Cara Flash Mito T65

1GT

Model Name : sp7731geaplus_k03_whxmito_64_8_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_64_8
Project Ver : LMY47D release-keys
Model Ext : MITO_T65

Bahan :
1. Download Firmware Mito T65 atau Download Disini

2. Download Research Download R2.10

3. Driver SPD by InfinityBox

4. Tutorial Flash via research here

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Mito T65 via Research Download

Log Read Firmware Mito T65

Operation : Read FullFlash [ v1.22 ]
1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
==== Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : sp7731geaplus_k03_whxmito_64_8_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_64_8
Project Ver : LMY47D release-keys
Model Ext : MITO_T65
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1730 MiB
Saved to : F:\andro3\mito\mito t65\SP7731GEA_K03_WHXMITO_64_8_scx35_sp7731gea_k03_whxmito_64_8_5.1_LMY47D_release-keys_MITO_T65\
Done!

syarat-dan-ketentuan

Iklan

Flash Polytron R2501

2501

Polytron R2501 atau Polytron Rocket Lite R2501 juga termasuk hape yg sering mengalami bootloop.

Salah satu solusi untuk mengobati hape anda yg bootloop ataupun matot bisa dengan flashing ataupun terserang virus. Langkah-langkah flashingnya sebagai berikut Lolipop:

  1.  Download firmwarenya stock rom Polytron R2501 ok scatternya  DOWNLOAD DISINI
  2.  Firmware Polytron R2501 Update kangsuper terbaru Download Disini
  3.  Download Flash Toolnya DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi) , Mahar pulsa 10k

Flash Polytron R2501


Log Read Firmware Polytron R2501

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 700100563130303038067E5C672A429D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100563130303038067E5C672A429D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now …
Brand     : POLYTRON
ProdName  : POLYTRON__R2501
ProdModel : POLYTRON R2501
Device    : POLYTRON
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_BIRD6582.WT.A.L
[Read Ok] : preloader_bird6582_wt_a_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img
[ScatCFG] : MT6582 / V1.1.1 / bird6582_wt_a_l / EMMC
FW Size : 1062 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__POLYTRON__POLYTRON_R2501__POLYTRON__5.0__ALPS.L0.MP2.V1_BIRD6582.WT.A.L\
All done!

syarat-dan-ketentuan