FIX Advan I5C Lite BLANK / LCD Garis2 After Flash

FIX Advan I5C Lite BLANK / LCD Garis2 After Flash

  1.  DOWLOAD FILE FIX Advan I5C Lite BLANK / LCD Garis2 Abis Flash
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms / WA only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

sumber : https://kangsuper.blogspot.com/2020/10/fix-advan-i5c-lite-blank-lcd-garis2.html

 Tinggal Flash pake SPD UPGRADE TOOL

Repair Asus X00TD /ZB601KL Blue Screen / Blank Abis Flash & Downgrade 8.1.0

 

Bahan :

1. Download Firmware ASUS Asus X00TD / ZB601KL WW_ZB601K_247 1KLIK Fastboot Mode atau Download Disini

2.  Download Firmware ASUS Asus X00TD / ZB601KL WW_ZB601K_339 1KLIK Fastboot Mode atau Download Disini

3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara kerja :

1.  Matikan Asus X00TD /ZB601KL

2. Tekan volum up + on sampe muncul fastboot mode

3. Colokan Asus X00TD /ZB601KL ke PC

4. Install driver Download Disini

5. Klik flashall.bat, selanjutnya lihat video

6. Flash done, auto restart, tunggu loading, biasanya lama habis flash

7. Bila tetep stuck, masuk recovery volume down + on, reset factory

8. Done

Note :

– Pake dulu yang Firmware ASUS Asus X00TD / ZB601KL WW_ZB601K_339

Baca Juga :

Video Cara Flash Asus  X00TD /ZB601K 1klik fastboot mode

912ac-syarat2bdan2bketentuan

 

Bypass FRP Advan E1C 3G & Flash E1C 3G V16 EMMC

FRP Advan E1C 3G  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Brand     : ADVAN
ProdName  : E1C_3G
ProdModel : E1C_3G
Device    : ADVAN_E1C_3G
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.52_miki8321.tb.m_P1

Bahan :
1. Download Rom

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Advan E1C 3G via Flash Tool

 Log Read Flash Advan E1C 3G
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 17 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E58324D42016C2EEEFB2453
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D42016C2EEEFB2453
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD7669B42AFB08AE77DFDA79DB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ADVAN
ProdName  : E1C_3G
ProdModel : E1C_3G
Device    : ADVAN_E1C_3G
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.52_miki8321.tb.m_P1

[Read Ok] : preloader_advan8321_9719e.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / advan8321_9719e / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2255 MiB
Scatter saved to : E:\ADVAN\ADVAN E1C 3G\v16 emmc ok\New folder\MT6580__ADVAN__E1C_3G__ADVAN_E1C_3G__6.0__alps-mp-m0.mp1-V2.52_miki8321.tb.m_P1\

All done!

Firmware Luna G55 elevate V024

Firmware Luna G55 versi V024

Brand     : LUNA
ProdName  : ELEVATE
ProdModel : G55
Device    : G55
AndroidVer: 6.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-m0.mp7-V2.3.1_6755.66.sz.m_P4

Bahan :
1.Download  Firmware Luna G55 V024 atau Download Disini
2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log Read Firmaware Luna G55
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 7 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GB
[eMMC] : FLASH_CID : 90014A484247346132A5196B8D32140F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xFCC4CFBD853B33FFE186E8C5FF24EC6F
INT RAM    : 0x00000000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : LUNA
ProdName  : ELEVATE
ProdModel : G55
Device    : G55
AndroidVer: 6.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-m0.mp7-V2.3.1_6755.66.sz.m_P4

[Read Ok] : preloader_wt6755_66_sz_m.bin
[Read Ok] : recovery.img
[Read Ok] : custom.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6755 / V1.1.2 / wt6755_66_sz_m / EMMC
Android Info saved
HWConfig Info saved
FW Size : 4660 MiB
Scatter saved to : F:\luna\MT6755__LUNA__G55__G55__6.0__alps-mp-m0.mp7-V2.3.1_6755.66.sz.m_P4\

All done!

Flash & Bypass FRP Himax Y13 ~ L112 & L124

FRP Himax Y13  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Brand     : Himax
ProdName  : Y13
ProdModel : Y13
Device    : E3658
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : E3658_DE36581_HIMAX-Y13_L124

Bahan :
1. Download Rom

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Himax Y13 via Flash Tool

Log Read Firmware Himax Y13
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 25 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D420008569A5C93FF
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D420008569A5C93FF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD14A4B4D14E0B3767D11EF924
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : Himax
ProdName  : Y13
ProdModel : Y13
Device    : E3658
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : E3658_DE36581_HIMAX-Y13_L124

[Read Ok] : preloader_e3658.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / e3658 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2105 MiB
Scatter saved to : D:\himax\y13\MT6580__Himax__Y13__E3658__6.0__E3658_DE36581_HIMAX-Y13_L124\

All done!

Flash & Fix Blank Polytron R2403 VIOLET

Device Brand   : Spreadtrum
Device Model   : P1923
Device CPU     : P1923
Device IntName : P1923_PT
Device Version : 4.4.2
Device Compile : 9/18/2015 10:50:52 AM
Device Project : POLYTRON_R2403_1300_V1.1.3_20150918
Device ExtInfo : POLYTRON_R2403

Bahan :

  1.  Download Firmware PAC POLYTRON_R2403_1300_V1.1.3 atau  Download Disini
  2.  Download Firmware PAC POLYTRON_R2403_1300_V1.0.8 atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Note :
1. Boot volume +/-

 Cara Flash Polytron R2403 via Research Download

Log Read Firmware Polytron R2403
Operation : Read FullFlash [ v1.19 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : P1923_PT
Model Brand : Spreadtrum
Model Device: P1923
AndrVersion : 4.4.2
BaseBand CPU: P1923
Project Ver : POLYTRON_R2403_1300_V1.1.3_20150918
Model Ext   : POLYTRON_R2403

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 838 MiB
Saved to : G:\andro3\POLYTRON\r2403\P1923_P1923_4.4.2_POLYTRON_R2403_1300_V1.1.3_20150918_POLYTRON_R2403\
Done!

Flash & Firmware Axioo AX4 M5S

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

Bahan :

  1.  Download Firmware PAC REPAC Resign Axioo AX4 M5S ORI atau  Download Disini
  2.  Download Firmware PAC  Axioo AX4 M5S CUSTOM atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Note :
1. Boot volume +/-
2. BYPASS FRP Axioo AX4 M5S via research Download, Pastikan Polytron Axioo AX4 M5S normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang

Cara Flash Axioo AX4 M5S via Research Download

Log Read Firmware Axioo AX4 M5S
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2648 MiB
Saved to : E:\andro 1\axioo\AX4 M5S\SP9832A_2H11_VOLTE_Axioo_AX4_7.0_Axioo_M5S_GDB0_SW20170920_Axioo_AX4\
Done!

Flash Lava Iris 505 & Fix Blue Screen + FRP

FRP Lava Iris 505  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx
Brand     : LAVA
ProdName  : iris 505
ProdModel : iris 505
Device    : lava72_sp49th
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V1_LAVA6572.WE.L_P36

Flashing Lava Iris 505 salah versi mengakibatkan blue screen, abis flashing cuman tampil dilayar warna biru gelap, silahkan flash dengan rom yg cocok.
Bahan :

1. Download  Firmware FULL Lava Iris 505 + FRP Lolypop atau Download Disini
2. Download Versi Lain  Firmware Lava Iris 505 Kitkat

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini
4. Driver bila belum punya instal dulu driver mtknya
5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google Lava Iris 505, hanya centang pada tab FRP, silahkan lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Flash Lava Iris 505

Log Read Firmware Lava Iris 505
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 6 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505071E95B509A3C7
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505071E95B509A3C7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD403AA25A6C86579CA3291780
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : LAVA
ProdName  : iris 505
ProdModel : iris 505
Device    : lava72_sp49th
AndroidVer: 5.1
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.L1.MP6.V1_LAVA6572.WE.L_P36

[Read Ok] : preloader_lava72_sp49th.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / lava72_sp49th / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1506 MiB
Scatter saved to : D:\lava\lava 505\New folder (2)\MT6572__LAVA__iris_505__lava72_sp49th__5.1__ALPS.L1.MP6.V1_LAVA6572.WE.L_P36\

All done!

Done!

BYPASS FRP & FLASH HM M3

FRP HM M3 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya, thx

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3

 Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

Bahan :

A. BYPASS FRP ONLY ukuran PAC 1 MB

B. ROM PAC FULL HM M3

     TOOL :

    1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    2.  Driver SPD by InfinityBox
    3.  Tutorial Flash via research here
    4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Kerja :

    • Untuk FRP HM M3 tinggal pake PAC BYPASS FRP ONLY
    • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
    • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
    • Boot volume (+)

    Cara Bypass FRP HM M3 via Research Download

    Cara Flash HM M3 via Research Download

    Log Read Firmware HM M3
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731c_1h10_oversea
    Model Brand : HM
    Model Device: sp7731c_1h10
    AndrVersion : 6.0
    BaseBand CPU: SP7731CEA
    Project Ver : MRA58K release-keys
    Model Ext   : M3
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_720x1280.bin
    [Read Ok] : logo2.bin
    [Read Ok] : logo3.bin
    [Read Ok] : logo4.bin
    [Read Ok] : logo5.bin
    [Read Ok] : logo6.bin
    [Read Ok] : logo7.bin
    [Read Ok] : logo8.bin
    [Read Ok] : logo9.bin
    [Read Ok] : logo10.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : sysinfo.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1707 MiB
    Saved to : E:\hm\m3\New folder\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M3\
    Done!

    Flash & Firmware Nexcom Mega

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    Bahan :

    1.  Download Firmware PAC Nexom Mega atau  Download Disini
    2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    3.  Driver SPD by InfinityBox
    4.  Tutorial Flash via research here
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Note :
    1. Boot volume (-)

    Cara Flash Nexcom Mega via Research Download

    Log Read Firmware Nexcom Mega
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc8830_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_800x1280.bin
    [Read Ok] : fblogo_800x1280.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1044 MiB
    Saved to : F:\Nexcom Mega\SP5735C2EA_scx35_sp5735c2ea_4.4.2_NC_Mega_20160920_Mega\
    Done!