Flash PHICOMM C230 via 9008 & SDCARD

Brand     : PHICOMM
ProdName  : msm8610
ProdModel : PHICOMM CLUE C230
Device    : msm8610
AndroidVer: 4.3
Manufact. : PHICOMM
QLMxCPU   : MSM8610

DevInfo : MSM8610__PHICOMM__PHICOMM__ANDR_v4.3__PHICOMM_CLUE_C230__msm8610__msm8610

Tool Flash wajib mengunakan CM2

Bahan :
1. Download Firmware PHICOMM 230 atau Download Disini
2. Tool wajib Infinity CM2, BOOT VOLUME UP + DOWN
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash PHICOMM C230 via SDCARD
1. Download Update.zip PHICOMM C230 atau Download Disini
2. Masuk recovery, volume (-)
3. Pilih Update from external storage
4. Tunggu sampe done
5. Reset factory
6. Restrart & done

Cara Flash PHICOMM C230 via CM2

Log Read Firmware PHICOMM C230
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 0478EEBF
ID_BLOCK_I : 008110E1
ID_BLOCK_L : C43C56A00F9B80837CD1232CEBB63E0E
ID_BLOCK_L : 5322EC3F30A30B983DF8DD0A189781CA
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000000
Boot Ok!

Brand     : PHICOMM
ProdName  : msm8610
ProdModel : PHICOMM CLUE C230
Device    : msm8610
AndroidVer: 4.3
Manufact. : PHICOMM
QLMxCPU   : MSM8610

DevInfo : MSM8610__PHICOMM__PHICOMM__ANDR_v4.3__PHICOMM_CLUE_C230__msm8610__msm8610

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : usbdisk.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 1991 MiB

Flash Hisense HS-L695 via Mode HS 9008

Hisense HS-L695 PureShot Plus
Brand     : Hisense
ProdName  : L695
ProdModel : HS-L695
Device    : L695
AndroidVer: 5.0.2
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1117.6.04.02.ID00

DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.0.2__HS-L695__L695__L695__L1117.6.04.02.ID00

Tool Flash wajib mengunakan CM2

Bahan :
1. Download Firmware Hisense HS-L695 atau Download Disini
2. Tool wajib Infinity CM2
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Hisense HS-L695 via CM2

Log Read Firmware Hisense HS-L695
Operation : Read Flash [ v1.15 ]
1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!
Wait for phone…
Device not found!
Check cable, connection and drivers!
Reconnect Power/Cable!
Operation : Read Flash [ v1.15 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 00CE56A1
ID_BLOCK_I : 0091B0E1
ID_BLOCK_L : 26DEB442ED7966615E33DDC20D54DCEC
ID_BLOCK_L : 85F846E9EA75E56E635207FCF6393714
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8929 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000/00000200
Boot Ok!

Brand     : Hisense
ProdName  : L695
ProdModel : HS-L695
Device    : L695
AndroidVer: 5.0.2
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1117.6.04.02.ID00

DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.0.2__HS-L695__L695__L695__L1117.6.04.02.ID00

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : diag.bin
[Read Ok] : lsplash.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8929 / eMMC
Firmware Size : 2584 MiB

Done!

Flash Infinix X553 / HOT 3 LTE via Mode HS 9008

QLMxPRJ   : X553-W82918A1-L-160913V4
DevInfo : MSM89xx__X553-W82918A1-L-160913V4

Note : Hanya buat Infinix X553 16+2 A1

Tool Flash wajib mengunakan CM2 atau Unitool/volcano

Bahan :
1. Download Firmware Infinix X553 16+2 A1 atau Download Disini
2. Tool wajib Infinity CM2 atau Unitool/volcano
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Infinix X553 via CM2

Log Read Firmware Infinix X553
Operation : Read Flash [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 04CDE887
ID_BLOCK_I : 0091B0E1
ID_BLOCK_L : 1CE49E78D743487B2419FBE4237EF6D6
ID_BLOCK_L : 84FF41E8ED74E66F624D06FFF5383615
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8929 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!
QLMxPRJ   : X553-W82918A1-L-160913V4
DevInfo : MSM89xx__X553-W82918A1-L-160913V4

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : splash.img
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8929 / eMMC
Firmware Size : 2015 MiB

Done!

Flash Aldo AS8 SC7731 via CM2

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : AS8
Device Model   : scx35_sp7731gea_ts18_kechao_8p8
Device CPU     : sp7731gea
Device IntName : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Device Version : 4.4.2
Device Compile : 9/12/2015 10:44:51 AM
Device Project : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Device ExtInfo : AS8

Mohon diperhatikan : Firmware ini hanya untuk ALDO_AS8_V07

Tool Flash menggunakan Infinity CM2

Bahan :
1. Dongle Infinity CM2
2. Firmware ALDO_AS8_V07 DOWNLOAD DISINI
3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

UNTUK PAC FILE SILAHKAN KE LINK DISINI

Log Read Firmware Aldo AS8 V.07
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Model Brand : AS8
Model Device: scx35_sp7731gea_ts18_kechao_8p8
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Model Ext   : AS8

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.46_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 979 MiB
Saved to : G:\andro3\aldo\AS8\SP7731GEA_scx35_sp7731gea_ts18_kechao_8p8_4.4.2_7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14_AS8\
Done!

Flash Polytron R2406 SC7731

Model Name  : P1923_PT
Model Brand : Spreadtrum
Model Device: P1923
AndrVersion : 4.4.2
BaseBand CPU: P1923
Project Ver : POLYTRON_R2406_1300C_V1.0.8_20150918
Model Ext   : POLYTRON_R2406

Bahan :
1. Download Firmware PAC Polytron R2406

2. Download Firmware Polytron R2406 via Infinity CM2 DOWNLOAD DISINI
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Tutorial Flash via research here
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Polytron R2406 via Research Download

Log Read Firmware Polytron R2406
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : P1923_PT
Model Brand : Spreadtrum
Model Device: P1923
AndrVersion : 4.4.2
BaseBand CPU: P1923
Project Ver : POLYTRON_R2406_1300C_V1.0.8_20150918
Model Ext   : POLYTRON_R2406

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 838 MiB
Saved to : F:\andro3\POLYTRON\r2406\P1923_P1923_4.4.2_POLYTRON_R2406_1300C_V1.0.8_20150918_POLYTRON_R2406\
Done!

Flash Aldo AS 8 SC7731

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : AS8
Device Model   : scx35_sp7731gea_ts18_kechao_8p8
Device CPU     : sp7731gea
Device IntName : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Device Version : 4.4.2
Device Compile : 9/12/2015 10:44:51 AM
Device Project : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Device ExtInfo : AS8

Mohon diperhatikan : Firmware ini disesuaikan versinya, versi lain dibawah

Bahan :
1. Firmware PAC ALDO_AS8_V07 DOWNLOAD DISINI
2. Firmware PAC ALDO_AS8_V07 New Pack DOWNLOAD DISINI
3. Firmware Infinity CM2 ALDO_AS8_V07 DOWNLOAD DISINI
4. Download Research Download R2.10
5. Driver SPD by InfinityBox
6. Turorial Flash via research here
7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

UNTUK ALDO AS8 VERSI YANG LAIN DOWNLOAD DIBAWAH

  1.  ALDO AS8 V03
  2.  ALDO AS8 V06
  3.  ALDO AS8 V14
  4.  ALDO AS8 V13
  5.  ALDO AS8 V12

NOTE :
-Versi harus sama
-Bila tdk yakin untuk versi yg mana, pada setting research download, anda bisa coba flash tanpa mencentang UBOOT_LOADER dan EraseUBOOT, atau centang saja system,  cache, dan userdata
-Untuk kasus phone lock silahkan centang userdata saja (fdl1&2 wajib centang)

Log Read Firmware Aldo AS8 V.07
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731geacuccspecAplus_UUI_ts18_kechao_aldo_as8_8p8_dt
Model Brand : AS8
Model Device: scx35_sp7731gea_ts18_kechao_8p8
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : 7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14
Model Ext   : AS8

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.46_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 979 MiB
Saved to : G:\andro3\aldo\AS8\SP7731GEA_scx35_sp7731gea_ts18_kechao_8p8_4.4.2_7731_TS18_8p8_850_1900_2100_ALDO_AS8_V07_2015_09_14_AS8\
Done!

SAMA DENGAN LINK DISINI

Flash Polytron R2506 WHITE & CYAN


Model Name  : great_a900f
Model Brand : POLYTRON
Model Device: great_a900f
AndrVersion : 4.4.2
BaseBand CPU: GREAT_A900F
Project Ver : Polytron_R2506_A900B_V03_2015.10.21
Model Ext   : POLYTRON R 2506

Bahan :
1. Download Firmware PAC Polytron R2506

2. Download Firmware Polytron R2506 via Infinity CM2 DOWNLOAD DISINI
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Log Read Fimware Polytron R2506
Operation : Read FullFlash [ v1.20 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : great_a900f
Model Brand : POLYTRON
Model Device: great_a900f
AndrVersion : 4.4.2
BaseBand CPU: GREAT_A900F
Project Ver : Polytron_R2506_A900B_V03_2015.10.21
Model Ext   : POLYTRON R2506

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 1140 MiB
Saved to : G:\andro3\POLYTRON\R2506 7731\GREAT_A900F_great_a900f_4.4.2_Polytron_R 2506_A900B_V03_2015.10.21_POLYTRON_R2506\kangsuper.blogspot.co.id
Done!

Elapsed: 00:05:30

Flash Mito A160 SC7731

Model Name  : scx35_sp7731geaplus_UUI_dt
Model Brand : MITO
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : MITO_A160_20150612_T05
Model Ext   : MITO_A160

Bahan :

1. Download Fimware PAC  Flash via Research Download MITO_A82

2. Firmware Mito A82 Flash via Infinity CM2 Download Disini
3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Mito A82 Research Download

Flash Via Infinity CM2

Tentang Mito A160

Log Read Firmware Mito A160
Operation : Read FullFlash [ v1.18 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731geaplus_UUI_dt
Model Brand : MITO
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : MITO_A160_20150612_T05
Model Ext   : MITO_A160

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 809 MiB
Saved to : G:\andro3\mito\mito a160 7731\SP7731GEA_scx35_sp7731gea_4.4.2_MITO_A160_20150612_T05_MITO_A160\
Done!

Elapsed: 00:06:00

Flash Mito A82 SC7715 / SC7731 / SC7731C

Sorry gak buat ss, keburu diambil.

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : Spreadtrum
Device Model   : scx15_sp7715ea
Device CPU     : scx15_sp7715ea
Device IntName : scx15_sp7715eaplus
Device Version : 4.4.2
Device Compile : 4/15/2015 2:49:22 AM
Device Project : KOT49H test-keys
Device ExtInfo : MITO_A82

Bahan :

1. Download Fimware PAC  MITO A82 SC7715

    2. Download Fimware PAC  MITO A82 SC7731

     3. Download Fimware PAC  MITO A82 SC7731C

    penampakan mito a82 sc7731c seperti dibawah

    4. Download Research Download R2.10
    5. Driver SPD by InfinityBox
    6. Turorial Flash via research here
    7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k, PASS SAMA SEMUA

    Error pada research download baca disini

    Flash Mito A82 Research Download

     

    Video Flash Mito A82 Via CM2

    Log Read Firmware Mito A82 SC7715
    Operation : Read FullFlash [ v1.16 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7715 eMMC loader v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Step #3 Passed!

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7715 eMMC loader v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : scx15_sp7715eaplus
    Model Brand : Spreadtrum
    Model Device: scx15_sp7715ea
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715EA
    Project Ver : KOT49H test-keys
    Model Ext   : MITO_A82

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : nvitem_w.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : sc7715_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : sc7715_modem_sc7715_cp2.bin
    [Read Ok] : logo_480x800.bin
    [Read Ok] : fblogo_480x800.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 686 MiB
    Saved to : G:\andro3\mito\mito a82 7715\SCX15_SP7715EA_scx15_sp7715ea_4.4.2_KOT49H_test-keys_MITO_A82\
    Done!

    Elapsed: 00:05:01

    Firmware Mito A660 SC7715

    Model Name  : scx15_sp7715ga_7675_project
    Model Brand : MITO
    Model Device: scx15_sp7715ga_7675
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715GA_7675
    Project Ver : MITO_A660_20150814_1634_T03
    Model Ext   : MITO A660

    Bahan:

    1. Download Fimware PAC  Research Download MITO_A660 Download Disini
    2. Firmware Mito A660 Infinity CM2 Download Disini
    3. Download Research Download R2.10
    4. Driver SPD by InfinityBox
    5. Turorial Flash via research here
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Error pada research download baca disini

    Flash Mito A660 menggunakan Research Download

    Log Read Flash Mito A660 via CM2

    Operation : Read FullFlash [ v1.14 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7715 Loader NAND v1.1 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected NAND Flash , Structure detect Ok!

    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
    [FW_READER] : Step #3 Passed!

    Model Name  : scx15_sp7715ga_7675_project
    Model Brand : MITO
    Model Device: scx15_sp7715ga_7675
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715GA_7675
    Project Ver : MITO_A660_20150814_1634_T03
    Model Ext   : MITO A660

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv_b256k.img
    [Read Ok] : nvitem_w.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : sc7715_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : CP2._CP2_WCN_14C_W15.18_Release.bin
    [Read Ok] : logo_320x480.bin
    [Read Ok] : fblogo_320x480.bin
    [Read Ok] : boot.img
    [Read Ok] : system_b256k.img
    [Read Ok] : cache_b256k.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata_b256k.img

    AndroidInfo created
    Firmware Size : 347 MiB
    Saved to : G:\InfinityBox\CM2SPD\Flash\mito t660\SCX15_SP7715GA_7675_[NAND_b256k]_scx15_sp7715ga_7675_4.4.2_MITO_A660_20150814_1634_T03_MITO_A660\
    Done!

    Elapsed: 00:07:25