Firmware Maimeite NOTE30 PLUS | NOTE 30 +

18 Mei 202119 Juni 2021 godsaveusnow Clone, FIRMWARE boot loop, FILE, FIRMWARE, FLASH, lock, logo, MAIMEITE, NOTE 30, NOTE 30 PLUS, PLUS, rom

  Brand     : alps
ProdName : x6_v5_x50
ProdModel : Note30 Plus
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106_M501-Note30_Plus

Bahan :
1. Download ROM Firmware Wearnes ZeusPhone ZP-452 Scatter File

MT6572__alps__Note30_Plus__x6_v5_x50__4.4.2__HY_W106_M501-Note30_Plus

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log read firmware Maimeite NOTE30 PLUSOperation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D42036AD8D0CC31BF
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42036AD8D0CC31BF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBDA33A00652756689ED5478A53
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName : x6_v5_x50
ProdModel : Note30 Plus
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106_M501-Note30_Plus

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : D:\ANDROID LAIN2\MAIMEITE\NOTE30 Plus\New folder\MT6572__alps__Note30_Plus__x6_v5_x50__4.4.2__HY_W106_M501-Note30_Plus\

All done!

Firmware & Flash Wearnes ZeusPhone ZP-541

3 Mei 20213 Mei 2021 godsaveusnow Tak Berkategori boot loop, FILE, FIRMWARE, FLASH, lock, logo, om, wearnes, zp-541, zp541

Brand     : Wearnes
ProdName : ZeusPhone ZP-541
ProdModel : ZeusPhone ZP-541
Device    : ZeusPhone ZP-541
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ZP-541_1.0_4.4.2_20150602

Bahan :
1. Download ROM Firmware Wearnes ZeusPhone ZP-541 Scatter File

Download Rom MT6582__Wearnes__ZeusPhone_ZP-541__ZeusPhone_ZP-541__4.4.2__ZP-541_1.0_4.4.2_20150602

Log read firmware Wearnes ZeusPhone ZP-541

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 89 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A48384731650507AB72E85F324B
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A48384731650507AB72E85F324B
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDF9A94BB2C05113A7D812DBE4
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Wearnes
ProdName : ZeusPhone ZP-541
ProdModel : ZeusPhone ZP-541
Device    : ZeusPhone ZP-541
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ZP-541_1.0_4.4.2_20150602

[Read Ok] : preloader_hexing82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hexing82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 955 MiB
Scatter saved to : D:\ANDROID LAIN2\Wearnes\ZeusPhone ZP-541\MT6582__Wearnes__ZeusPhone_ZP-541__ZeusPhone_ZP-541__4.4.2__ZP-541_1.0_4.4.2_20150602\

All done!

Firmware Huawei Nova 7 PRO | COPY/CLONE l MT6580alpsnova_7_Pro__nova_7_Pro__5.1

23 Desember 2020 godsaveusnow Clone, FIRMWARE, FLASH, rom boot loop, FILE, FIRMWARE, FLASH, HUAWEI, lock, logo, note, nova 7, nova 7 pro, rom

Brand     : alps
ProdName : nova_7_Pro
ProdModel : nova 7 Pro
Device    : nova_7_Pro
AndroidVer: 5.1
CU_SWVer : V1.1.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

V207IF3_HDPLUS1600_L_V1.0_1_8_20201021_2131_V1.1.0_B125_CX_K25P_WELCOME_NOVA_7PRO

Bahan :
1. Download ROM Firmware CLONE Huawei Nova 7 PRO Scatter File

Download Rom MT6580__alps__nova_7_Pro__nova_7_Pro__5.1__ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

Log read info Firmware Flash CLONE Huawei Nova 7 PRO | COPY/CLONE

Operation : Check / Read Info [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100463732324D420037EC544E92FB
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM227
[eMMC] : FLASH_CID : 150100463732324D420037EC544E92FB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBDE0555BEBA95AE75A390D0B49
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps
ProdName : nova_7_Pro
ProdModel : nova 7 Pro
Device    : nova_7_Pro
AndroidVer: 5.1
CU_SWVer : V1.1.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2.19_HCT6580.WEG.A.L_P55

SECURITY :
IMEI_SW [1] : 35767
IMEI_SW [2] : 35767
BTMAC Addr : 123456789C48
WiFi MAC    : 20720D390371

MODEM :
BaseBand : MT6580_S00_MOLY_WR8_W1449_MD_WG_MP_V23_P8_1_wg_n

EXTRA :
LCD : Not info available 😦
LCD Res : M_HEIGHT=1600xM_WIDTH=720
TOUCH [0] : STOM_KERNEL_TOUCHPANEL=gsl915
CAM [0] : STOM_HAL_IMGSENSOR=imx190s_mipi_raw
CAM [1] : gc2355s_mipi_raw
CAM [2] : ov9762_mipi_raw
CAM [3] : ov9760_mipi_raw
CAM [4] : imx190_mipi_raw
CAM [5] : ov5648_mipi_raw
CAM [6] : ov9760m_mipi_raw
CAM [7] : ov9762m_mipi_raw
CAM [8] : gc2385mipi_raw
CAM [9] : ov8865_mipi_raw
MODEM : STOM_MODEM=hct6580_we_a_l_hspa_b1b2b4b5b8_coclk_RTM7289-5_2sim_hotplug_v199F
LOCALE : K_PRODUCT_LOCALES=en_US es_ES ar_EG fa_IR pt_BR pt_PT fr_FR ru_RU tr_TR el_GR vi_VN my_ZG es_US tl_PH th_TH de_DE de_AT in_ID ms_MY zh_CN it_IT it_CH km_KH hi_IN bn_BD pl_PL

Done!
Elapsed: 00:00:19

FLASH & Firmware RINO 3 | RINO 3 PRO | MTK6763 FAKE | MT6572 SCATER FILE

20 November 202013 Maret 2021 godsaveusnow Clone, RINO boot loop, FILE, FIRMWARE, lock, logo, RINO, RINO 3, RINO 3 PRO, rom

platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: x6_v5_x50, name: x6_v5_x50
brand: alps, model: rino3 pro()
build id: KOT49H, version: 4.4.2 Lollipop (HY_W116_M403_Z)
build description: x6_v5_x50-user 4.4.2 KOT49H eng.jjx.1594700373 test-keys
build version: HY_W116_M403_Z
lcd: st7701s_fwvga_dsi_vdo_w101v30 st7701_fwvga_dsi_vdo_cmi5012
screen resolution: 960 x 480
main camera: ov3660_yuv_w116_w7
lens: sensordrive
front camera: ov3660sub_yuv_w116_w7
audio: amp_6323pmic_spk
touch: ft5206_qhd_notouch
modem: mbk72_wet_jb3_hspa_850

RINO 3 FILE SAMA RINO 3 PRO

FLASH SYSTEM,USERDATA,CACHE DULU SAJA

Bahan :
1. Download ROM RINO 3 PRO Scatter File, Silahkan coba yg paling cocok untuk RINO anda

NOTE :

Untuk file rino ke2, install back button

NOTE :

1. BACKUP

2. COBA FLASH SYSTEM,USERDATA,CACHE DULU SAJA

KLO GAK BISA BARU FLASH FULL

Log Read Firmware RINO 3 PRO via UFI

Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM…
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)… Done.
Detected PreLoader USB VCOM Port (COM5)
Connection status: EHCI:HUB:HUB:USB 2.0 Low-Speed
USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom… Done.
Sending Download Agent… Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0xFF, BL ver: 0x01
Secure config: 0x00
SRAM size: 128 KiB
DRAM size: 512 MiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: SJS00M (0x534a5330304d), rev: 0x00, serial number: 0x77EF708C
Manufacturing date: Jun 2012
CID: 15010053 4A533030 4D0077EF 708C6FE1
Capacity: 3.64 GiB(3,911,319,552 bytes)
Boot1: 1024 KiB
Boot2: 1024 KiB
RPMB: 128 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: x6_v5_x50, name: x6_v5_x50
brand: alps, model: rino3 pro()
build id: KOT49H, version: 4.4.2 Lollipop (HY_W116_M403_Z)
build description: x6_v5_x50-user 4.4.2 KOT49H eng.jjx.1594700373 test-keys
build version: HY_W116_M403_Z
lcd: st7701s_fwvga_dsi_vdo_w101v30 st7701_fwvga_dsi_vdo_cmi5012
screen resolution: 960 x 480
main camera: ov3660_yuv_w116_w7
lens: sensordrive
front camera: ov3660sub_yuv_w116_w7
audio: amp_6323pmic_spk
touch: ft5206_qhd_notouch
modem: mbk72_wet_jb3_hspa_850
Model: Oppo AX7 Pro
AUTH info: MTK, version: 1
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM…
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
Hold the VOL UP to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)… Done.
Detected PreLoader USB VCOM Port (COM5)
Connection status: EHCI:HUB:HUB:USB 2.0 Low-Speed
USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom… Done.
Sending Download Agent… Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0xFF, BL ver: 0x01
Secure config: 0x00
SRAM size: 128 KiB
DRAM size: 512 MiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: SJS00M (0x534a5330304d), rev: 0x00, serial number: 0x77EF708C
Manufacturing date: Jun 2012
CID: 15010053 4A533030 4D0077EF 708C6FE1
Capacity: 3.64 GiB(3,911,319,552 bytes)
Boot1: 1024 KiB
Boot2: 1024 KiB
RPMB: 128 KiB
User area: 3.64 GiB(3,909,091,328 bytes)
USB speed: High-Speed
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: x6_v5_x50, name: x6_v5_x50
brand: alps, model: rino3 pro()
build id: KOT49H, version: 4.4.2 Lollipop (HY_W116_M403_Z)
build description: x6_v5_x50-user 4.4.2 KOT49H eng.jjx.1594700373 test-keys
build version: HY_W116_M403_Z
lcd: st7701s_fwvga_dsi_vdo_w101v30 st7701_fwvga_dsi_vdo_cmi5012
screen resolution: 960 x 480
main camera: ov3660_yuv_w116_w7
lens: sensordrive
front camera: ov3660sub_yuv_w116_w7
audio: amp_6323pmic_spk
touch: ft5206_qhd_notouch
modem: mbk72_wet_jb3_hspa_850
Reading preloader_x6_v5_x50.bin… Done.
Reading mbr… Done.
Reading ebr1… Done.
Reading pro_info… Done.
Reading nvram… Done.
Reading protect_f… Done.
Reading protect_s… Done.
Reading seccfg… Done.
Reading uboot.bin… Done.
Reading bootimg.img… Done.
Reading recovery.img… Done.
Reading sec_ro.img… Done.
Reading misc… Done.
Reading logo.bin… Done.
Reading expdb… Done.
Reading android.img… Done.
Reading cache.img… Done.
Reading usrdata.img… Done.
Reading fat.img… Done.
Files saved to \\D:\New%20folder\New%20folder%20(3)\
Completed in 12 mins 5.813 s

Firmware Novo BONVI Prime scatter

31 Oktober 202031 Oktober 2020 godsaveusnow novo bonvi, boot loop, FIRMWARE, logo, novo, PRIME, rom, TESTED

Brand     : novo
ProdName : t596_novo_37m35
ProdModel : Bonvi Prime
Device    : t596_novo_37m35
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : Bonvi-Prime.v06.mt6737m.35.n

Bahan :
1. Download Firmware Novo BONVI Prime scatter file

Download Rom Firmware Novo BONVI Prime scatter file atau download disini

2. SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log Read Firmware NOVO BONVI PRIME

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065314738246107056579E5DD
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505076124DDE55265
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xA93155676865DD472C40E0DF478D3324
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : novo
ProdName : t596_novo_37m35
ProdModel : Bonvi Prime
Device    : t596_novo_37m35
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : Bonvi-Prime.v06.mt6737m.35.n

[Read Ok] : preloader_t596_tg_q19_n_novo_37m35.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / t596_tg_q19_n_novo_37m35 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3100 MiB
Scatter saved to : D:\New folder (2)\MT6737M__novo__Bonvi_Prime__t596_novo_37m35__7.0__Bonvi-Prime.v06.mt6737m.35.n\

All done!

FIRMWARE & FLASH Advan i7U G711A_L68

30 Oktober 201930 Oktober 2019 godsaveusnow ADVAN, BYPASS, FLASH, FRP, GOOGLE, rom ADVAN I7U, ADVANS, AKUN GOOGLE, boot loop, BYPASS, Dead, FIRMWARE, FRP, HAPUS, I7U, rom, spd, STOCK ROM, tanpa box, VERIFIKASI AKUN GOOGLE

FRP Advan i7u ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model : i7U
Product Brand : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10

A. BYPASS FRP ONLY ukuran PAC 1 MB

Download Firmware PAC_Advan i7U_BYPASS_FRP_only atau Download Disini (1MB)

B. Firmware PAC FULL

Download FULL PAC sp9850ka_1h10_Advan_i7U_SL718A_V1.0_20180508 atau Download disini

Tool :

Download SPD_Upgrade_Tool_R4.0.0001 atau Download Disini
Tutorial Flash via research here
Driver SPD by InfinityBox
Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

- Untuk FRP Evercoss Advan i7U tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
- Boot volume (+/-)

Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : PAC : sp9850ka_1h10_Advan_i7U_BYPASS_FRP_LOCK.pac
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : Control transfered!

Boot Done!

Device info :
Patch Level    : NRD90M
Display ID     : i7U_SL718A_V1.0_20180410
Ver. CodeName : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1523356407
Product Model : i7U
Product Brand : ADVAN
Product Name   : i_Lite
Product Device : ADVAN_i_Lite
Product Board : sp9850ka_1h10
Product Manfct : ADVAN
Board Platform : sp9850ka
Product Info   : sp9850ka_1h10

Done!
Elapsed: 00:06:31

912ac-syarat2bdan2bketentuan

Flash & Bypass FRP Evercoss U6 PRIME Firmware PAC

29 Oktober 201929 Oktober 2019 godsaveusnow BYPASS, EVERCOSS, FLASH, FRP, GOOGLE, IMEI, rom AKUN GOOGLE, boot loop, BYPASS, Dead, Evercoss U6, FIRMWARE, FRP, HAPUS, pac, PRIME, rom, STOCK ROM, tanpa box, U6, VERIFIKASI AKUN GOOGLE

FRP Evercoss U6 PRIME Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Loading : sp9850ka_1h10_Evercoss_U6_PRIME_BYPASS_FRP_ONLY.pac

CRVersion : BP_R1.0.0

PacCPUinfo : sp9850ka_1h10

PacVersion : BYPASS_FRP_ONLY

FastCheck : 0x0000287889

Bahan :

A. BYPASS FRP ONLY / BYPASS AKUN GOOGLE

Download Firmware PAC Evercoss U6 PRIME FRP ONLY atau Download Disini (1MB

B. Firmware PAC FULL PLUS BYPASS FRP

Download Firmware PAC Evercoss U6 PRIME FULL plus FRP atau Download Disini

C. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini

D. Tutorial Flash via research here

E. Driver SPD by InfinityBox

F. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

Untuk FRP tinggal pake PAC BYPASS FRP ONLY
Boot volume (+)
Flash Evercoss U6 PRIME via research Download, flash aja dgn rom diatas + BYPASS FRP
BYPASS FRP Sinyal Aman

Cara Bypass FRP Evercoss U6 PRIME

Log Read Info Firmware Evercoss U6 PRIME

Loading : sp9850ka_1h10_Evercoss_U6_PRIME_7.0.015.P1_PLUS_BYPASS_FRP.pac
CRVersion : BP_R1.0.0
PacCPUinfo : sp9850ka_1h10
PacVersion : 7.0.015.P1_PLUS_BYPASS_FRP
FastCheck : 0x00CA4F0C7D

Loading files …

File : fdl1-sign.bin
File : fdl2-sign.bin
File : ltenvitem.bin
File : prodnv.img
File : u-boot-spl-16k-sign.bin
File : ltemodem-sign.bin
File : ltedsp-sign.bin
File : ltegdsp-sign.bin
File : pmsys-sign.bin
File : wcnmodem.bin
File : boot-sign.img
File : recovery-sign.img
File : sysinfo.img
File : system.img
File : userdata.img
File : logo.bin
File : fbootlogo.bin
File : cache.img
File : tos-sign.bin
File : sml-sign.bin
File : u-boot-sign.bin
File : persist.img
File : udc.bin
File : sp9850ka_1h10.xml

Load Ok!

912ac-syarat2bdan2bketentuan

Cara Flash IVVI CK3-M1 CK3-01 via Flash Tool

23 September 201923 September 2019 godsaveusnow BYPASS, FIRMWARE, FLASH, FRP, ivvi, rom AKUN GOOGLE, boot loop, BYPASS, CK3-01, CK3-M1, Copy, Dead, FIRMWARE, FRP, HAPUS, ivvi, rom, STOCK ROM, tanpa box, VERIFIKASI AKUN GOOGLE

FRP IVVI CK3-M1 CK3-01 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand : ivvi

ProdName : CK3-01

ProdModel : CK3-M1

Device : CK3-01

AndroidVer: 5.1

MTKxCPU : MT6735

MTKxPRJ : ALPS.L1.MP3.V2.95_YL6735.65C.VO.L1_P139

Bahan :

1. Download Firmware IVVI CK3-M1 MT6735

Download Rom IVVI CK3-M1 CK3-01 Bypass FRP Only atau Download Disini (1MB)
Full ROM IVVI CK3-M1 CK3-01

2. Download SP-Flash-Tool Wajib pake versi ini Downloadm Disini

3. Driver bila belum punya instal dulu driver mtknya

4. Untuk tutorial flash via Flash tool bisa dilihat DISINI

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash IVVI CK3-M1 CK3-01 via Flash Tool

Log Read Flash IVVI CK3-M1 CK3-01

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 520001154D42315808F107427F0A2BE0
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D4207F108E02B937F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0xFCC4CFBD1308FB18B5B54845423DCA1D
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ivvi
ProdName : CK3-01
ProdModel : CK3-M1
Device    : CK3-01
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L1.MP3.V2.95_YL6735.65C.VO.L1_P139

[Read Ok] : preloader_ck3_01.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : lk_bak.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / ck3_01 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3160 MiB
Scatter saved to : F:\New folder\MT6735__ivvi__CK3-M1__CK3-01__5.1__ALPS.L1.MP3.V2.95_YL6735.65C.VO.L1_P139\

FRP Wellcome P20pro P10 Verifikasi akun Google

14 Agustus 201914 Agustus 2019 godsaveusnow BYPASS, FIRMWARE, FLASH, FRP, GOOGLE, rom, Tak Berkategori, wellcome AKUN GOOGLE, boot loop, BYPASS, Copy, Dead, FIRMWARE, FRP, HAPUS, HUAWEI, p10, p20, pro, rom, STOCK ROM, tanpa box, VERIFIKASI AKUN GOOGLE, welcome

FRP Wellcome P20pro P10 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand : WELCOME

ProdName : P20 Pro

ProdModel : P10

Device : P20Pro

AndroidVer: 8.1

MTKxCPU : MT6580

MTKxPRJ : ALPS.L1.MP6.V2_DROI6580.WEG.L

Bahan :

1. Download Firmware Wellcome P20pro P10 preloader_f9b1_tc_g4

Download Rom Wellcome P20pro P10 Bypass FRP Only atau Download Disini (1MB)
Full ROM MT6580__WELCOME__P10__P20Pro__8.1__f9b1_tc_g4

2. Download Firmware Firmware Wellcome P20pro P10 preloader aeon6580_weg_l_l100

Download Rom Wellcome P20pro P10 Bypass FRP Only atau Download Disini (1MB)
Full ROM Welcome_P20_Pro_p10_aeon6580_weg_l_l100

3. Download SP-Flash-Tool Wajib pake versi ini Downloadm Disini

4. Driver bila belum punya instal dulu driver mtknya

5. Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Wellcome P20pro P10 via Flash Tool

Untitled

Log Read Flash Wellcome P20pro P10

Start at : [8/10/2019 / 12:20:11 PM]
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D42014BFAC2F57251
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42014BFAC2F57251
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD0F067DBCE8A5FE03A02807EB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : WELCOME
ProdName : P20 Pro
ProdModel : P10
Device    : P20Pro
AndroidVer: 8.1
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_DROI6580.WEG.L

[Read Ok] : preloader_f9b1_tc_g4.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / f9b1_tc_g4 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1518 MiB
Scatter saved to : F:\New folder (3)\New folder (2)\MT6580__WELCOME__P10__P20Pro__8.1__ALPS.L1.MP6.V2_DROI6580.WEG.L\

All done!

Cara Bypass FRP & Flash Wiko Jerry

26 Juni 201926 Juni 2019 godsaveusnow FIRMWARE, FLASH, rom, wiko AKUN GOOGLE, boot loop, BYPASS, Dead, FIRMWARE, FRP, HAPUS, JERRY, rom, STOCK ROM, tanpa box, VERIFIKASI AKUN GOOGLE, wiko

FRP Wiko Jerry Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Brand : WIKO

ProdName : V2802AN

ProdModel : JERRY

Device : V2802AN

AndroidVer: 6.0

MTKxCPU : MT6580

MTKxPRJ : ALPS.W10.24.p0

Bahan :

1. Download Bypass FRP Only

Download Rom Wiko Jerry Bypass FRP Only atau Download Disini (1MB)

2. Download Firmware Full

MT6580__WIKO__JERRY__V2802AN__6.0__ALPS.W10.24.p0

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5. Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Bypass Frp Wiko Jerry via Flash Tool

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 21 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4838473165050728F192486379
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050728F192486379
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD986688463A1F82699ED77051
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : WIKO
ProdName : V2802AN
ProdModel : JERRY
Device    : V2802AN
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.W10.24.p0

[Read Ok] : preloader_v2802.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : ewdata.img
[Read Ok] : apedata.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v2802 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2276 MiB
Scatter saved to : D:\wiko\jerry\New folder\MT6580__WIKO__JERRY__V2802AN__6.0__ALPS.W10.24.p0\

All done!

	kllpoo pada Firmware & Flash Wearnes Z…
	DESTYOP pada Firmware NOTE 10+ N-SERIES \| M…
	CAHYO pada Download Rom Firmware X27 plus…
	Afro Belitung Cell pada Download Rom Firmware X27 plus…
	kllpoo pada Firmware NOTE 10+ N-SERIES \| M…

KangSuper

powered by kangsuper.blogspot.co.id

boot loop

Firmware Maimeite NOTE30 PLUS | NOTE 30 +

Firmware & Flash Wearnes ZeusPhone ZP-541

Firmware Huawei Nova 7 PRO | COPY/CLONE l MT6580alpsnova_7_Pro__nova_7_Pro__5.1

FLASH & Firmware RINO 3 | RINO 3 PRO | MTK6763 FAKE | MT6572 SCATER FILE

Firmware Novo BONVI Prime scatter

FIRMWARE & FLASH Advan i7U G711A_L68

Flash & Bypass FRP Evercoss U6 PRIME Firmware PAC

Cara Flash IVVI CK3-M1 CK3-01 via Flash Tool

FRP Wellcome P20pro P10 Verifikasi akun Google

Cara Bypass FRP & Flash Wiko Jerry