Cara Flash & BYPASS FRP Advan S5E-NXT V1.6 & V2.0 ~ LOCK AKUN GOOGLE

Model Name  : revo_xx08
Model Brand : ADVAN
Model Device: S5E_NXT
AndrVersion : 5.1
BaseBand CPU: SP7731CEA
CompileDate : 10/24/2016 2:16:39 AM
Project Ver : TCS5056A_ADVAN_S5E_NXT_V1.6_20161024
Model Ext   : S5E_NXT

S5E-NXT yang kami upload ada 2 versi, v1.6 dan v2.0
NOTE :  cek dibawah imei ; SN : S5ES31S=V1.6 & S5E5NOSSDG=V2.0
Bahan :

*) BYPASS FRP ONLY / BYPASS AKUN GOOGLE PAC FILE

Cara Kerja BYPASS FRP :

  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (+)

*) FIRMWARE FULL

1. Advan S5E-NXT V1.6 & Tool STICKER SN : S5ES31S

2. Advan S5E-NXT V2.0 & Tool STICKER SN :S5E5NOSSDG

3. Driver SPD by InfinityBox

4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Note :
1. cek dibawah imei ; SN : S5ES31S=V1.6 & S5E5NOSSDG=V2.0
bila sticker hilang, untuk mengetahui apakah S5E-NXT anda v1.6 atau v2.0 silahkan lakukan flashing via Research download atau QGDP, bila gak jalan berarti versi satunya
2. S5E-NXT V1.6 flash via Research Download
3. S5E-NXT V2.0 flash via QGDP (PASS QGDP : 369)
4. BOOT vol-

Cara Bypass FRP Advan S5E-NXT via research Download

Cara Flash Advan S5E-NXT via QGDP tool

Log Info Firmware Advan S5E-NXT
Operation : Check/Read Info [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 11 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : revo_xx08
Model Brand : ADVAN
Model Device: S5E_NXT
AndrVersion : 5.1
BaseBand CPU: SP7731CEA
CompileDate : 10/24/2016 2:16:39 AM
Project Ver : TCS5056A_ADVAN_S5E_NXT_V1.6_20161024
Model Ext   : S5E_NXT

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:20

Flash ZTE V811W via CM2 (HS-9008) & SDCARD

Brand     : ZTE
ProdName  : ZTE-V811
ProdModel : ZTE V811W
Device    : P821E10
AndroidVer: 4.4.2
Manufact. : ZTE
QLMxCPU   : MSM8610
DevInfo : MSM8610__ZTE__ZTE__ANDR_v4.4.2__ZTE_V811W__P821E10__ZTE-V811

Bahan :
1.Via HS-9008 Tool wajib Infinity CM2 atau Unitool/volcano

2. Via SD-CARD / MMC

3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash ZTE V811W via CM2 (Boot volume up+down colok kabel EDL)

Cara Flash ZTE V811W via SDCARD
1. Sesuaikan versi
2. Copy Update.zip ke mmc, masukkan ke ZTE V811W
3. Tekan Volume up terus tekan on, tunggu sampai masuk ke recovery
4. Wipe dulu, data & cache
5. Pilih upply update from sdcard
6. Tunggu same done, reboot

Log Read Flash ZTE V811W
 Operation : Read Flash [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]
ID_BLOCK_S : 0576C200
ID_BLOCK_I : 008110E1
ID_BLOCK_L : 857F15E14CDAC7C2BD926263ACF77F4F
ID_BLOCK_L : 2D20EE4132DD0D863BFADF141E918FCC
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000
Boot Ok!
Brand     : ZTE
ProdName  : ZTE-V811
ProdModel : ZTE V811W
Device    : P821E10
AndroidVer: 4.4.2
Manufact. : ZTE
QLMxCPU   : MSM8610
DevInfo : MSM8610__ZTE__ZTE__ANDR_v4.4.2__ZTE_V811W__P821E10__ZTE-V811
Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : deploy.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : boot.img
[Read Ok] : tz.mbn
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : fs_gc.img
[Read Ok] : splash.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8x10 / eMMC
Firmware Size : 785 MiB

Done!

Flash Hisense KINGKONG II C20 via Mode HS 9008

Hisense KINGKONG II C20
Brand     : Hisense
ProdName  : C20AE
ProdModel : C20
Device    : HS8929QC
AndroidVer: 5.1.1
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1147.6.02.00.ID00
DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.1.1__C20__HS8929QC__C20AE__L1147.6.02.00.ID00

Tool Flash wajib mengunakan CM2 atau Unitool/volcano

Bahan :
1. Download Firmware Hisense KINGKONG II C20 atau Download Disini
2. Tool wajib Infinity CM2 atau Unitool/volcano
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Hisense KINGKONG II C20 via CM2

Log Read Firmware Hisense KINGKONG II C20
Operation : Read Flash [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 415 [MSM8929]
ID_BLOCK_S : 052D115D
ID_BLOCK_I : 0091B0E1
ID_BLOCK_L : 6A9AF00EA935222D1A4F818E4910A0A8
ID_BLOCK_L : E49F21888D1446CFC22D665F55585675
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8929 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB800000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!
Brand     : Hisense
ProdName  : C20AE
ProdModel : C20
Device    : HS8929QC
AndroidVer: 5.1.1
Manufact. : Hisense
QLMxCPU   : MSM8916
QLMxPRJ   : L1147.6.02.00.ID00
DevInfo : MSM8916__Hisense__Hisense__ANDR_v5.1.1__C20__HS8929QC__C20AE__L1147.6.02.00.ID00

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : misc.img
[Read Ok] : diag.bin
[Read Ok] : lsplash.img
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
Android Info saved!
Read finished!
Configuration : MSM8929 / eMMC
Firmware Size : 2448 MiB

Cara Flash Oppo F1fw via Mode HS-USB QDLoader 9008

Brand     : OPPO
ProdName  : F1f
ProdModel : F1f
Device    : F1f
AndroidVer: 5.1.1
Manufact. : OPPO
QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__F1f__F1f__F1f

Tool Flash wajib mengunakan CM2 atau Unitool/volcano

Bahan :
1. Download Firmware Oppo F1fw atau Download Disini
2. Tool wajib CM2 atau Unitool/volcano
3. Tutorial silahkan lihat di video di bawah
4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Oppo F1fw via CM2

Log Read Flash Oppo F1fw
Operation : Read Flash [ v1.11 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone…
Device Found!
Initialize …
Handshake passed!
BB_IDC_CPU : SnapDragon 610 [MSM8936]
ID_BLOCK_S : 06DCC71C
ID_BLOCK_I : 0090B0E1
ID_BLOCK_L : A95B31CD68F6E3EED98E464F88D3636B
ID_BLOCK_L : B7CE70DBDC47F77C915C31EEE40B2526
Use CM2 Internal Loader
Loader Sent! Initializing …
Running FireHose on BBID : MSM8936 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]
ExtInfo : 0x00004000/00004000/00001000/00001000
Boot Ok!

Brand     : OPPO
ProdName  : F1f
ProdModel : F1f
Device    : F1f
AndroidVer: 5.1.1
Manufact. : OPPO
QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__F1f__F1f__F1f

Reading Flash Content …
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : sbl1.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : pnvbak.img
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : driver.iso
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8936 / eMMC
Firmware Size : 3094 MiB

Done!
Elapsed: 00:05:09