brick

Firmware & BYPASS FRP Maxtron V13 & V13+ ~ REPAIR BLANK SCREEN

godsaveusnow BYPASS, FIRMWARE, FLASH, FRP, GOOGLE, IMEI, maxtron, rom, Tak Berkategori , , , , , , ,

 

BYPASS FRP Maxtron V13 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya. thx

Model Name  : sp7731c_c7367_fwvga_oversea

Model Brand : S50H

Model Device: sp7731c_c7367_fwvga

AndrVersion : 6.0

BaseBand CPU: SP7731CEB

Project Ver : MAXTRON_V13_V04_20170824

Model Ext   : MAXTRON_V13

BYPASS FRP Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

===============================================

1. MAXTRON V13 ( Gambar dibawah)

A. BYPASS FRP ONLY ukuran PAC 1 MB

ONLY SC7731C

  1. Download Firmware PAC Maxtron V13_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. Firmware PAC FULL

  1. Download SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824 atau Download disini

===============================================

2. MAXTRON V13+ ( Gambar dibawah)

A. BYPASS FRP ONLY ukuran PAC 1 MB

ONLY SC7731C

  1. Download Firmware PAC SC7731C_Maxtron_V13+_V3.0_20171205_BYPASS_FRP_ONLY  atau  Download Disini (1MB)

B. Firmware PAC FULL

  1. Download SC7731C_Maxtron_V13+_V3.0_20171205 atau Download disini

===============================================

Tool :

  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

  • Untuk FRP Maxtron V13 tinggal pake PAC BYPASS FRP ONLY, tinggal load PAC file, flash, 5dtk done
  • Boot volume (+/-)
  •  Sinyal Aman

Cara Bypass Maxtron V13  via Research Download

Log Read Flash Maxtron V13

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
====  Wait for phone…
Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
lashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731c_c7367_fwvga_oversea
Model Brand : S50H
Model Device: sp7731c_c7367_fwvga
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : MAXTRON_V13_V04_20170824
Model Ext   : MAXTRON_V13
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : sysinfo.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1553 MiB
Saved to : D:\maxtron\Maxtron V13\SP7731CEB_sp7731c_c7367_fwvga_6.0_MAXTRON_V13_V04_20170824_MAXTRON_V13\
Done!

syarat-dan-ketentuan

 

Firmware BellPhone BP268

godsaveusnow bellphone, FIRMWARE, FLASH, rom , , , , ,

Brand     : alps

ProdName  : full_keytak6580_weg_l

ProdModel : BP268

Device    : keytak6580_weg_l

AndroidVer: 6.0

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

Bahan :

1. Download Firmware Full

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini

3. Driver bila belum punya instal dulu driver mtknya

4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

  • Bellphone BP268 MTK versi Lain Download Di bawah
  1. MT6580__alps__BP268__er241c_m05_20170829_2017

Cara Flash Bellphone BP628 via Flash Tool

Untitled

Log Read Firmware BellPhone BP268

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473C346F0EC15151
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473C346F0EC15151
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD7AD1AE2CE3514D83B7F3DA9F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1382 MiB
Scatter saved to : D:\ANDROID LAIN2\Bellphone\BP268\MT6580__alps__BP268__keytak6580_weg_l__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24\

All done!

syarat-dan-ketentuan

Flash Asus X009DA Dead via 9008 ~ CM2

godsaveusnow 9008, ASUS, FIRMWARE, rom , , , , , , , , ,

Device Brand    : asus

Device Manufact.: asus

Device Model    : msm8916_32

Device CPU      : MSM8916

Device IntName  : WW_Phone

Device Version  : 6.0.1

CU_SWVer        : asus_x009da

Device Compile  : 3/29/2017 10:02:02 AM

Fix Asus X009DA matot via 9008, tool wajib pake CM2.

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Asus X009DA HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Flash Asus X009DA via dongle CM2

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 09F6ED7C
ID_BLOCK_L : 4B05FC6FC932A2372DC731FBDB7B5FDD
ID_BLOCK_L : 238EEACE428CCE9EE75A26A3FF8B1F7B
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : asus
ProdName  : WW_Phone
Device    : msm8916_32
AndroidVer: 6.0.1
Manufact. : asus
QLMxCPU   : MSM8916
Asus X009DA
DevInfo : MSM8916__asus__asus__ANDR_v6.0.1__msm8916_32__WW_Phone

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : fs_gc.img
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : asuskey.bin
[Read Ok] : asuskey2.bin
[Read Ok] : asuskey3.bin
[Read Ok] : asuskey4.bin
[Read Ok] : asuskey5.bin
[Read Ok] : asusfw.bin
[Read Ok] : asdf.bin
[Read Ok] : apd.bin
[Read Ok] : adf.bin
[Read Ok] : cache.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2112 MiB

Done!

syarat-dan-ketentuan

Repair Asus Z00UD / ZD551KL Matot 9008

godsaveusnow Tak Berkategori , , , , , , , , , , ,

Brand     : asus
ProdName  : WW_Z00T
ProdModel : ASUS_Z00TD
Device    : Z00T
AndroidVer: 5.0.2
Manufact. : asus
QLMxCPU   : MSM8916

DevInfo : MSM8916__asus__asus__ANDR_v5.0.2__ASUS_Z00TD__Z00T__WW_Z00T
Detek di UFI ma CM2 Z00UD = Z00T /Z00TD

Fix Asus Z00UD matot via 9008 bukan Fastboot Mode

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Flash Via UFI Asus Z00UD / ZD551KL HS-9008  atau Download Disini
  2.       Download Rom Flash Via CM2 Asus Z00UD / ZD551KL HS-9008  atau Download Disini
  3.       Tool tested via UFI sama CM2
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Kerja
1. Cara EDL/9008 Silahkan testpoint Asus Z00UD anda, letak test point seperti gambar diatas, baterai tetap dipasang
2. Flash via UFI atau CM2 dongle
3. Buat ROM UFI karena tanpa userdata, bila belum bisa masuk menu silahkan reset abis flash

Penampakan ROM 9008 asus Z00UD

Log Read Firmware ASUS Z00UD via UFI
Scanning for Qualcomm HS-USB QDLoader 9008 device…
Download Port: Qualcomm HS-USB QDLoader 9008 (COM3)
 Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
 USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.2, date: 3-25-2016
Initializing…

platform: msm8916, cpu abi: arm64-v8a
manufacturer: asus
board: msm8916, name: WW_Z00T
brand: asus, model: ASUS_Z00TD
build id: LRX22G, version: 5.0.2 Lollipop (LRX22G.WW_user_1.15.40.1238_20160305)
build description: Z00T-user 5.0.2 LRX22G WW_user_1.15.40.1238_20160305 release-keys

Reading gpt_main0 at 0x00000000-0x000043FF size: 17 KiB…  Done.
Reading sbl1 at 0x00004400-0x001443FF size: 1.25 MiB…  Done.
Reading sbl1bak at 0x00144400-0x002843FF size: 1.25 MiB…  Skipped
Reading rpm at 0x00284400-0x003043FF size: 512 KiB…  Done.
Reading rpmbak at 0x00304400-0x003843FF size: 512 KiB…  Skipped
Reading tz at 0x00384400-0x004043FF size: 512 KiB…  Done.
Reading tzbak at 0x00404400-0x004843FF size: 512 KiB…  Skipped
Reading hyp at 0x00484400-0x005043FF size: 512 KiB…  Done.
Reading hypbak at 0x00504400-0x005843FF size: 512 KiB…  Skipped
Reading DDR at 0x00584400-0x0058C3FF size: 32 KiB…  Done.
Reading ssd at 0x0058C400-0x0058E3FF size: 8 KiB…  Done.
Reading sec at 0x0058E400-0x005923FF size: 16 KiB…  Done.
Reading aboot at 0x00592400-0x00A923FF size: 5 MiB…  Done.
Reading abootbak at 0x01000000-0x014FFFFF size: 5 MiB…  Skipped
Reading splash at 0x01500000-0x019FFFFF size: 5 MiB…  Done.
Reading devinfo at 0x01A00000-0x01AFFFFF size: 1 MiB…  Done.
Reading fsg at 0x02000000-0x0217FFFF size: 1.50 MiB…  Done.
Reading fsc at 0x02180000-0x021803FF size: 1 KiB…  Done.
Reading modemst1 at 0x02180400-0x023003FF size: 1.50 MiB…  Done.
Reading modemst2 at 0x02300400-0x024803FF size: 1.50 MiB…  Done.
Reading factory at 0x02480400-0x02E803FF size: 10 MiB…  Done.
Reading factorybak at 0x02E80400-0x038803FF size: 10 MiB…  Done.
Reading asuskey at 0x03880400-0x039803FF size: 1 MiB…  Done.
Reading asuskey2 at 0x03980400-0x03A803FF size: 1 MiB…  Done.
Reading asuskey3 at 0x03A80400-0x03B803FF size: 1 MiB…  Done.
Reading asuskey4 at 0x03B80400-0x03C803FF size: 1 MiB…  Done.
Reading asuskey5 at 0x03C80400-0x03D803FF size: 1 MiB…  Done.
Reading asusgpt at 0x03D80400-0x03E803FF size: 1 MiB…  Done.
Reading asusgpt1 at 0x03E80400-0x03F803FF size: 1 MiB…  Done.
Reading asusgpt2 at 0x03F80400-0x040803FF size: 1 MiB…  Done.
Reading misc at 0x04080400-0x041803FF size: 1 MiB…  Done.
Reading keystore at 0x04180400-0x042003FF size: 512 KiB…  Done.
Reading config at 0x04200400-0x042083FF size: 32 KiB…  Done.
Reading asdf at 0x04208400-0x062083FF size: 32 MiB…  Done.
Reading abootdebug at 0x06208400-0x064083FF size: 2 MiB…  Done.
Reading persistent at 0x06408400-0x065083FF size: 1 MiB…  Done.
Reading oem at 0x07000000-0x08FFFFFF size: 32 MiB…  Done.
Reading boot at 0x09000000-0x0AFFFFFF size: 32 MiB…  Done.
Reading recovery at 0x0B000000-0x0CFFFFFF size: 32 MiB…  Done.
Reading persist at 0x0D000000-0x0EFFFFFF size: 32 MiB…  Done.
Reading asusfw at 0x0F000000-0x0FFFFFFF size: 16 MiB…  Done.
Reading modem at 0x10000000-0x13FFFFFF size: 64 MiB…  Done.
Reading ADF at 0x14000000-0x15FFFFFF size: 32 MiB…  Done.
Reading APD at 0x16000000-0x22FFFFFF size: 208 MiB…  Done.
Reading cache at 0x23000000-0x24FFFFFF size: 32 MiB…  Done.
Reading system at 0x25000000-0xE4FFFFFF size: 3 GiB…  Done.
Files saved to \\%BACKUPS%\ASUS\ASUS_Z00UD(ZD551KL)\Z00T-user%205.0.2%20LRX22G%20WW_user_1.15.40.1238_20160305%20release-keys\

Log Flash Asus Z00UD mode 9008 via CM2

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 0563791F
ID_BLOCK_E : 11112222
ID_BLOCK_L : 9804CD17002B1797819FA1BA47D9326D
ID_BLOCK_L : 58A3C03C622893406757A59F4E44AF42
Pickup loader from firmware package
Loader Sent! Initializing …
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Flash Chain : 48
Flashing now

Flashing : gpt_main0.bin
Flashing : sbl1.mbn
Flashing : sbl1.mbn
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : sec.dat
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : splash.img
Flashing : misc.img
Flashing : asdf.bin
Flashing : abootdebug.bin
Flashing : boot.img
Flashing : recovery.img
Flashing : persist.img
Flashing : NON-HLOS.bin
Flashing : cache.img
Flashing : system.img
Flashing : userdata.img
Flashing : gpt_backup0.bin
Wipe data …

BootConfig set to 0x00

Flashing done!

Done!
Elapsed: 00:04:50

Reconnect Power/Cable!

Fix Asus X009DA Dead via 9008 ~ CM2

godsaveusnow Tak Berkategori , , , , , , , , ,

Device Brand    : asus
Device Manufact.: asus
Device Model    : msm8916_32
Device CPU      : MSM8916
Device IntName  : WW_Phone
Device Version  : 6.0.1
CU_SWVer        : asus_x009da
Device Compile  : 3/29/2017 10:02:02 AM

Fix Asus X009DA matot via 9008, tool wajib pake CM2.

Bahan :

  • via EDL 9008 / CM2
  1.       Download Rom Asus X009DA HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2 
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl
  4.       Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN     YANG DI ISI) , Mahar pulsa 10k

Cara Flash Asus X009DA via dongle CM2


Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
ID_BLOCK_I : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 09F6ED7C
ID_BLOCK_L : 4B05FC6FC932A2372DC731FBDB7B5FDD
ID_BLOCK_L : 238EEACE428CCE9EE75A26A3FF8B1F7B
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : asus
ProdName  : WW_Phone
Device    : msm8916_32
AndroidVer: 6.0.1
Manufact. : asus
QLMxCPU   : MSM8916
Asus X009DA
DevInfo : MSM8916__asus__asus__ANDR_v6.0.1__msm8916_32__WW_Phone

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : fs_gc.img
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : asuskey.bin
[Read Ok] : asuskey2.bin
[Read Ok] : asuskey3.bin
[Read Ok] : asuskey4.bin
[Read Ok] : asuskey5.bin
[Read Ok] : asusfw.bin
[Read Ok] : asdf.bin
[Read Ok] : apd.bin
[Read Ok] : adf.bin
[Read Ok] : cache.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 2112 MiB

Done!

Flash Coolpad E560 via Fastboot & HS-9008 (MATOT)

godsaveusnow Tak Berkategori , , , , , , , , , ,

COOLPAD E560
Brand     : Coolpad
ProdName  : cpkmini_g00
ProdModel : Coolpad E560
Device    : cpkmini_g00
AndroidVer: 5.1.1
Manufact. : Coolpad
QLMxCPU   : MSM8916

Bahan :

  • via Fastboot :
  1.      Download Fastboot Rom Coolpad E560  atau Download Disini
  2.      Download Tool dan Driver Coolpad E560 atau Download Disini (PASS YGDP : 369)
  3.      Untuk tutorial flash  bisa dilihat video dibawah
  • via EDL 9008 / CM2
  1.       Download Rom Coolpad E560 HS-9008  atau Download Disini
  2.       Tool WAJIB menggunakan dongle CM2 
  3.       Cara kerja ikuti petunjuk CM2, boot volume up+down, kabel edl

Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Cara Kerja :

1.    Matikan Coolpad E560 anda
2.    Tekan Volume up terus colok kabel USB, sehingga tampil seperti gambar dibawah

3.    Tekan Tobol Volume Up lagi, dan muncul tulisan seperti gambar dibawah

4.    Install driver dan Tool Coolpad E560 yang ada diatas
5.    Buka YGDP dengan Password 369
6.    Selanjutnya anda bisa lihat video dibawah

Video cara flash Coolpad E560

Log Read Firmware Coolpad E560
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 410 [MSM8916]
ID_BLOCK_S : 0E813F4C
ID_BLOCK_I : 007050E1
ID_BLOCK_E : 00480000
ID_BLOCK_L : 98598B2F8FB813FB7CAE5AAE6B163EC4
ID_BLOCK_L : FA3D8AA8BB21D8D8AA2C7512E1C79892
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000001D2000000 [ eMMC 8 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : Coolpad
ProdName  : cpkmini_g00
ProdModel : Coolpad E560
Device    : cpkmini_g00
AndroidVer: 5.1.1
Manufact. : Coolpad
QLMxCPU   : MSM8916

DevInfo : MSM8916__Coolpad__Coolpad__ANDR_v5.1.1__Coolpad_E560__cpkmini_g00__cpkmini_g00

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : param.cfg
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : oem.img
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8916 / eMMC
Firmware Size : 1349 MiB
Done!

FLASH OPPO ALL TYPE via MMC SD CARD

godsaveusnow Tak Berkategori , , , , , , , , , , ,

STANDART AJA GAN, FLASH OPPO ALL TYPE via MMC SD CARD, ATAU VIA RECOVERY.
OPPO N3, OPPO R5, OPPO N1, OPPO N1 MINI, OPPO FIND 7, OPPO FIND 7A, OPPO NEO 5, OPPO FIND 5 MINI, OPPO R1 R829,OPPO NE0 3, OPPO NEO, OPPO YOYO, OPPO JOY PLUS, OPPO JOY 3, OPPO R1X, OPPO JOY,  OPPO FIND WAY S, OPPO FIND WAY, OPPO FIND 5, OPPO MUSE, OPPO MIRROR, OPPO R7 LITE, OPPO R7 PLUS, OPPO NEO7, OPPO MIRROR 5, OPPO R7S

NO PASSWORD

OPPO N3, OPPO R5, OPPO N1, OPPO N1 MINI, OPPO FIND 7, OPPO FIND 7A, OPPO NEO 5, OPPO FIND 5 MINI, OPPO R1 R829,OPPO NE0 3, OPPO NEO, OPPO YOYO, OPPO JOY PLUS, OPPO JOY 3, OPPO R1X, OPPO JOY,  OPPO FIND WAY S, OPPO FIND WAY, OPPO FIND 5, OPPO MUSE, OPPO MIRROR, OPPO R7 LITE, OPPO R7 PLUS, OPPO NEO7, OPPO MIRROR 5, OPPO R7S
Caranya :

  1. Masuk recovery Vol down + on
  2. Pilih bahasa
  3. Pilih FROM SD CARD
  4. Cari filenya
  5. Done trus restart

LIST FIRMWARE UPDATE SD CARD
DOWNLOAD via MEDIAFIRE

  1. OPPO N3 N5206EX_11.A.12_OTA_INT_012_all_151010
  2. OPPO R5 R8106EX_11.A.15_OTA_INT_015_all_150627
  3. OPPO N1 N1_12.A.13_OTA_INT_013_all_svn5986
  4. OPPO N1 MINI N1mini_11_A.11_INT_150322_OTA_011_all
  5. OPPO FIND 7  FIND7WX_12_OTA_INT_014_all_svn10682
  6. OPPO FIND 7A FIND7WX_12_OTA_INT_014_all_svn10682
  7. OPPO NEO 5 1201EX_11.A.11_OTA_INT_011_all_151020
  8. OPPO FIND 5 MINI R827_11.A.15_OTA_INT_015_all_151111
  9. OPPO R1 R829_11.A.12_OTA_INT_012_all_151016
  10. OPPO NE0 3 R831K_11.A.17_OTA_INT_017_all_151229 
  11. OPPO NEO R831_11.A.10_OTA_INT_010_all_140828
  12. OPPO YOYO R2001_11.A.14_OTA_INT_014_all_151016
  13. OPPO JOY PLUS R1011EX_11_A.07_OTA_INT_007_all_150918_logo
  14. OPPO JOY 3 A11wEX_11.A.07_OTA_INT_007_all_151214
  15. OPPO R1X R1xEX_11.A.05_OTA_INT_005_all_150706
  16. OPPO JOY R1001_11.A.16_OTA_INT_016_all_151103
  17. OPPO FIND WAY S U707_11.A.03_OTA_INT_003_all_131017_wipe
  18. OPPO FIND WAY U7015_11_Int_4.03_En_130525_update
  19. OPPO FIND 5 X909AS_12.A.11_OTA_INT_011_all_svn3793_wipe
  20. OPPO MUSE R821_11.A.12_OTA_INT_012_all_151104_wipe
  21. OPPO MIRROR R819AS_11.A.09_OTA_INT_009_all_131010_wipe
  22. OPPO MIRROR 3  Mirror3EX_11.A.09_OTA_INT_009_all_150505
  23. OPPO R7 LITE R7kfEX_11_OTA_008_all_201511111731
  24. OPPO R7 PLUS R7plusfEX_11_OTA_012_all_201512251816
  25. OPPO NEO7 A33wEX_11_OTA_006_all_201512102214
  26. OPPO MIRROR 5 Mirror5EX_11_OTA_011_all_201512101105
  27. OPPO R7S R7sfEX_11_OTA_006_all_201512101004

  

    MOGA BERKAH BAGI KITA, AMIN…

    REPAIR LENOVO A706 Qualcomm HS-USB QDLoader 9008

    godsaveusnow Tak Berkategori , , , , , ,

    REPAIR LENOVO A706 TERDETEK HS-USB 9008

    PASS : kangsuper.blogspot.co.id

    1. TOOL PAKE QPST (Saya pake QPST2.7.422)
    2. FIRMWARENYA DOWNLOAD DISINI

    CARA PERHATIKAN GAMBAR

     QPST eMMC software download

    NOTE :
    – Saya Pernah punya A706 yg terdetek 9006 malah gak bisa, kmdian saya flash RAW pake ROADKILL disk image, man ambil file boot kemudian recovery, saya write-kan satu per satu, terus kedetek 9008, terus saya flash pake QPST eMMC software download. malah langsung done.

    – Setelah klik download PROSES SAMPAI KELUAR BAR PROGRESS 2-3MNT KAYAK HANG, ditunggu aja

    BUAT YG SUDAH SUKSES KIRIM PULSA KE

    INDOSAT= 0856-0140-2081
    atau
    3 = 0896-1384-0593

    PULSA 5K ATAU 10K DITERIMA

    MAAF YG GAK NIAT MAU KIRIM PULSA JGN DOWNLOAD CARI YG LAIN AJA, NTAR GAK BERKAH, DISINI SAYA CARI UANG/KERJA, BUKAN MENGEMIS. THX