Firmware & BYPASS FRP Maxtron V13 & V13+ ~ REPAIR BLANK SCREEN

 

BYPASS FRP Maxtron V13 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Model Name  : sp7731c_c7367_fwvga_oversea

Model Brand : S50H

Model Device: sp7731c_c7367_fwvga

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : MAXTRON_V13_V04_20170824

Model Ext   : MAXTRON_V13

BYPASS FRP Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

===============================================

1. MAXTRON V13 ( Gambar dibawah)

A. BYPASS FRP ONLY ukuran PAC 1 MB

ONLY SC7731C

  1. Download Firmware PAC Maxtron V13_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. Firmware PAC FULL

  1. Download SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824 atau Download disini

===============================================

2. MAXTRON V13+ ( Gambar dibawah)

A. BYPASS FRP ONLY ukuran PAC 1 MB

ONLY SC7731C

  1. Download Firmware PAC SC7731C_Maxtron_V13+_V3.0_20171205_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. Firmware PAC FULL

  1. Download SC7731C_Maxtron_V13+_V3.0_20171205 atau Download disini

===============================================

Tool :

  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Untuk FRP Maxtron V13 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
  • Boot volume (+/-)
  •  Sinyal Aman

Cara Bypass Maxtron V13  via Research Download

Log Read Flash Maxtron V13

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
====  Wait for phone…
Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
lashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_c7367_fwvga_oversea
Model Brand : S50H
Model Device: sp7731c_c7367_fwvga
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MAXTRON_V13_V04_20170824
Model Ext   : MAXTRON_V13
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1553 MiB
Saved to : D:\maxtron\Maxtron V13\SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824_MAXTRON_V13\
Done!

syarat-dan-ketentuan

 

Firmware BellPhone BP268

Brand     : alps

ProdName  : full_keytak6580_weg_l

ProdModel : BP268

Device    : keytak6580_weg_l

AndroidVer: 6.0

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

Bahan :

1. Download Firmware Full

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini

3. Driver bila belum punya instal dulu driver mtknya

4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

  • Bellphone BP268 MTK versi Lain Download Di bawah
  1. MT6580__alps__BP268__er241c_m05_20170829_2017

Cara Flash Bellphone BP628 via Flash Tool

Untitled

Log Read Firmware BellPhone BP268

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473C346F0EC15151
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473C346F0EC15151
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD7AD1AE2CE3514D83B7F3DA9F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1382 MiB
Scatter saved to : D:\ANDROID LAIN2\Bellphone\BP268\MT6580__alps__BP268__keytak6580_weg_l__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24\

All done!

syarat-dan-ketentuan

Flash & Bypass Micloud Redmi 5S (2015711) & 5S PLUS (2016070)

                              
 LETAK TESTPOINT REDMI 5S DAN REDMI 5S PLUS

Lock Micloud Redmi 5S & 5S Plus ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

ROM 5S bukan Global tapi CN
ROM 5S plus Global
Imei & Wifi AMAN
BAHAN :

  1. Rom Flash via MIFLASH BYPASS Redmi 5S capricorn_images_V8.0.10.0_6.0_cn   download disini atau disini
  2. Rom Flash via MIFLASH BYPASS Redmi 5S PLUS Natrium_Global_images_V8.0.4.0_6.0_Global download disini atau disini
  3. Download Tool dan Driver buat Flash DOWNLOAD DISINI atau Download Disini
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Langkah Kerja :

– Extrak file dan install tool dan driver (tested on WIN- 64BIT)
-COPOT SIM CARD
– Konek Test Poin pada Gambar diatas, Letak Titik TP EDL 9008 Redmi 5S, kemudian colok kabel usb, terdetek di pc, hs-9008
-FLASH Redmi 5S
-Setelah masuk menu baru pasang SIM CARD

Cara Flash Redmi5S sama dengan Flash xiaomi redmi lain, cek video dibawah

 

Flash & Bypass Micloud Redmi 4 Prada (2016090) & Markw (2016060) & QCN

 

 LETAK TEST POINT REDMI 4 PRADA DAN REDMI 4 MARKW

Lock Micloud Redmi 4 ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Brand     : Xiaomi
ProdName  : prada
ProdModel : Redmi 4
Device    : prada
AndroidVer: 6.0.1
Manufact. : Xiaomi
SysPatch  : MMB29M
DevComTime: 11/16/2016 7:20:28 AM
QLMxCPU   : MSM8937

ROM Redmi 4 dibawah ROM CN Bukan Global
Redmi 4 Markw 2016060
Redmi 4 Prada 2016090
Imei & Wifi AMAN
BAHAN :

1. REDMI 4 PRADA

2. REDMI 4  PRIME MARKW

3. Download Tool dan Driver buat Flash DOWNLOAD DISINI atau Download Disini

4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Langkah Kerja :

– Extrak file dan install tool dan driver (tested on WIN -32BIT / 64BIT)
-COPOT SIM CARD
– Konek Test Poin pada Gambar diatas, Letak Titik TP EDL 9008 Redmi 4, kemudian colok kabel usb, terdetek di pc, hs-9008
-FLASH Redmi 4
-Setelah masuk menu baru pasang SIM CARD

Cara Flash Redmi 4 sama dengan Flash xiaomi redmi lain, cek video dibawah

Write QCN REDMI 4 Markw Repair Baseband & Imei

Log Read Info Redmi 4 Prada
Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 430 [MSM8937]
ID_BLOCK_S : C3D77F7F
ID_BLOCK_L : 9FD84B67D5DC04577E72DE891D897146
ID_BLOCK_L : A15F158C436A7CB2AD3CD5D0AF1FCBBE
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x11 , VENDOR : TOSHIBA , NAME : 016G32
Boot Ok!

Brand     : Xiaomi
ProdName  : prada
ProdModel : Redmi 4
Device    : prada
AndroidVer: 6.0.1
Manufact. : Xiaomi
SysPatch  : MMB29M
DevComTime: 11/16/2016 7:20:28 AM
QLMxCPU   : MSM8937

USERData : ENCRYPTED
GCSec    : NORMAL

Done!
Elapsed: 00:00:14

Flash PHICOMM C230 via 9008 & SDCARD

Brand     : PHICOMM
ProdName  : msm8610
ProdModel : PHICOMM CLUE C230
Device    : msm8610
AndroidVer: 4.3
Manufact. : PHICOMM
QLMxCPU   : MSM8610

DevInfo : MSM8610__PHICOMM__PHICOMM__ANDR_v4.3__PHICOMM_CLUE_C230__msm8610__msm8610

Tool Flash wajib mengunakan CM2

Bahan :
1. Download Firmware PHICOMM 230 atau Download Disini
2. Tool wajib Infinity CM2, BOOT VOLUME UP + DOWN
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash PHICOMM C230 via SDCARD
1. Download Update.zip PHICOMM C230 atau Download Disini
2. Masuk recovery, volume (-)
3. Pilih Update from external storage
4. Tunggu sampe done
5. Reset factory
6. Restrart & done

Cara Flash PHICOMM C230 via CM2

Log Read Firmware PHICOMM C230
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 0478EEBF
ID_BLOCK_I : 008110E1
ID_BLOCK_L : C43C56A00F9B80837CD1232CEBB63E0E
ID_BLOCK_L : 5322EC3F30A30B983DF8DD0A189781CA
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Brand     : PHICOMM
ProdName  : msm8610
ProdModel : PHICOMM CLUE C230
Device    : msm8610
AndroidVer: 4.3
Manufact. : PHICOMM
QLMxCPU   : MSM8610

DevInfo : MSM8610__PHICOMM__PHICOMM__ANDR_v4.3__PHICOMM_CLUE_C230__msm8610__msm8610

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : usbdisk.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1991 MiB

Repair Lenovo A2020a40 Blank Putih After Flash

Device Brand    : Lenovo
Device Manufact.: LENOVO
Device Model    : angus3A4
Device CPU      : MSM8909
Device IntName  : angus3A4
Device Version  : 5.1.1
CU_SWVer        : LENOVO
Device Compile  : 9/20/2016 8:31:44 AM
Device ExtInfo  : Lenovo A2020a40

Setelah Flash, lenovo A2020a40 white screen seperti gambar dibawah :

Bahan :
1. Download Firmware Lenovo A2020a40 Buat FIX Blank Putih setelah Flash

2. ONE CLICK FRP LENOVO A2020a40.bat DOWNLOAD DISINI
3. Tool QPST_2.7.422 download disini
4. Tutorial silahkan lihat di video di bawah
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara :
1. Buat FRP Lenovo A2020a40 via Fastboot, untuk selengkapnya silahkan klik disini
2. Download Mode 9008, PENCET VOLUME UP+DOWN, terus colok kabel

Cara Flash Lenovo A2020a40 via QPST

Log Info Lenovo A2020a40 via cm2
Device Brand    : Lenovo
Device Manufact.: LENOVO
Device Model    : angus3A4
Device CPU      : MSM8909
Device IntName  : angus3A4
Device Version  : 5.1.1
CU_SWVer        : LENOVO
Device Compile  : 9/20/2016 8:31:44 AM
Device ExtInfo  : Lenovo A2020a40

Flash Hisense HS-L695 via Mode HS 9008

Hisense HS-L695 PureShot Plus
Brand     : Hisense
ProdName  : L695
ProdModel : HS-L695
Device    : L695
AndroidVer: 5.0.2
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1117.6.04.02.ID00

DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.0.2__HS-L695__L695__L695__L1117.6.04.02.ID00

Tool Flash wajib mengunakan CM2

Bahan :
1. Download Firmware Hisense HS-L695 atau Download Disini
2. Tool wajib Infinity CM2
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Hisense HS-L695 via CM2

Log Read Firmware Hisense HS-L695
Operation : Read Flash [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone…
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 00CE56A1
ID_BLOCK_I : 0091B0E1
ID_BLOCK_L : 26DEB442ED7966615E33DDC20D54DCEC
ID_BLOCK_L : 85F846E9EA75E56E635207FCF6393714
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8929 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : Hisense
ProdName  : L695
ProdModel : HS-L695
Device    : L695
AndroidVer: 5.0.2
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1117.6.04.02.ID00

DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.0.2__HS-L695__L695__L695__L1117.6.04.02.ID00

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : diag.bin
[Read Ok] : lsplash.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8929 / eMMC
Firmware Size : 2584 MiB

Done!