Flash & Firmware Brancode B77

Model Name  : sp7731c_1h10_32v4_oversea
Model Brand : wanda
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : B77_16B_2SIM_20161122
Model Ext   : B77

PENTING !!! Kami hanya Upload 1 file mohon dicek versi dkk, backup dulu kalau perlu
Bahan :

  1.  Download Firmware PAC Brancode  B77 16B_2SIM_20161122 atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume +

Cara Flash Brandcode B77 via Research Download

Log Read Firmware Brandcode B77

Operation : Read FullFlash [ v1.27 ]
1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_1h10_32v4_oversea
Model Brand : wanda
Model Device: sp7731c_1h10_32v4
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : B77_16B_2SIM_20161122
Model Ext   : B77

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.43.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1681 MiB
Saved to : E:\andro 1\brandcode\b77\SP7731CEB_sp7731c_1h10_32v4_6.0_B77_16B_2SIM_20161122_B77\
Done!

 

Flash & Firmware Brandcode B29 MTK & SPD

BRANCODE B29 MTK MT6572

Brandcode B29
Brand     : kimfly
ProdName  : B29
ProdModel : B29
Device    : kimfly
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

NOTE :  cek fisik, slot simcard, mmc, dan versi
Bahan :
1). BRANCODE B29 MTK

    1.) Download Firmware Brandcode B29 MT6572 V1.3 atau Download Disini

            Brandcode B29 MT6572 V1.3
     
    2.) Download Firmware Brandcode B29 MT6572 V1.6 atau Download Disini

     

        Brandcode B29 MT6572 V1.6

    3.) DOWNLOAD ROM Versi lain Brancode B29 MT6572 NAND Download Disini

    4. Download Flash Tool DOWNLOAD DISINI
    5. Driver bila belum punya instal dulu driver mtknya
    6. Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k



      2). BRANCODE B29 SPD

      1.  Download Firmware PAC BRANCODE B29 SC7715 atau  Download Disini
      2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
      3.  Driver SPD by InfinityBox
      4.  Tutorial Flash via research here
      5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
       BRANCODE B29 SPD SC7715

       Error pada research download baca disini

       Cara Flash Brancode B29 via Flash Tool

      Log Read Firmware Brandcode B29
      Operation : Read Flash [ v1.46 ]

      1. Power Off Phone , Remove battery , Insert back
      2. Insert USB cable. In some cases require hold BootKey

      Wait for phone…
      Phone found! [ 3 ]
      Sync…
      Inital Boot Ok!
      BB_CPU_PID : 6572
      BB_CPU_NME : [MediaTek] MT6572_S00
      BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
      Processing BROM stage
      Settings for BROM configured!
      SecCfgVal : 0x00000000
      BromVer   : 0x00FF
      BLVersion : 0x0001
      PreLoader : Active [ Boot with PL ]
      BootLdrSS : NORMAL with SPRELOADER
      Processing DA stage
      DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
      Sending and initialize DA …
      Running DA ver.4.2 on BBID : 0x88
      NAND Flash : 009800BC009000660076001600080000
      eMMC Flash : NOT INSTALLED
      Initialize Memory …
      DRAM already initialized by Preloader
      NAND FlashIC initialized
      [NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
      [NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
      [NAND] : FLASH_LEN : 0x20000000
      [NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
      DEV RID    : 5FD5016174E9B287C1225491E5932EF0
      INT RAM    : 0x00020000
      EXT RAM    : 0x10000000
      BOOT TYPE  : NAND_FLASH_BOOT
      SOC VERIFY : C1
      Boot Ok!

      Reading Flash Content now …

      [Read Ok] : preloader_yuanda72_cwet_lca.bin
      [Read Ok] : lk.bin
      [Read Ok] : boot.img
      [Read Ok] : recovery.img
      [Read Ok] : secro.img
      [Read Ok] : logo.bin
      [Read Ok] : system.img
      [Read Ok] : cache.img
      [Read Ok] : usrdata.img

      [ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND
      FW Size : 316 MiB

      Brand     : kimfly
      ProdName  : B29
      ProdModel : B29
      Device    : kimfly
      AndroidVer: 4.4.2
      MTKxCPU   : MT6572
      MTKxPRJ   : ALPS.KK1.MP7.V1

      Android Info saved

      Scatter saved to : E:\andro 1\brandcode\b29\MT6572_NAND_kimfly__B29__kimfly__4.4.2__ALPS.KK1.MP7.V1

      Done!

      Flash Brandcode B73 Nand

      Brand     : Brandcode
      ProdName  : B73
      ProdModel : B73
      Device    : Brandcode
      AndroidVer: 4.4.2
      MTKxCPU   : MT6572
      MTKxPRJ   : ALPS.KK1.MP7.V1

      Bahan :

       Download Firmware Brandcode :

       
      Versi Lain Brancode B73

      1.  Download Flash Tool DOWNLOAD DISINI
      2.  Driver bila belum punya instal dulu driver mtknya
      3.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
      4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      note :
      bila tidak tahu versinya, buat jaga2, uncheck uboot/lk

      Cara Flash Tablet Brandcode B73 via Flash Tool

      Log Read Firmware Brandcode B73
      Operation : Read Flash [ v1.46 ]

      1. Power Off Phone , Remove battery , Insert back
      2. Insert USB cable. In some cases require hold BootKey

      Wait for phone…
      Phone found! [ 3 ]
      Sync…
      Inital Boot Ok!
      BB_CPU_PID : 6572
      BB_CPU_NME : [MediaTek] MT6572_S00
      BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
      Processing BROM stage
      Settings for BROM configured!
      SecCfgVal : 0x00000000
      BromVer   : 0x00FF
      BLVersion : 0x0001
      PreLoader : Active [ Boot with PL ]
      BootLdrSS : NORMAL with SPRELOADER
      Processing DA stage
      DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
      Sending and initialize DA …
      Running DA ver.4.2 on BBID : 0x88
      NAND Flash : 009800BC009000660076001600080000
      eMMC Flash : NOT INSTALLED
      Initialize Memory …
      DRAM already initialized by Preloader
      NAND FlashIC initialized
      [NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
      [NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
      [NAND] : FLASH_LEN : 0x20000000
      [NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
      DEV RID    : 2F811F793DCFD6539D00E2FFFD8D7A80
      INT RAM    : 0x00020000
      EXT RAM    : 0x10000000
      BOOT TYPE  : NAND_FLASH_BOOT
      SOC VERIFY : C1
      Boot Ok!
      Reading Flash Content now …
      [Read Ok] : preloader_yuanda72_cwet_lca.bin
      [Read Ok] : lk.bin
      [Read Ok] : boot.img
      [Read Ok] : recovery.img
      [Read Ok] : secro.img
      [Read Ok] : logo.bin
      [Read Ok] : system.img
      [Read Ok] : cache.img
      [Read Ok] : usrdata.img
      [ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND
      FW Size : 319 MiB
      Brand     : Brandcode
      ProdName  : B73
      ProdModel : B73
      Device    : Brandcode
      AndroidVer: 4.4.2
      MTKxCPU   : MT6572
      MTKxPRJ   : ALPS.KK1.MP7.V1
      Android Info saved
      Scatter saved to : E:\andro 1\brandcode\b73\nand\New folder\MT6572_NAND_Brandcode__B73__Brandcode__4.4.2__ALPS.KK1.MP7.V1

      Flash Brandcode B11 ~ Fix LCD Buram After Flash

      Brandcode B11 BP237_Brandcode_V2.1_20161119
      Model Name  : t13_bc_237_64_8_dt
      Model Brand : SPRD
      Model Device: t13_bc_237_64_8
      AndrVersion : 5.1
      BaseBand CPU: T13_BC_237_64_8
      Project Ver : 20161119
      Model Ext   : B11

      Brandcode V2.1 diflash pake V1.0, alhasil LCD jadi Burem kemudian gelap, tapi muncul suara.

      Bahan:
      1. Download Firmware PAC Brandcode B11

      2. Download Research Download R2.10
      3. Driver SPD by InfinityBox
      4. Turorial Flash via research here
      5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
      Error pada research download baca disini

      Note :
      1. BOOT Volume +
      2. Samakan versi
      3. kalo gak tau versi, mending uncek uboot, boot, logo, erase uboot

      Cara Flash  Brancode B11 via Research Download

      Log Read Firmware Brandcode B11
      Operation : Read FullFlash [ v1.25 ]

      1. Remove battery. Insert battery back
      2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
      3. Insert cable

       ====  Wait for phone…

      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      FlashMode Set : Ok!
      Detected eMMC Flash , Structure detect Ok!
      [FW_READER] : Prepare Ok!
      – >Wait phone connected …
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      – > Wait phone connected …
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      Model Name  : t13_bc_237_64_8_dt
      Model Brand : SPRD
      Model Device: t13_bc_237_64_8
      AndrVersion : 5.1
      BaseBand CPU: T13_BC_237_64_8
      Project Ver : 20161119
      Model Ext   : B11
      [Read Mode] : HSUSB : 0x3000
      [FW_READER] : Reading Firmware Now …
      [Read Ok] : u-boot-spl-16k.bin
      [Read Ok] : u-boot.bin
      [Read Ok] : prodnv.img
      [Read Ok] : sc7731C_CP0_modem.bin
      [Read Ok] : DSP_DM_Gx.bin
      [Read Ok] : nvitem_w.bin
      [Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
      [Read Ok] : nvitem_wcn.bin
      [Read Ok] : logo_480x854.bin
      [Read Ok] : fblogo.bin
      [Read Ok] : boot.img
      [Read Ok] : system.img
      [Read Ok] : oem.img
      [Build Ok] : cache.img
      [Read Ok] : recovery.img
      [Build Ok] : userdata.img
      AndroidInfo created
      Firmware Size : 2329 MiB
      Saved to : E:\andro 1\brandcode\b11\T13_BC_237_64_8_t13_bc_237_64_8_5.1_20161119_B11\
      Done!

      Flash Brandcode B4S MT6572 EMMC & NAND


      Brand     : B4S
      ProdName  : B4S
      ProdModel : B4S
      Device    : B4S
      AndroidVer: 4.4.2
      MTKxCPU   : MT6572
      MTKxPRJ   : ALPS.KK1.MP7.V1

      Bahan :
      Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      1.  Download Firmware Brandcode B4S 

      *Firmware Brandcode B4S MT6572
      a) Download  Firmware Brandcode B4S MT6572-EMMC

       

      b) Download Brandcode B4S MT6572-NAND

       

      *Firmware Brandcode B4S MT6580
      c) Download Firmware Brandcode B4S MT6580  atau Download Disini

        2. Download Flash Tool DOWNLOAD DISINI
        3. Driver bila belum punya instal dulu driver mtknya
        4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
        5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

        NOTE :
        -Bila gak tau versi, uncheck uboot/lk, boot, logo
        -Kami upload MT6572 4 versi, dan MT6580 1 versi, mohon teliti, thx

        Cara Flash Brandcode B4S Flash Tool

        Log Read Firmware Brandcode B4S
        Operation : Read Flash [ v1.46 ]

        1. Power Off Phone , Remove battery , Insert back
        2. Insert USB cable. In some cases require hold BootKey

        Wait for phone…
        Phone found! [ 3 ]
        Sync…
        Inital Boot Ok!
        BB_CPU_PID : 6572
        BB_CPU_NME : [MediaTek] MT6572_S00
        BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
        Processing BROM stage
        Settings for BROM configured!
        SecCfgVal : 0x00000000
        BromVer   : 0x00FF
        BLVersion : 0x0001
        PreLoader : Active [ Boot with PL ]
        BootLdrSS : NORMAL with SPRELOADER
        Processing DA stage
        DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
        Sending and initialize DA …
        Running DA ver.4.2 on BBID : 0x88
        NAND Flash : NOT INSTALLED
        eMMC Flash : 70010053313030303408C1F0AD109131
        Initialize Memory …
        DRAM already initialized by Preloader
        eMMC FlashIC initialized
        [eMMC] : FLASH_VEN : 0x70 , OEM : 0100
        [eMMC] : FLASH_INF : [KINGSTON] , 40001
        [eMMC] : FLASH_CID : 70010053313030303408C1F0AD109131
        [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
        [eMMC] : FLASH_LEN : 0x00000000E4000000
        [eMMC] : FLASH_UCP : 3648 MiB [eMMC 4 GiB]
        DEV RID    : 0407F9ACB438F7F9C943332A7D9E6671
        INT RAM    : 0x00020000
        EXT RAM    : 0x20000000
        BOOT TYPE  : EMMC_FLASH_BOOT
        SOC VERIFY : C1
        Boot Ok!

        Reading Flash Content now …

        Brand     : B4S
        ProdName  : B4S
        ProdModel : B4S
        Device    : B4S
        AndroidVer: 4.4.2
        MTKxCPU   : MT6572
        MTKxPRJ   : ALPS.KK1.MP7.V1

        [Read Ok] : preloader_v4_e324_3gb15_wvga_v1bom_g006s.bin
        [Read Ok] : MBR
        [Read Ok] : EBR1
        [Read Ok] : lk.bin
        [Read Ok] : boot.img
        [Read Ok] : recovery.img
        [Read Ok] : secro.img
        [Read Ok] : logo.bin
        [Read Ok] : system.img
        [Make Ok] : cache.img
        [Make Ok] : userdata.img

        [ScatCFG] : MT6572 / V1.1.1 / v4_e324_3gb15_wvga_v1bom_g006s / EMMC
        Android Info saved
        MAUI Meta DB saved
        HWConfig Info saved
        FW Size : 691 MiB
        Scatter saved to : F:\andro3\brandcode\b4s\MT6572__B4S__B4S__B4S__4.4.2__ALPS.KK1.MP7.V1\

        Flash Brancode B9

        Model Name  : scx15_sp7715ga_c01_b_brandcode_plus
        Model Brand : B9
        Model Device: scx15_sp7715ga_c01_b_brandcode
        AndrVersion : 4.4.2
        BaseBand CPU: SCX15_SP7715GA_C01_B
        Project Ver : KOT49H test-keys
        Model Ext   : B9

        Bahan :
        1. Download Firmware PAC Brancode B9
        2. Download Research Download R2.10
        3. Driver SPD by InfinityBox
        4. Turorial Flash via research here
        5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

        Error pada research download baca disini

        Log read firmware Brancode B9

         ====  Wait for phone…

        Phone found! [ 34 ]
        Port Opened
        Sync…
        InitBoot Done [ 0x81 ] , Ver : SPRD3
        Sync…
        Sending FDL
        [Info] : If SW freeze here more, than 15 seconds – remove cable
        FDL Ready!
        Boot Ver : SC7715 Loader NAND v1.1 Infinity
        Sending FLASH FDL
        FLASH FDL Ready!
        Boot Ok!

        FlashMode Set : Ok!
        Detected NAND Flash , Structure detect Ok!

        [FW_READER] : Step #1 Passed!
        [FW_READER] : Step #2 Passed!
        [FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
        [FW_READER] : Step #3 Passed!

        Model Name  : scx15_sp7715ga_c01_b_brandcode_plus
        Model Brand : B9
        Model Device: scx15_sp7715ga_c01_b_brandcode
        AndrVersion : 4.4.2
        BaseBand CPU: SCX15_SP7715GA_C01_B
        Project Ver : KOT49H test-keys
        Model Ext   : B9

        [Read Mode] : HSUSB : 0x3000

        [FW_READER] : Reading Firmware Now …

        [Read Ok] : u-boot-spl-16k.bin
        [Read Ok] : u-boot.bin
        [Read Ok] : prodnv_b256k.img
        [Read Ok] : nvitem_w.bin
        [Read Ok] : nvitem_wcn.bin
        [Read Ok] : sc7715_modem.bin
        [Read Ok] : DSP_DM_Gx.bin
        [Read Ok] : sc7715_modem_sc7715_cp2.bin
        [Read Ok] : logo_320x480.bin
        [Read Ok] : seclogo.bin
        [Read Ok] : boot.img
        [Read Ok] : system_b256k.img
        [Read Ok] : cache_b256k.img
        [Read Ok] : recovery.img
        [Read Ok] : userdata_b256k.img

        AndroidInfo created
        Firmware Size : 328 MiB
        Saved to : G:\andro3\brandcode\b9\SCX15_SP7715GA_C01_B_[NAND_b256k]_scx15_sp7715ga_c01_b_brandcode_4.4.2_KOT49H_test-keys_B9\
        Done!

        Elapsed: 00:10:26