Flash & Remove FRP Aldo AS 10

Aldo AS-10 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : ALDO
ProdName  : ALDO
ProdModel : ALDO
Device    : ALDO
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42
ALDO_P0_6_20160218

 Bahan :

  1.  Download Full firmware + FRP Aldo AS10 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Firmware ALDO  AS 10  4.4 KitKat Download disini

Cara Kerja :
Buat remove verifikasi akun google Aldo AS-10 tinggal , hanya centang pada tab FRP saja seperti video dibawah video 1

Cara Flash & remove FRP verifikasi akun google Aldo AS 10 via flash tool
-Only Remove FRPAldo AS 10

-Flash & Remove FRP Aldo AS 10

 Log Read Firmware Aldo As 10
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505072AFA854EC229
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505072AFA854EC229
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : E095483D82CCF4455958850AB9DA6E4F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ALDO
ProdName  : ALDO
ProdModel : ALDO
Device    : ALDO
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42

[Read Ok] : preloader_b905_huaxing.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b905_huaxing / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1381 MiB
Scatter saved to : E:\andro 1\aldo\as10\MT6580__ALDO__ALDO__ALDO__5.1__ALPS.L1.MP6.V2_HEXING6580.WEG.L_P42\

All done!

Flash – Repair Aldo AS 9 Blank After Flash

Aldo AS9
Model Name  : sp7731cea_t13_bp236_64_8_dt
Model Brand : SPRD
Model Device: t13_bp236_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731CEA_T13_ZX_64_8
Project Ver : BP236_ALDO_V2.1_20161011
Model Ext   : ALDO

Kasus awal bootloop, di flash pake pac aldo as9 v1.2 malah jadi blank biru tapi muncul suara, seperti ss dibawah :

NOTE : SILAHKAN CEK FISIK ALDO AS9 DENGAN SS DIBAWAH
Bahan :

1. Download Firmware PAC Aldo AS9 V2.1 Lolipop 5.1 atau Download Disini
 
                     Aldo AS9 V2.1
2. Download Rom Repair Aldo AS 9 V2.1 BLANK Lolypop atau Download Disini
ASLINYA Project Ver : BP236_ALDO_V2.1_20161203
Fisik As 9 atas ma bawah man beda di stricker QC, merah ma biru, tapi apa man itu yg membedakan???
Rom sama dg v2.1 diatas (NO.1) tapi beda UBOOT, BOOT, dan SPL_LOADER

3. Download Firmware PAC Aldo AS9 V1.2 Marshmellow atau Download Disini

               ALDO AS9 V1.2

4. Download Firmware PAC Aldo AS9 V1.0 Marshmallow 6.0 atau Download Disini

                   Aldo AS9 V1.0

4. Download SPD_Upgrade_Tool_R4.0.0001  Download Disini
5. Driver SPD by InfinityBox
6. Tutorial Flash via research here
7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Flash pake SPD_Upgrade_Tool_R4.0.0001
2. Bila tetap blank silahkan buka setting pada tool upgrade tool, pilih pada tab FLASH OPERATIONS, centang Erase All Flash, flash seperti biasa, done
3. Yang gak tahu versi flash system, user data, ma cache aja, coba satu per satu
4. Untuk V2.1 lolypop yg habis flash dengan v2.1 jadi blank / lcd garis-garis muncul suara, silahkan flash dengan Firmware aldo as9 v2.1 yang ke dua, repair blank, coba dulu pake versi lain, bru pake yg repair

Cara Flash Aldo AS 9 via Research Download

Log Read Firmware Aldo AS 9
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : sp7731cea_t13_bp236_64_8_dt
Model Brand : SPRD
Model Device: t13_bp236_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731CEA_T13_ZX_64_8
Project Ver : BP236_ALDO_V2.1_20161011
Model Ext   : ALDO
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 3209 MiB
Saved to : E:\andro 1\aldo\as9\v2.1\SP7731CEA_T13_ZX_64_8_t13_bp236_64_8_5.1_BP236_ALDO_V2.1_20161011_ALDO\
Done!

Firmware PAC Aldo T7Q

Model Name  : sp7731geaplus_k03_yingfu_64_8_dt
Model Brand : ALDO
Model Device: scx35_sp7731gea_k03_yingfu_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_YINGFU_64_8
Project Ver : LMY47D release-keys
Model Ext   : T7Q

Bahan :

1. Download Firmware PAC Aldo T7Q atau Download Disini
2. Download SPD_Upgrade_Tool_R4.0.0001  Download Disini
3. Driver SPD by InfinityBox
4. Tutorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Aldo T7Q via Research Download

Log Read Firmware PAC Aldo T7Q
[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geaplus_k03_yingfu_64_8_dt
Model Brand : ALDO
Model Device: scx35_sp7731gea_k03_yingfu_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_YINGFU_64_8
Project Ver : LMY47D release-keys
Model Ext   : T7Q

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2518 MiB
Saved to : F:\andro3\aldo\t7q\SP7731GEA_K03_YINGFU_64_8_scx35_sp7731gea_k03_yingfu_64_8_5.1_LMY47D_release-keys_T7Q\
Done!

Flash Aldo AS 8 SC7731

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : AS8
Device Model   : scx35_sp7731gea_ts18_kechao_8p8
Device CPU     : sp7731gea
Device IntName : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Device Version : 4.4.2
Device Compile : 9/12/2015 10:44:51 AM
Device Project : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Device ExtInfo : AS8

Mohon diperhatikan : Firmware ini disesuaikan versinya, versi lain dibawah

Bahan :
1. Firmware PAC ALDO_AS8_V07 DOWNLOAD DISINI
2. Firmware PAC ALDO_AS8_V07 New Pack DOWNLOAD DISINI
3. Firmware Infinity CM2 ALDO_AS8_V07 DOWNLOAD DISINI
4. Download Research Download R2.10
5. Driver SPD by InfinityBox
6. Turorial Flash via research here
7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

UNTUK ALDO AS8 VERSI YANG LAIN DOWNLOAD DIBAWAH

  1.  ALDO AS8 V03
  2.  ALDO AS8 V06
  3.  ALDO AS8 V14
  4.  ALDO AS8 V13
  5.  ALDO AS8 V12

NOTE :
-Versi harus sama
-Bila tdk yakin untuk versi yg mana, pada setting research download, anda bisa coba flash tanpa mencentang UBOOT_LOADER dan EraseUBOOT, atau centang saja system,  cache, dan userdata
-Untuk kasus phone lock silahkan centang userdata saja (fdl1&2 wajib centang)

Log Read Firmware Aldo AS8 V.07
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Model Brand : AS8
Model Device: scx35_sp7731gea_ts18_kechao_8p8
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Model Ext   : AS8

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.46_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 979 MiB
Saved to : G:\andro3\aldo\AS8\SP7731GEA_scx35_sp7731gea_ts18_kechao_8p8_4.4.2_7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14_AS8\
Done!

SAMA DENGAN LINK DISINI

FLash Aldo F68

Aldo F68 CPU RDA 8810

Bahan :
1. Firmware Aldo F68 DOWNLOAD HERE 
2. Kalau belum punya fastboot driver dll, Download Here

Pass : http://kangsuper.blogspot.co.id

 Cara Kerja :
1. extact isi zip fasboot bukan folder tapi isinya ke DRIVE C:\ (intinya biar enak aja)
2. masuk fastboot volume up + down on terus colok kabel, seperti gambar dibawah

3. pilih enter fastboot
4. colok ke pc install driver, arahkan ke folder driver tadi yg dicopy ke c:\driver cari dlm folder
5. masuk ms dos promt/command promt
6. copykan system.img dan userdata.img ke C:\
6. ketik fastboot flash system system.img => enter

 7. done

Bila juga mau flash user data juga ketikkan
fastboot flash userdata userdata.img =>enter

About Aldo F68

FLASH ALDO T72 BOOTLOOP / DEADBOOT

Spek:
ANDROID 4.2.2 Jelly Bean, 7″ Multi Touch Screen, , HD, Call, Dual GSM, Processor 1.2GHz, Dual Core, RAM 512 DDR3 SMS, MMS, Wifi support, Bluetooth, 3G, Dual Camera, Storage 4GB Up To 32Gb

bahan :

  1.  Download firmwarenya STOCK ROM ALDO T72
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Firmware Aldo T72 Tested good