Flash Sunberry S7 MT6572 Nand

Device Brand   : S7
Device Model   : S7
Device CPU     : MT6572
Device IntName : S7
Device Version : 4.4.2
Device Compile : 3/29/2017 6:35:06 AM
Device Project : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Device ExtInfo : S7
Note : Cek fisik, samakan dengan photo yang kami upload

Bahan :

  1. Download  Firmware FULL Sunberry S7 atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

-) Cara Flash Sunberry S7 via Flash Tool

Log Read Firmware Sunberry S7
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 00AD00BC00900055005400AD00BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x008B , [HYNIX] H9DA4VH2GJAMCR_4EM
[NAND] : FLASH_DIE : 00AD 00BC 0090 0055 0054 00AD 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 0xFCC4CFBD7459CAB2A42CEEEF5EC45E1B
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …
[Read Ok] : preloader_q3_m144_b18_gt019_s7world.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / q3_m144_b18_gt019_s7world / NAND
FW Size : 296 MiB

Brand     : S7
ProdName  : S7
ProdModel : S7
Device    : S7
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : Q3_HS_GT013_S7_V0.7_M44_B18_20170329
Android Info saved
Scatter saved to : D:\sunberry\s7\MT6572_NAND_S7__S7__S7__4.4.2__Q3_HS_GT013_S7_V0.7_M44_B18_20170329

Done!

Flash & Firmware Lava Iris 870

MTKxCPU: MT6735
ProdName: iris870
ProdModel: iris870
Device: iris870
AndroidVer: 6.0
Brand: Lava
MTKxPRJ: alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6
DisplayID: LAVA_iris870_INT_S120_17E04
BoardID: iris870
BuildDate: Thu May 11 10:00:44 CST 2017

Bahan :

  1.  Download  Firmware Scattter Full Lava IRIS 870  atau Download Disini
  2.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
1. Silahkan pake Flash tool  yang kami upload diatas, jangan pake versi lain

Cara Flash Lava Iris 870 via Flash Tool

Log Read Firmware Lava Iris 870
12:12:39 Connecting…
12:12:39 CPU TYPE:MT6735
12:12:39 Hardware version:CB00
12:12:39 Software version:0000
12:12:39 SecCfgVal :0x00000000
12:12:39 BromVersion :0xFF
12:12:39 BLVersion :0x01
12:12:40 Boot downloading…
12:12:44 EMMC_ID:0x150100513832334D42009594F22573E5
12:12:44 EMMC_PRODUCT_NAME: 0x513832334D42
12:12:44 EMMC_BOOT1_SIZE: 0x00400000
12:12:44 EMMC_BOOT2_SIZE: 0x00400000
12:12:44 EMMC_PRMB_SIZE: 0x00400000
12:12:44 EMMC_GP1_SIZE: 0x00000000
12:12:44 EMMC_GP2_SIZE: 0x00000000
12:12:44 EMMC_GP3_SIZE: 0x00000000
12:12:44 EMMC_GP4_SIZE: 0x00000000
12:12:44 EMMC_USER_SIZE: 0x3A3E00000(14.56 G)
12:12:44 
12:12:44 INT RAM: 128KB SDRAM    EXT RAM: 2GB DRAM
12:12:44 Finding partition.
12:12:44 MTKxCPU: MT6735
12:12:44 ProdName: iris870
12:12:44 ProdModel: iris870
12:12:44 Device: iris870
12:12:44 AndroidVer: 6.0
12:12:45 Brand: Lava
12:12:45 MTKxPRJ: alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6
12:12:45 DisplayID: LAVA_iris870_INT_S120_17E04
12:12:45 BoardID: iris870
12:12:45 BuildDate: Thu May 11 10:00:44 CST 2017
12:12:45 
12:12:45 Empty/useless files we will reduce it.
12:12:45 
12:12:45 Reading  lk.bin .
12:12:45 Reading  boot.img .
12:12:47 Reading  recovery.img .
12:12:49 Reading  logo.bin .
12:12:50 Reading  secro.img .
12:12:51 Reading  trustzone.bin .
12:12:51 Reading  trustzone.bin .
12:12:52 Reading  system.img .
12:19:43 Reading  BPLGUInfo .
12:19:45 Reading  userdata.img .
12:19:47 Reading  cache.img .
12:19:48 
12:19:48 Android_Info.txt create success.
12:19:48 File save path:D:\lava\lava 870\New folder (2)\MT6735_iris870_6.0_Lava_alps-mp-m0.mp1-V2.39.1_lava6735m.65u.m_P6_2018-03-03 13_12_45\
12:19:48 Elapsed time: 00:07:18.

Flash Polytron R2502 White & Red

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

Bahan :
1. Download Firmware PAC Polytron R2502

 

 

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Flash Polytron R2502 via Research Download

Log Read Firmware Polytron R2502
Start  at : [3/23/2017 / 8:57:54 PM]
Operation : Read FullFlash [ v1.24 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : scx35_sp7731gea_dt_MQ5018A04_Polytron
Model Brand : Polytron
Model Device: scx35_sp7731gea
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA
Project Ver : Polytron.B1B8.007.20151102
Model Ext   : Polytron R2502

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1071 MiB
Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_scx35_sp7731gea_4.4.2_Polytron.B1B8.007.20151102_Polytron_R2502\
Done!

Flash, Firmware & BYPASS FRP Mito A69

Model Name  : s7358_qhd_lmplus_dt_Multi
Model Brand : MITO_A69
Model Device: scx35_s7358_qhd_lm
AndrVersion : 5.1
BaseBand CPU: S7358_QHD_LM
Project Ver : MITO_A69_07-09-2016_V10
Model Ext   : MITO_A69

Bahan:

DOWNLOAD BYPASS FRP ONLY / BYPASS AKUN GOOGLE ~ MITO A69

1. Download Firmware PAC FULL Mito A69 v10 atau Download disini

2. Download Firmware PAC FULL Mito A69 v14 atau Download disini

3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Kerja :

  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (- /+)
  • Flash  Mito A69 via research Download, flash aja dgn rom diatas + BYPASS FRP
  • Buat mito A69 V08 : MITO_A69_16112016_V08 silah kan pake A69 versi 014 => klo berhenti dis ystem, flash pake v14 tanpa system, selesai baru flash pake system, DONE

Model Name  : sp7731g_s7358_qhd_lm_oversea
Model Brand : HOTWAV
Model Device: scx35_s7358_qhd_lm
AndrVersion : 6.0
BaseBand CPU: S7358_QHD_LM
CompileDate : 11/19/2016 8:40:13 AM
Project Ver :
Model Ext   : MITO_A69

    Cara Flash  Mito A69 via Research Download

    Log Read Firmware Mito A69
    Operation : Read FullFlash [ v1.26 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    – > Wait phone connected …
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    Model Name  : s7358_qhd_lmplus_dt_Multi
    Model Brand : MITO_A69
    Model Device: scx35_s7358_qhd_lm
    AndrVersion : 5.1
    BaseBand CPU: S7358_QHD_LM
    Project Ver : MITO_A69_07-09-2016_V10
    Model Ext   : MITO_A69
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_540x960.bin
    Skip [EMP] : FBOOTLOGO
    Skip [EMP] : FBOOTLOGO3
    Skip [EMP] : FBOOTLOGO4
    Skip [EMP] : FBOOTLOGO5
    Skip [EMP] : FBOOTLOGO6
    Skip [EMP] : FBOOTLOGO7
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img
    AndroidInfo created
    Firmware Size : 1331 MiB
    Saved to : E:\andro 1\mito\mito a69\New folder\S7358_QHD_LM_scx35_s7358_qhd_lm_5.1_MITO_A69_07-09-2016_V10_MITO_A69\
    Done!

    Flash Brandcode B11 ~ Fix LCD Buram After Flash

    Brandcode B11 BP237_Brandcode_V2.1_20161119
    Model Name  : t13_bc_237_64_8_dt
    Model Brand : SPRD
    Model Device: t13_bc_237_64_8
    AndrVersion : 5.1
    BaseBand CPU: T13_BC_237_64_8
    Project Ver : 20161119
    Model Ext   : B11

    Brandcode V2.1 diflash pake V1.0, alhasil LCD jadi Burem kemudian gelap, tapi muncul suara.

    Bahan:
    1. Download Firmware PAC Brandcode B11

    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Turorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
    Error pada research download baca disini

    Note :
    1. BOOT Volume +
    2. Samakan versi
    3. kalo gak tau versi, mending uncek uboot, boot, logo, erase uboot

    Cara Flash  Brancode B11 via Research Download

    Log Read Firmware Brandcode B11
    Operation : Read FullFlash [ v1.25 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7731 Crev eMMC Loader v2.0    
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – >Wait phone connected …
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7731 Crev eMMC Loader v2.0    
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    – > Wait phone connected …
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7731 Crev eMMC Loader v2.0    
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    Model Name  : t13_bc_237_64_8_dt
    Model Brand : SPRD
    Model Device: t13_bc_237_64_8
    AndrVersion : 5.1
    BaseBand CPU: T13_BC_237_64_8
    Project Ver : 20161119
    Model Ext   : B11
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : oem.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img
    AndroidInfo created
    Firmware Size : 2329 MiB
    Saved to : E:\andro 1\brandcode\b11\T13_BC_237_64_8_t13_bc_237_64_8_5.1_20161119_B11\
    Done!

    Flash Strawberry S8 SP7731

    Strawberry S8
    Model Name  : H100
    Model Brand : S8
    Model Device: H100
    AndrVersion : 5.0.1
    BaseBand CPU: H100
    Project Ver : H100 14B_test-keys
    Model Ext   : S8

    Bahan:
    1. Download Firmware PAC Strawberry S8 atau Download disini

    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Turorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
    Error pada research download baca disini

    Cara Flash  Strawberry S8 via Research Download

    Log Read Firmware  Strawberry S8
    Operation : Read FullFlash [ v1.25 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Prepare Ok!
    – > Wait phone connected …

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    Model Name  : H100
    Model Brand : S8
    Model Device: H100
    AndrVersion : 5.0.1
    BaseBand CPU: H100
    Project Ver : H100 14B_test-keys
    Model Ext   : S8
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.16_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 772 MiB
    Saved to : E:\andro 1\strawberry\s8\H100_H100_5.0.1_H100_14B_test-keys_S8\
    Done!

    Flash Advan S50D Build Number : WG5016/C12_J_V4.0B/KitKat4.4

    Model Name  : revo_6408
    Model Brand : ADVAN
    Model Device: S50D
    AndrVersion : 4.4.2
    BaseBand CPU: SP7731GEA_HD
    Project Ver : WG5016_ADVANS50D_V03_20151105
    Model Ext   : S50D

    Bahan :
    1. Download Firmware PAC S50D V03 Build Number : WG5016/C12_J_V4.0B/KitKat4.4

    2. Download Firmware PAC S50D V01 dan V04

    3. Buat yang abis di flash ADVAN S50D Blank putih, pake S50D V05

    4. Download Research Download R2.10
    5. Driver SPD by InfinityBox
    6. Turorial Flash via research here
    7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Flash Advan S50D via Research Download

    Log Read Firmware Advan S50D
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : revo_6408
    Model Brand : ADVAN
    Model Device: S50D
    AndrVersion : 4.4.2
    BaseBand CPU: SP7731GEA_HD
    Project Ver : WG5016_ADVANS50D_V03_20151105
    Model Ext   : S50D

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 890 MiB
    Saved to : E:\andro 1\advan\s50d v3\SP7731GEA_HD_S50D_4.4.2_WG5016_ADVANS50D_V03_20151105_S50D\
    Done!

    Cara Flash Mito A72 SC7731

    Model Name  : sp7731geahdrplusoversea
    Model Brand : MITO
    Model Device: scx35_sp7731gea_hd
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : MITO_A72_ANDROID_5.1_T14_20150825
    Model Ext   : MITO_A72

    1. Download Firmware PAC Mito A72

    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Turorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
    Error pada research download baca disini

    Cara Flash Mito A72 via Research Download

    Log Read Firmware Mito A72
    Operation : Read FullFlash [ v1.22 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Prepare Ok!

    – > Wait phone connected …

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731geahdrplusoversea
    Model Brand : MITO
    Model Device: scx35_sp7731gea_hd
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : MITO_A72_ANDROID_5.1_T14_20150825
    Model Ext   : MITO_A72

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_720x1280.bin
    [Read Ok] : fblogo_720x1280.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1285 MiB
    Saved to : E:\InfinityBox\CM2SPD\Flash\SP7731GEA_HDR_scx35_sp7731gea_hd_5.1_MITO_A72_ANDROID_5.1_T14_20150825_MITO_A72\
    Done!

    Flash Advan S50G V0.1 & V0.2

    Model Name  : revo_3204
    Model Brand : ADVAN
    Model Device: S50G
    AndrVersion : 4.4.2
    BaseBand CPU: SP7731GEA
    Project Ver : WG5022_S50G_V0.1_20150828
    Model Ext   : S50G

    Bahan :
    1. Download Firmware PAC

    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Turorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Flash Advan S50G via Research Download

    Log Read Firmware Advan S50G
    Operation : Read FullFlash

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!

    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Step #3 Passed!

    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : revo_3204
    Model Brand : ADVAN
    Model Device: S50G
    AndrVersion : 4.4.2
    BaseBand CPU: SP7731GEA
    Project Ver : WG5022_S50G_V0.1_20150828
    Model Ext   : S50G

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.22.3_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata.img

    Firmware Size : 839 MiB
    Saved to : G:\InfinityBox\CM2SPD\Flash\SP7731GEA_S50G_4.4.2_WG5022_S50G_V0.1_20150828\
    Done!

    Flash Advan S4i TCS4036A/C22B/Kitkat4.4

     Advan S4i TCS4036A/C22B/Kitkat4.4

    Model Name  : n9_sc7715ga_0402
    Model Brand : ADVAN
    Model Device: Vandroid
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715GA
    Project Ver : TCS4036_ADVAN_S4i_V4.0_20151012
    Model Ext   : S4i

    TCS4036_ADVAN_S4i_V4.0_20151012
    TCS4036_ADVAN_S4i_V5.0_20151123

    Bahan :
    1. Download Firmware PAC

    2. Download Research Download R2.10
    3. Driver SPD by InfinityBox
    4. Turorial Flash via research here
    5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Flash Advan S4i via Research Download

    Log Read Firmware Advan S4i
    Operation : Read FullFlash [ v1.16 ]
    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC7715 Loader NAND v1.1 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected NAND Flash , Structure detect Ok!
    [FW_READER] : Step #1 Passed!
    [FW_READER] : Step #2 Passed!
    [FW_READER] : Initialize Ok ,  0x14 , NAND : b256k
    [FW_READER] : Step #3 Passed!
    Model Name  : n9_sc7715ga_0402
    Model Brand : ADVAN
    Model Device: Vandroid
    AndrVersion : 4.4.2
    BaseBand CPU: SCX15_SP7715GA
    Project Ver : TCS4036_ADVAN_S4i_V4.0_20151012
    Model Ext   : S4i
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv_b256k.img
    [Read Ok] : nvitem_w.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : sc7715_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : CP2._CP2_WCN_14C_W14.51_Release.bin
    [Read Ok] : logo_480x854.bin
    [Read Ok] : fblogo_480x854.bin
    [Read Ok] : boot.img
    [Read Ok] : system_b256k.img
    [Read Ok] : cache_b256k.img
    [Read Ok] : recovery.img
    [Read Ok] : userdata_b256k.img
    AndroidInfo created
    Firmware Size : 343 MiB
    Saved to : G:\andro3\ADVAN\advan s4i\SCX15_SP7715GA_[NAND_b256k]_Vandroid_4.4.2_TCS4036_ADVAN_S4i_V4.0_20151012_S4i\
    Done!