Flash & Firmware Bellphone BP 268

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

Bahan :

1. Download Firmware Full

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

  • Bellphone BP268 MTK versi Lain Download Di bawah
  1. MT6580__alps__BP268__er241c_m05_20170829_2017
  2.  

Cara Flash Bellphone BP628 via Flash Tool

Log Read Firmware BellPhone BP268
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473C346F0EC15151
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473C346F0EC15151
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD7AD1AE2CE3514D83B7F3DA9F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1382 MiB
Scatter saved to : D:\ANDROID LAIN2\Bellphone\BP268\MT6580__alps__BP268__keytak6580_weg_l__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24\

All done!

Cara Bypass Akun Google ( FRP ) & Flash Haier G51

FRP Haier G51  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand     : Haier
ProdName  : G51
ProdModel : HM-G553-FL
Device    : HM-G553-FL
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_len6737m.35g.n_P192

Bentukan : G51-H05 S013-ID

Bahan :
1. Download Bypass FRP Only

2. Download Firmware Full

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini
4. Driver bila belum punya instal dulu driver mtknya
5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Bypass Frp Haier G51 via Flash Tool

 Log Read Firmware Haier G51
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001153030574E6ABC0B4D0935D4D8
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , M00WN
[eMMC] : FLASH_CID : 150100514E5730304D0BBC6AD8D48409
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDF3B0BB28BD10F3E1E3C8300E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Haier
ProdName  : G51
ProdModel : HM-G553-FL
Device    : HM-G553-FL
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_len6737m.35g.n_P192

[Read Ok] : preloader_len6737m_35g_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / len6737m_35g_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2894 MiB
Scatter saved to : F:\haier\G51\MT6737M__Haier__HM-G553-FL__HM-G553-FL__7.0__alps-mp-n0.mp1-V1.0.2_len6737m.35g.n_P192\

All done!

Flash Bellphone BP99

Brand     : alps
ProdName  : BP99
ProdModel : BP99
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : MP.V1.0

CEK : FISIK HARUS SEPERTI SEPERTI GAMBAR YANG KAMI UPLOAD
Bahan :

 1. Download Firmware Bellphone BP99

     Bellphone BP99 V1.4 seperti gambar dibawah SIMCARD BESAR SEMUA 

     

     Bellphone BP99 V1.5 seperti gambar dibawah SIM BESAR & KECIL


    2.  Download Flash Tool DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.   Untuk tutorial flash via Flash tool bisa dilihat DISINI 
     Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Note :
    -Bila telah diflash dan bellphone BP99 muncul eror 4032 (selain emmc), silahkan flash menggunakan versi 1.4 dulu kemudian v1.5, gunakan firmware upgrade saja.
    -BP99 V1.5 diflash pake Rom V1.4 TS tidak jalan, layar terpotong bagian bawah

     Flash Bellphone BP99 via Flash Tool

    Log Read Firmware Bellphone BP99
    Operation : Read Flash [ v1.58 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with PRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : 009800BC009000660076001500010000
    eMMC Flash : NOT INSTALLED
    Initialize Memory …
    DRAM already initialized by Preloader
    DAgent sent , init HW now
    NAND FlashIC initialized
    [NAND] : FLASH_VEN : 0x0097 , NAND_UNKNOWN
    [NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0015 0001
    [NAND] : FLASH_LEN : 0x20000000
    [NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
    DEV RID    : 0xA93155677EBA52D5CA41FFA808FA0825
    INT RAM    : 0x00020000
    EXT RAM    : 0x10000000 [256 MiB]
    BOOT TYPE  : NAND_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    Reading Flash Content now …
    [Read Ok] : preloader_s3017_72_nand_bp200_samsung_bellphone_4
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : usrdata.img
    [ScatCFG] : MT6572 / V1.1.1 / s3017_72_nand_bp200_samsung_bellpho / NAND
    FW Size : 241 MiB

    Brand     : alps
    ProdName  : BP99
    ProdModel : BP99
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : MP.V1.0
    Android Info saved
    Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572_NAND_alps__BP99___4.4.2__MP.V1.0

    Done!