Flash & Firmware Brandcode B29 MTK & SPD

BRANCODE B29 MTK MT6572

Brandcode B29
Brand     : kimfly
ProdName  : B29
ProdModel : B29
Device    : kimfly
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP7.V1

NOTE :  cek fisik, slot simcard, mmc, dan versi
Bahan :
1). BRANCODE B29 MTK

    1.) Download Firmware Brandcode B29 MT6572 V1.3 atau Download Disini

            Brandcode B29 MT6572 V1.3
     
    2.) Download Firmware Brandcode B29 MT6572 V1.6 atau Download Disini

     

        Brandcode B29 MT6572 V1.6

    3.) DOWNLOAD ROM Versi lain Brancode B29 MT6572 NAND Download Disini

    4. Download Flash Tool DOWNLOAD DISINI
    5. Driver bila belum punya instal dulu driver mtknya
    6. Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k



      2). BRANCODE B29 SPD

      1.  Download Firmware PAC BRANCODE B29 SC7715 atau  Download Disini
      2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
      3.  Driver SPD by InfinityBox
      4.  Tutorial Flash via research here
      5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
       BRANCODE B29 SPD SC7715

       Error pada research download baca disini

       Cara Flash Brancode B29 via Flash Tool

      Log Read Firmware Brandcode B29
      Operation : Read Flash [ v1.46 ]

      1. Power Off Phone , Remove battery , Insert back
      2. Insert USB cable. In some cases require hold BootKey

      Wait for phone…
      Phone found! [ 3 ]
      Sync…
      Inital Boot Ok!
      BB_CPU_PID : 6572
      BB_CPU_NME : [MediaTek] MT6572_S00
      BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
      Processing BROM stage
      Settings for BROM configured!
      SecCfgVal : 0x00000000
      BromVer   : 0x00FF
      BLVersion : 0x0001
      PreLoader : Active [ Boot with PL ]
      BootLdrSS : NORMAL with SPRELOADER
      Processing DA stage
      DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
      Sending and initialize DA …
      Running DA ver.4.2 on BBID : 0x88
      NAND Flash : 009800BC009000660076001600080000
      eMMC Flash : NOT INSTALLED
      Initialize Memory …
      DRAM already initialized by Preloader
      NAND FlashIC initialized
      [NAND] : FLASH_VEN : 0x0011 , [KINGSTON] KTN0403CS_TCR1
      [NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0016 0008
      [NAND] : FLASH_LEN : 0x20000000
      [NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
      DEV RID    : 5FD5016174E9B287C1225491E5932EF0
      INT RAM    : 0x00020000
      EXT RAM    : 0x10000000
      BOOT TYPE  : NAND_FLASH_BOOT
      SOC VERIFY : C1
      Boot Ok!

      Reading Flash Content now …

      [Read Ok] : preloader_yuanda72_cwet_lca.bin
      [Read Ok] : lk.bin
      [Read Ok] : boot.img
      [Read Ok] : recovery.img
      [Read Ok] : secro.img
      [Read Ok] : logo.bin
      [Read Ok] : system.img
      [Read Ok] : cache.img
      [Read Ok] : usrdata.img

      [ScatCFG] : MT6572 / V1.1.1 / yuanda72_cwet_lca / NAND
      FW Size : 316 MiB

      Brand     : kimfly
      ProdName  : B29
      ProdModel : B29
      Device    : kimfly
      AndroidVer: 4.4.2
      MTKxCPU   : MT6572
      MTKxPRJ   : ALPS.KK1.MP7.V1

      Android Info saved

      Scatter saved to : E:\andro 1\brandcode\b29\MT6572_NAND_kimfly__B29__kimfly__4.4.2__ALPS.KK1.MP7.V1

      Done!

      Flash Brandcode B11 ~ Fix LCD Buram After Flash

      Brandcode B11 BP237_Brandcode_V2.1_20161119
      Model Name  : t13_bc_237_64_8_dt
      Model Brand : SPRD
      Model Device: t13_bc_237_64_8
      AndrVersion : 5.1
      BaseBand CPU: T13_BC_237_64_8
      Project Ver : 20161119
      Model Ext   : B11

      Brandcode V2.1 diflash pake V1.0, alhasil LCD jadi Burem kemudian gelap, tapi muncul suara.

      Bahan:
      1. Download Firmware PAC Brandcode B11

      2. Download Research Download R2.10
      3. Driver SPD by InfinityBox
      4. Turorial Flash via research here
      5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
      Error pada research download baca disini

      Note :
      1. BOOT Volume +
      2. Samakan versi
      3. kalo gak tau versi, mending uncek uboot, boot, logo, erase uboot

      Cara Flash  Brancode B11 via Research Download

      Log Read Firmware Brandcode B11
      Operation : Read FullFlash [ v1.25 ]

      1. Remove battery. Insert battery back
      2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
      3. Insert cable

       ====  Wait for phone…

      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      FlashMode Set : Ok!
      Detected eMMC Flash , Structure detect Ok!
      [FW_READER] : Prepare Ok!
      – >Wait phone connected …
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      – > Wait phone connected …
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      Model Name  : t13_bc_237_64_8_dt
      Model Brand : SPRD
      Model Device: t13_bc_237_64_8
      AndrVersion : 5.1
      BaseBand CPU: T13_BC_237_64_8
      Project Ver : 20161119
      Model Ext   : B11
      [Read Mode] : HSUSB : 0x3000
      [FW_READER] : Reading Firmware Now …
      [Read Ok] : u-boot-spl-16k.bin
      [Read Ok] : u-boot.bin
      [Read Ok] : prodnv.img
      [Read Ok] : sc7731C_CP0_modem.bin
      [Read Ok] : DSP_DM_Gx.bin
      [Read Ok] : nvitem_w.bin
      [Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
      [Read Ok] : nvitem_wcn.bin
      [Read Ok] : logo_480x854.bin
      [Read Ok] : fblogo.bin
      [Read Ok] : boot.img
      [Read Ok] : system.img
      [Read Ok] : oem.img
      [Build Ok] : cache.img
      [Read Ok] : recovery.img
      [Build Ok] : userdata.img
      AndroidInfo created
      Firmware Size : 2329 MiB
      Saved to : E:\andro 1\brandcode\b11\T13_BC_237_64_8_t13_bc_237_64_8_5.1_20161119_B11\
      Done!