BE DONE!!!

 LETAK TESTPOINT REDMI 4A

Lock Micloud Redmi 4A ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Brand     : Xiaomi
ProdName  : rolex
ProdModel : Redmi 4A
Device    : rolex
AndroidVer: 7.1.2
Manufact. : Xiaomi
QLMxCPU   : MSM8937

ROM Redmi 4A Global
Imei & Wifi AMAN
BAHAN :

1. Flash pake ini dulu

2. Rom Full via MIFLASH REDMI 4A rolex_global_images_V8.1.4.0 atau download disini
3. Rom Full via MIFLASH REDMI 4A rolex_global_images_V9.6.5.0 atau download disini
4. Download Tool dan Driver buat Flash DOWNLOAD DISINI atau Download Disini
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

NOTE:
1. BYPASS MICLOUD SUPPORT ONLY MIUI 8
2. MIUI 9 silahkan downgrade dg file no2
3. Bila setelah flash miui 8 (file ke-2), malah bootloop atau stuck recovery / adb mode (gambar hp ditancep kabel), maka :

  • Flash Dulu Dgn Fle ke-3 (MIUI 9), 
  • Baru Flash lg dengan File ke-2 (MIUI 8)
  • trus Flash Bypass micloud file ke-1

Langkah Kerja :

1. Extrak file dan install tool dan driver (tested on WIN- 32BIT)
2. Konek Test Poin pada Gambar diatas, Letak Titik TP EDL 9008 Redmi anda, kemudian colok kabel usb, terdetek di pc, hs-9008
3. Flash dulu dengan menggunakan Rom no1  Bypass Only REDMI 4A_MICLOUD_ROLEX , Flash cuman 1 menit selesai, cek, apakah masih terkunci micloud atau dah ok, on-kan data sim card

4. Kalau masih locked, flash dulu dengan file ke-2  REDMI 4A rolex_global_images_V8.1.4.0 , hidupkan hp, next2 ampe terkunci lagi, baru flash dengan rom no1, bypass only
5. cek, done

Simple Cara Bypass Micloud Redmi 4A via Miflash

Cara Flash Redmi 4A

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : DFB3D1D4
ID_BLOCK_L : 4A3794B23A09FFA2D3A53372E654A4AB
ID_BLOCK_L : 7D7BF15067B6508E49D0F1F483FB279A
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G30
Boot Ok!

Brand     : Xiaomi
ProdName  : rolex
ProdModel : Redmi 4A
Device    : rolex
AndroidVer: 7.1.2
Manufact. : Xiaomi
QLMxCPU   : MSM8937

DevInfo : MSM8937__Xiaomi__Xiaomi__ANDR_v7.1.2__Redmi_4A__rolex__rolex

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : lksecapp.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cust.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8917 / eMMC
Firmware Size : 2893 MiB

Done!

Fix Asus X009DA Dead via 9008 ~ CM2

Device Brand    : asus
Device Manufact.: asus
Device Model    : msm8916_32
Device CPU      : MSM8916
Device IntName  : WW_Phone
Device Version  : 6.0.1
CU_SWVer        : asus_x009da
Device Compile  : 3/29/2017 10:02:02 AM

Fix Asus X009DA matot via 9008, tool wajib pake CM2.

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Asus X009DA HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2 
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Flash Asus X009DA via dongle CM2


Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 09F6ED7C
ID_BLOCK_L : 4B05FC6FC932A2372DC731FBDB7B5FDD
ID_BLOCK_L : 238EEACE428CCE9EE75A26A3FF8B1F7B
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : asus
ProdName  : WW_Phone
Device    : msm8916_32
AndroidVer: 6.0.1
Manufact. : asus
QLMxCPU   : MSM8916
Asus X009DA
DevInfo : MSM8916__asus__asus__ANDR_v6.0.1__msm8916_32__WW_Phone

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : fs_gc.img
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : asuskey.bin
[Read Ok] : asuskey2.bin
[Read Ok] : asuskey3.bin
[Read Ok] : asuskey4.bin
[Read Ok] : asuskey5.bin
[Read Ok] : asusfw.bin
[Read Ok] : asdf.bin
[Read Ok] : apd.bin
[Read Ok] : adf.bin
[Read Ok] : cache.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2112 MiB

Done!

Flash Coolpad E560 via Fastboot & HS-9008 (MATOT)

COOLPAD E560
Brand     : Coolpad
ProdName  : cpkmini_g00
ProdModel : Coolpad E560
Device    : cpkmini_g00
AndroidVer: 5.1.1
Manufact. : Coolpad
QLMxCPU   : MSM8916

Bahan :

  • via Fastboot :
  1.      Download Fastboot Rom Coolpad E560  atau Download Disini
  2.      Download Tool dan Driver Coolpad E560 atau Download Disini (PASS YGDP : 369)
  3.      Untuk tutorial flash  bisa dilihat video dibawah
  • via EDL 9008 / CM2
  1.       Download Rom Coolpad E560 HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2 
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl

Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Cara Kerja :

1.    Matikan Coolpad E560 anda
2.    Tekan Volume up terus colok kabel USB, sehingga tampil seperti gambar dibawah

3.    Tekan Tobol Volume Up lagi, dan muncul tulisan seperti gambar dibawah

4.    Install driver dan Tool Coolpad E560 yang ada diatas
5.    Buka YGDP dengan Password 369
6.    Selanjutnya anda bisa lihat video dibawah

Video cara flash Coolpad E560

Log Read Firmware Coolpad E560
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0E813F4C
ID_BLOCK_I : 007050E1
ID_BLOCK_E : 00480000
ID_BLOCK_L : 98598B2F8FB813FB7CAE5AAE6B163EC4
ID_BLOCK_L : FA3D8AA8BB21D8D8AA2C7512E1C79892
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : Coolpad
ProdName  : cpkmini_g00
ProdModel : Coolpad E560
Device    : cpkmini_g00
AndroidVer: 5.1.1
Manufact. : Coolpad
QLMxCPU   : MSM8916

DevInfo : MSM8916__Coolpad__Coolpad__ANDR_v5.1.1__Coolpad_E560__cpkmini_g00__cpkmini_g00

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : param.cfg
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 1349 MiB
Done!

Flash PHICOMM C230 via 9008 & SDCARD

Brand     : PHICOMM
ProdName  : msm8610
ProdModel : PHICOMM CLUE C230
Device    : msm8610
AndroidVer: 4.3
Manufact. : PHICOMM
QLMxCPU   : MSM8610

DevInfo : MSM8610__PHICOMM__PHICOMM__ANDR_v4.3__PHICOMM_CLUE_C230__msm8610__msm8610

Tool Flash wajib mengunakan CM2

Bahan :
1. Download Firmware PHICOMM 230 atau Download Disini
2. Tool wajib Infinity CM2, BOOT VOLUME UP + DOWN
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash PHICOMM C230 via SDCARD
1. Download Update.zip PHICOMM C230 atau Download Disini
2. Masuk recovery, volume (-)
3. Pilih Update from external storage
4. Tunggu sampe done
5. Reset factory
6. Restrart & done

Cara Flash PHICOMM C230 via CM2

Log Read Firmware PHICOMM C230
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 0478EEBF
ID_BLOCK_I : 008110E1
ID_BLOCK_L : C43C56A00F9B80837CD1232CEBB63E0E
ID_BLOCK_L : 5322EC3F30A30B983DF8DD0A189781CA
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Brand     : PHICOMM
ProdName  : msm8610
ProdModel : PHICOMM CLUE C230
Device    : msm8610
AndroidVer: 4.3
Manufact. : PHICOMM
QLMxCPU   : MSM8610

DevInfo : MSM8610__PHICOMM__PHICOMM__ANDR_v4.3__PHICOMM_CLUE_C230__msm8610__msm8610

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : usbdisk.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1991 MiB

Repair Lenovo A2020a40 Blank Putih After Flash

Device Brand    : Lenovo
Device Manufact.: LENOVO
Device Model    : angus3A4
Device CPU      : MSM8909
Device IntName  : angus3A4
Device Version  : 5.1.1
CU_SWVer        : LENOVO
Device Compile  : 9/20/2016 8:31:44 AM
Device ExtInfo  : Lenovo A2020a40

Setelah Flash, lenovo A2020a40 white screen seperti gambar dibawah :

Bahan :
1. Download Firmware Lenovo A2020a40 Buat FIX Blank Putih setelah Flash

2. ONE CLICK FRP LENOVO A2020a40.bat DOWNLOAD DISINI
3. Tool QPST_2.7.422 download disini
4. Tutorial silahkan lihat di video di bawah
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara :
1. Buat FRP Lenovo A2020a40 via Fastboot, untuk selengkapnya silahkan klik disini
2. Download Mode 9008, PENCET VOLUME UP+DOWN, terus colok kabel

Cara Flash Lenovo A2020a40 via QPST

Log Info Lenovo A2020a40 via cm2
Device Brand    : Lenovo
Device Manufact.: LENOVO
Device Model    : angus3A4
Device CPU      : MSM8909
Device IntName  : angus3A4
Device Version  : 5.1.1
CU_SWVer        : LENOVO
Device Compile  : 9/20/2016 8:31:44 AM
Device ExtInfo  : Lenovo A2020a40

Flash Hisense HS-L695 via Mode HS 9008

Hisense HS-L695 PureShot Plus
Brand     : Hisense
ProdName  : L695
ProdModel : HS-L695
Device    : L695
AndroidVer: 5.0.2
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1117.6.04.02.ID00

DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.0.2__HS-L695__L695__L695__L1117.6.04.02.ID00

Tool Flash wajib mengunakan CM2

Bahan :
1. Download Firmware Hisense HS-L695 atau Download Disini
2. Tool wajib Infinity CM2
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Hisense HS-L695 via CM2

Log Read Firmware Hisense HS-L695
Operation : Read Flash [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone…
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 00CE56A1
ID_BLOCK_I : 0091B0E1
ID_BLOCK_L : 26DEB442ED7966615E33DDC20D54DCEC
ID_BLOCK_L : 85F846E9EA75E56E635207FCF6393714
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8929 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : Hisense
ProdName  : L695
ProdModel : HS-L695
Device    : L695
AndroidVer: 5.0.2
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1117.6.04.02.ID00

DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.0.2__HS-L695__L695__L695__L1117.6.04.02.ID00

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : diag.bin
[Read Ok] : lsplash.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8929 / eMMC
Firmware Size : 2584 MiB

Done!

Flash Infinix X553 / HOT 3 LTE via Mode HS 9008

QLMxPRJ   : X553-W82918A1-L-160913V4
DevInfo : MSM89xx__X553-W82918A1-L-160913V4

Note : Hanya buat Infinix X553 16+2 A1

Tool Flash wajib mengunakan CM2 atau Unitool/volcano

Bahan :
1. Download Firmware Infinix X553 16+2 A1 atau Download Disini
2. Tool wajib Infinity CM2 atau Unitool/volcano
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Infinix X553 via CM2

Log Read Firmware Infinix X553
Operation : Read Flash [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 04CDE887
ID_BLOCK_I : 0091B0E1
ID_BLOCK_L : 1CE49E78D743487B2419FBE4237EF6D6
ID_BLOCK_L : 84FF41E8ED74E66F624D06FFF5383615
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8929 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!
QLMxPRJ   : X553-W82918A1-L-160913V4
DevInfo : MSM89xx__X553-W82918A1-L-160913V4

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8929 / eMMC
Firmware Size : 2015 MiB

Done!