Flash & Firmware Axioo AX4 M5S

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

Bahan :

  1.  Download Firmware PAC REPAC Resign Axioo AX4 M5S ORI atau  Download Disini
  2.  Download Firmware PAC  Axioo AX4 M5S CUSTOM atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Note :
1. Boot volume +/-
2. BYPASS FRP Axioo AX4 M5S via research Download, Pastikan Polytron Axioo AX4 M5S normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang

Cara Flash Axioo AX4 M5S via Research Download

Log Read Firmware Axioo AX4 M5S
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2648 MiB
Saved to : E:\andro 1\axioo\AX4 M5S\SP9832A_2H11_VOLTE_Axioo_AX4_7.0_Axioo_M5S_GDB0_SW20170920_Axioo_AX4\
Done!

BYPASS FRP & FLASH HM M3

FRP HM M3 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya, thx

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3

 Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

Bahan :

A. BYPASS FRP ONLY ukuran PAC 1 MB

B. ROM PAC FULL HM M3

     TOOL :

    1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    2.  Driver SPD by InfinityBox
    3.  Tutorial Flash via research here
    4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Kerja :

    • Untuk FRP HM M3 tinggal pake PAC BYPASS FRP ONLY
    • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
    • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
    • Boot volume (+)

    Cara Bypass FRP HM M3 via Research Download

    Cara Flash HM M3 via Research Download

    Log Read Firmware HM M3
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731c_1h10_oversea
    Model Brand : HM
    Model Device: sp7731c_1h10
    AndrVersion : 6.0
    BaseBand CPU: SP7731CEA
    Project Ver : MRA58K release-keys
    Model Ext   : M3
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_720x1280.bin
    [Read Ok] : logo2.bin
    [Read Ok] : logo3.bin
    [Read Ok] : logo4.bin
    [Read Ok] : logo5.bin
    [Read Ok] : logo6.bin
    [Read Ok] : logo7.bin
    [Read Ok] : logo8.bin
    [Read Ok] : logo9.bin
    [Read Ok] : logo10.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : sysinfo.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1707 MiB
    Saved to : E:\hm\m3\New folder\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M3\
    Done!

    Flash & Firmware Nexcom Mega

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    Bahan :

    1.  Download Firmware PAC Nexom Mega atau  Download Disini
    2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    3.  Driver SPD by InfinityBox
    4.  Tutorial Flash via research here
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Note :
    1. Boot volume (-)

    Cara Flash Nexcom Mega via Research Download

    Log Read Firmware Nexcom Mega
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc8830_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_800x1280.bin
    [Read Ok] : fblogo_800x1280.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1044 MiB
    Saved to : F:\Nexcom Mega\SP5735C2EA_scx35_sp5735c2ea_4.4.2_NC_Mega_20160920_Mega\
    Done!

    Flash Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2407_V5.2.10_20161223
    Model Ext   : POLYTRON R2407

    Bahan :

    1.  Download Firmware PAC Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT atau  Download Disini
    2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    3.  Driver SPD by InfinityBox
    4.  Tutorial Flash via research here
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Firmware Polytron R2407 versi lainnya :

     Error pada research download baca disini

    Note :
    1. Boot volume +/-
    2. BYPASS FRP Polytron R2407 via research Download, Pastikan Polytron R2407 normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang

    Cara Flash Polytron R2407 via Research Download

    Log Read Firmware Polytron R2407 white gold zt
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2407_V5.2.10_20161223
    Model Ext   : POLYTRON R2407

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    Skip [NID] : WFIXNV1
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    Skip [NID] : WCNFIXNV1
    [Read Ok] : logo_480x800.bin
    [Read Ok] : fblogo_480x800.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : fbootlogo3.bin
    [Read Ok] : fbootlogo4.img
    [Read Ok] : fbootlogo5.bin
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 2235 MiB
    Saved to : E:\andro 1\polytron\r2407\r2407 white gold zt\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2407_V5.2.10_20161223_POLYTRON_R2407\
    Done!