Cara Flash AXIOO AX7 S5T via Research Download

Model Name  : Axioo_AX7

Model Brand : Axioo

Model Device: Axioo_AX7

AndrVersion : 6.0

BaseBand CPU: SP9832A_2H11_VOLTE

Project Ver : Axioo_S5T_GSC0_SW20171108

Model Ext   : Axioo_AX7

Tool & Bahan :

  1. Download Firmware PAC Axioo AX7 S5T Tablet atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (+-)

Cara Flash AXIOO AX7 S5T via Research Download

Log Read Firmware Axioo S5T

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX7
Model Brand : Axioo
Model Device: Axioo_AX7
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_S5T_GSC0_SW20171108
Model Ext   : Axioo_AX7

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_600x1024.bin
[Read Ok] : fblogo_600x1024.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2102 MiB
Saved to : D:\axioo\axioo s5t\stock rom axioo s5t\SP9832A_2H11_VOLTE_Axioo_AX7_6.0_Axioo_S5T_GSC0_SW20171108_Axioo_AX7\
Done!

912ac-syarat2bdan2bketentuan

 

Flash & Bypass FRP Axioo Venge AX5 Verifikasi akun Google

FRP Axioo Venge AX5  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : Axioo

ProdName  : VENGE(AX5)

ProdModel : VENGE(AX5)

Device    : VENGE(AX5)

AndroidVer: 5.1

MTKxCPU   : MT6735

MTKxPRJ   : ALPS.L1.MP3.V1_LENTEK6735M.65U.L_P56

Bahan :

  1. Download  Firmware AXIOO VENGE AX5 BYPASS FRP ONLY  atau Download Disini (75KB)
  2. Download  Firmware FULL AXIOO VENGE AX5  + FRP  atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

1. Buat remove / bypass FRP verifikasi akun google  AXIOO VENGE AX5, hanya centang pada tab FRP, lihat video dibawah

2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Flash  AXIOO VENGE AX5 via Flash Tool Bypass FRP only


Log Read Firmware AXIOO VENGE AX5

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 7 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154142313337CC0642D79555D6
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BAB13
[eMMC] : FLASH_CID : 15010052333142414206CC37D655A2D7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBD626C019D3FC9E4896AAAFF4A
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Axioo
ProdName  : VENGE(AX5)
ProdModel : VENGE(AX5)
Device    : VENGE(AX5)
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V1_LENTEK6735M.65U.L_P56

[Read Ok] : preloader_lentek6735m_65u_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / lentek6735m_65u_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2207 MiB
Scatter saved to : D:\axioo\ax5\New folder\MT6735__Axioo__VENGE(AX5)__VENGE(AX5)__5.1__ALPS.L1.MP3.V1_LENTEK6735M.65U.L_P56\

All done!

syarat-dan-ketentuan

 

Firmware & Flash Axioo PICOpad 7H2 / PICOpad_S2L

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

Tool & Bahan :

  1. Download Firmware PAC AXIOO PICOPAD 7H2 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash AXIOO PICOPAD 7H2 via Research Download

Log Read Info AXIOO PICOPAD 7H2
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 5 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:12 

Flash & Bypass FRP Axioo Venge AX5 ROM ORI

FRP Axioo Venge AX5  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : Axioo
ProdName  : VENGE(AX5)
ProdModel : VENGE(AX5)
Device    : VENGE(AX5)
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V1_LENTEK6735M.65U.L_P56

Bahan :

  1. Download  Firmware AXIOO VENGE AX5 BYPASS FRP ONLY  atau Download Disini (75KB)
  2. Download  Firmware FULL AXIOO VENGE AX5  + FRP  atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove / bypass FRP verifikasi akun google  AXIOO VENGE AX5, hanya centang pada tab FRP, lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

 Cara Flash  AXIOO VENGE AX5 via Flash Tool Bypass FRP only

Log Read Firmware AXIOO VENGE AX5
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 7 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154142313337CC0642D79555D6
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BAB13
[eMMC] : FLASH_CID : 15010052333142414206CC37D655A2D7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBD626C019D3FC9E4896AAAFF4A
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Axioo
ProdName  : VENGE(AX5)
ProdModel : VENGE(AX5)
Device    : VENGE(AX5)
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V1_LENTEK6735M.65U.L_P56

[Read Ok] : preloader_lentek6735m_65u_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / lentek6735m_65u_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2207 MiB
Scatter saved to : D:\axioo\ax5\New folder\MT6735__Axioo__VENGE(AX5)__VENGE(AX5)__5.1__ALPS.L1.MP3.V1_LENTEK6735M.65U.L_P56\

All done!

Flash & Firmware Axioo AX4 M5S

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

Bahan :

  1.  Download Firmware PAC REPAC Resign Axioo AX4 M5S ORI atau  Download Disini
  2.  Download Firmware PAC  Axioo AX4 M5S CUSTOM atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Note :
1. Boot volume +/-
2. BYPASS FRP Axioo AX4 M5S via research Download, Pastikan Polytron Axioo AX4 M5S normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang

Cara Flash Axioo AX4 M5S via Research Download

Log Read Firmware Axioo AX4 M5S
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2648 MiB
Saved to : E:\andro 1\axioo\AX4 M5S\SP9832A_2H11_VOLTE_Axioo_AX4_7.0_Axioo_M5S_GDB0_SW20170920_Axioo_AX4\
Done!

Flash Axioo PICOphone M4P+ (M3)

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP8_20151209
Model Ext   : PICOphone_M4P_M3


Bahan :

  1.  Download Firmware PAC Axioo PICOphone M4P+ (M3) atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume UP+DOWN

Cara Flash Axioo PICOphone M4P+ (M3) via Research Download

Log Read Firmware Axioo PICOphone M4P+ (M3)
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP8_20151209
Model Ext   : PICOphone_M4P_M3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1974 MiB
Saved to : D:\axioo\m4p m3\m4p+ m3\SP7731GEA_HDR_PICOphone_M4P_M3_5.1_PICOphone_M4P\
Done!

Firmware AXIOO PICOphone M4P M3 GEP

AXIOO PICOphone M4P M3

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP4_20150917
Model Ext   : PICOphone_M4P_M3

CEK SN dibawah imei seperti gambar diatas lingkaran merah, GEP.
Bahan :
1. Download Firmware PAC AXIOO PICOphone M4P M3 GEP
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Untuk Flash Axioo PICOphone M4P+ (M3) Klik Disini

Cara Flash  AXIOO PICOphone M4P M3 via Research Download

Log Read Firmware Axioo picophone M4P M3
Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_M4P_M3
Model Brand : Axioo
Model Device: PICOphone_M4P_M3
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4P_GEP4_20150917
Model Ext   : PICOphone_M4P_M3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-bootspl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1974 MiB
Saved to : F:\AXIOO\AXIO M4P M3\SP7731GEA_HDR_PICOphone_M4P_M3_5.1_PICOphone_M4P_GEP4_20150917_PICOphone_M4P_M3\
Done!

Elapsed: 00:10:13