Cara Flash AXIOO AX7 S5T via Research Download

Model Name  : Axioo_AX7

Model Brand : Axioo

Model Device: Axioo_AX7

AndrVersion : 6.0

BaseBand CPU: SP9832A_2H11_VOLTE

Project Ver : Axioo_S5T_GSC0_SW20171108

Model Ext   : Axioo_AX7

Tool & Bahan :

  1. Download Firmware PAC Axioo AX7 S5T Tablet atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (+-)

Cara Flash AXIOO AX7 S5T via Research Download

Log Read Firmware Axioo S5T

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX7
Model Brand : Axioo
Model Device: Axioo_AX7
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_S5T_GSC0_SW20171108
Model Ext   : Axioo_AX7

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_600x1024.bin
[Read Ok] : fblogo_600x1024.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2102 MiB
Saved to : D:\axioo\axioo s5t\stock rom axioo s5t\SP9832A_2H11_VOLTE_Axioo_AX7_6.0_Axioo_S5T_GSC0_SW20171108_Axioo_AX7\
Done!

912ac-syarat2bdan2bketentuan

 

Firmware Lava Iris 65 mt6739

Patch Level    : O11019

Display ID     : LAVA_iris65_1_8_S103_IDR_18F08

Ver. CodeName  : REL

Ver. Release   : 8.1.0

Sec. Patch     : 2018-02-05

Build Time     : 1528390260

Product Model  : iris65

Product Brand  : LAVA

Product Name   : iris65

Product Device : iris65

Product Manfct : LAVA

Product Info   : iris65

Board Platform : mt6739

1. Download Firmware Full

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini 51804

3. Driver bila belum punya instal dulu driver mtknya

4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

  • Firmware Lava Iris 65 versi Lain Download Di bawah

Cara Flash  Lava Iris 65 via Flash Tool

Log Read

Created by Infinity-Box (c) 2018
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : O11019
Display ID     : LAVA_iris65_1_8_S103_IDR_18F08
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-02-05
Build Time     : 1528390260
Product Model  : iris65
Product Brand  : LAVA
Product Name   : iris65
Product Device : iris65
Product Manfct : LAVA
Product Info   : iris65
Board Platform : mt6739

Operation : Write Flash [ v2.00 r2 ]

Repartition  : Disabled
Flash Verify : Disabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :17
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : odmdtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x45A5B384 [ 1.09 GB ]

Operation : Write Security [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: 150100464E36324D42038E0E9A2DB467
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FN62MB
EMMC:
BOOT1  : 0x00400000 [ 4.00 MB ]
BOOT2  : 0x00400000 [ 4.00 MB ]
RPMB   : 0x00080000 [ 512.00 KB ]
USER   : 0x1D2000000 [ 7.28 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : E4C702329E5BA1FB78E42E87D60F534F

DA : USB : HIGH-SPEED

Boot done!

 

Firmware Lava Iris 65 via Flashtool

Patch Level    : O11019

Display ID     : LAVA_iris65_1_8_S103_IDR_18F08

Ver. CodeName  : REL

Ver. Release   : 8.1.0

Sec. Patch     : 2018-02-05

Build Time     : 1528390260

Product Model  : iris65

Product Brand  : LAVA

Product Name   : iris65

Product Device : iris65

Product Manfct : LAVA

Product Info   : iris65

Board Platform : mt6739

1. Download Firmware Full

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini 51804

3. Driver bila belum punya instal dulu driver mtknya

4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

  • Firmware Lava Iris 65 versi Lain Download Di bawah

Cara Flash  Lava Iris 65 via Flash Tool


Log Read

Created by Infinity-Box (c) 2018
Chinese Miracle II : MediaTek Service Module
Device Info file   : _Android_info.txt

Patch Level    : O11019
Display ID     : LAVA_iris65_1_8_S103_IDR_18F08
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-02-05
Build Time     : 1528390260
Product Model  : iris65
Product Brand  : LAVA
Product Name   : iris65
Product Device : iris65
Product Manfct : LAVA
Product Info   : iris65
Board Platform : mt6739

Operation : Write Flash [ v2.00 r2 ]

Repartition  : Disabled
Flash Verify : Disabled
Pre-Erase    : Enabled
Verify HW/SW : Enabled
XData Backup : Disabled

Files :17
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : odmdtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x45A5B384 [ 1.09 GB ]

Operation : Write Security [ v2.00 r2 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x40000000 [ 1.00 GB ]

EMMC: 150100464E36324D42038E0E9A2DB467
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FN62MB
EMMC:
BOOT1  : 0x00400000 [ 4.00 MB ]
BOOT2  : 0x00400000 [ 4.00 MB ]
RPMB   : 0x00080000 [ 512.00 KB ]
USER   : 0x1D2000000 [ 7.28 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : E4C702329E5BA1FB78E42E87D60F534F

DA : USB : HIGH-SPEED

Boot done!

23456-syarat2bdan2bketentuan

Firmware & Bypass FRP Advan S7D E1C NXT

BYPASS FRP Advan S7D E1C NXT  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

platform: MT6580, cpu abi: armeabi-v7a

manufacturer: ADVAN

board: S7D, name: ADVAN_E1C_NXT

brand: ADVAN, model: S7D

build id: NRD90M, version: 7.0 Nougat (E1C_NXT_GW7009_V5.0_20171215)

build description: full_advan8321_7009-user 7.0 NRD90M 1513648960 release-keys

Bahan :

1. Download  Firmware Advan S7D E1C NXT

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

1. Buat remove FRP verifikasi akun google  Advan S7D E1C NXT, hanya centang pada tab FRP, silahkan lihat video dibawah

2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Bypass FRP Only Advan S7D E1C NXT

Log Read Firmware Advan S7D E1C NXT

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 17 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E36324D4203FDADF2F0A4E1
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26N
[eMMC] : FLASH_CID : 150100464E36324D4203FDADF2F0A4E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD19C56D823D19DD59BB3F9172
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ADVAN
ProdName  : ADVAN_E1C_NXT
ProdModel : S7D
Device    : ADVAN_E1C_NXT
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P31

[Read Ok] : preloader_advan8321_7009.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / advan8321_7009 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3014 MiB
Scatter saved to : E:\ADVAN\advan e1c nxt\MT6580__ADVAN__S7D__ADVAN_E1C_NXT__7.0__alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P31\

All done!

syarat-dan-ketentuan

 

Firmware & Flash Axioo PICOpad 7H2 / PICOpad_S2L

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

Tool & Bahan :

  1. Download Firmware PAC AXIOO PICOPAD 7H2 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash AXIOO PICOPAD 7H2 via Research Download

Log Read Info AXIOO PICOPAD 7H2
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 5 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:12 

Flash & Firmware Bellphone BP 268

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

Bahan :

1. Download Firmware Full

2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

  • Bellphone BP268 MTK versi Lain Download Di bawah
  1. MT6580__alps__BP268__er241c_m05_20170829_2017
  2.  

Cara Flash Bellphone BP628 via Flash Tool

Log Read Firmware BellPhone BP268
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034473C346F0EC15151
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034473C346F0EC15151
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0xFCC4CFBD7AD1AE2CE3514D83B7F3DA9F
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : alps
ProdName  : full_keytak6580_weg_l
ProdModel : BP268
Device    : keytak6580_weg_l
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24

[Read Ok] : preloader_keytak6580_weg_l.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / keytak6580_weg_l / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1382 MiB
Scatter saved to : D:\ANDROID LAIN2\Bellphone\BP268\MT6580__alps__BP268__keytak6580_weg_l__6.0__ALPS.L1.MP6.V2_KEYTAK6580.WEG.L_P24\

All done!

Flash & Firmware Maxtron V15 SPD

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash Maxtron V15 via Research Download

Log Read Firmware Maxtron V15 
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

Flash & Firmware Strawberry ST7701 SPD

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

Tool & Bahan :

  1. Download Firmware PAC Strawberry ST 7701 FS066_CF8_LS019_ST7701_L12819_16B  atau Download Disini
  2. Download Firmware PAC Strawberry ST 7701  SP7731GEA_HDR_ST7701_6.0_LS019_INDB_V02 atau Download Disini
  3. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4. Tutorial Flash via research here
  5. Driver SPD by InfinityBox
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume +-

Cara Flash Strawberry ST7701 via Research Download

Log Read Firmware Strawberry ST7701
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 14 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731g_1h10_hd_oversea
Model Brand : ST7701
Model Device: ST7701
AndrVersion : 6.0
BaseBand CPU: SP7731GEA_HDR
Project Ver : FS066_CF8_LS019_ST7701_L12819_16B
Model Ext   : ST7701

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_720x1280.bin
[Read Ok] : fblogo_720x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1555 MiB
Saved to : E:\STRAWBERRY\New folder\SP7731GEA_HDR_ST7701_6.0_FS066_CF8_LS019_ST7701_L12819_16B_ST7701\
Done!

Flash Xiaomi NOTE 1W 4G 2014022 MT6582

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.5
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.JB5.MP.V1.13

Bahan :
1. Download  Firmware Xiaomi Note 1W 2014022 atau Download Disini
2. Download SP-Flash-Tool Wajib pake versi ini Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Xiaomi NOTE 1W 4G  via Flash Tool

Log Read Firmware Xiaomi NOTE 1W 4G 2014022
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 6 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 110100303034474530019BD2C17FC115
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 0EG40
[eMMC] : FLASH_CID : 110100303034474530019BD2C17FC115
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 796C7A55045FDA1DA528F69DD1E897D6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Xiaomi
ProdName  : lcsh92_wet_jb9
ProdModel : HM NOTE 1W
Device    : lcsh92_wet_jb9
AndroidVer: 4.4.5
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.JB5.MP.V1.13

[Read Ok] : preloader_fars82_wet_v113_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / fars82_wet_v113_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 808 MiB
Scatter saved to : E:\andro3\xiaomi\2014022\New folder (3)\MT6592__Xiaomi__HM_NOTE_1W__lcsh92_wet_jb9__4.4.5__ALPS.JB5.MP.V1.13\

All done!

Flash & Bypass FRP Advan S7D E1C NXT

BYPASS FRP Advan S7D E1C NXT  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

platform: MT6580, cpu abi: armeabi-v7a
manufacturer: ADVAN
board: S7D, name: ADVAN_E1C_NXT
brand: ADVAN, model: S7D
build id: NRD90M, version: 7.0 Nougat (E1C_NXT_GW7009_V5.0_20171215)
build description: full_advan8321_7009-user 7.0 NRD90M 1513648960 release-keys

Bahan :
1. Download  Firmware Advan S7D E1C NXT

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini
4. Driver bila belum punya instal dulu driver mtknya
5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Buat remove FRP verifikasi akun google  Advan S7D E1C NXT, hanya centang pada tab FRP, silahkan lihat video dibawah
2. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Bypass FRP Only Advan S7D E1C NXT

Log Read Firmware Advan S7D E1C NXT
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 17 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E36324D4203FDADF2F0A4E1
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM26N
[eMMC] : FLASH_CID : 150100464E36324D4203FDADF2F0A4E1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD19C56D823D19DD59BB3F9172
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ADVAN
ProdName  : ADVAN_E1C_NXT
ProdModel : S7D
Device    : ADVAN_E1C_NXT
AndroidVer: 7.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P31

[Read Ok] : preloader_advan8321_7009.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / advan8321_7009 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 3014 MiB
Scatter saved to : E:\ADVAN\advan e1c nxt\MT6580__ADVAN__S7D__ADVAN_E1C_NXT__7.0__alps-mp-n0.mp2-V1.23.1_miki8321.tb.n_P31\

All done!