Firmware HOT 10 Scatter File

Product Brand  : Infinix
Product Device : Infinix-X682B
Product Model  : Infinix X682B
Product Name   : X682B-GL
Patch Level    : QP1A.190711.020
Display ID     : X682B-H694ABT-Q-GL-210831V339
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-09-05
Build Time     : 31.08.2021
Product Info   : x682b_h694
Product Board  : Infinix-X682B
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X682B__10__X682B-H694ABT-Q-GL-210831V339__QP1A.190711.020__x682b_h694

Bahan :
1. Download ROM Firmware HOT 10  Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 NOTE : boot vol + /-

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Talbot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 209E867D72374342E3A08B0E53A6F017
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 5C0A36ED9F98B9D6352E9B403B8149E5CB7FFA11076AEA1C4BDE71FEF84FE20D
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6768
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x682b_h694.bin
     EMI : CNT : 000E
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00070000 [ 448.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 90014A68433861503E028EC9DFB1670B
        EMMC: VEN : HYNIX : OEM : 74 : ID : 68433861503E
        EMMC: VEN : HYNIX : hC8aP>
        EMMC: SNN : 2395594673 ( 0x8EC9DFB1) , MF : 6/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6768 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0001 , EVOL : 0x0000

        RNID : E1B96354D1D5C05779F71CF7C766316C

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X682B
Product Model  : Infinix X682B
Product Name   : X682B-GL
Patch Level    : QP1A.190711.020
Display ID     : X682B-H694ABT-Q-GL-210831V339
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-09-05
Build Time     : 31.08.2021
Product Info   : x682b_h694
Product Board  : Infinix-X682B
Board Platform : mt6768
Product Manfct : INFINIX MOBILITY LIMITED

MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X682B__10__X682B-H694ABT-Q-GL-210831V339__QP1A.190711.020__x682b_h694

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 8%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 4.71 GB
Android Info saved : _Android_info.txt
Scatter  : MT6768_Android_scatter.txt
Saved to : D:\infinix\x682b\MT6768__INFINIX_MOBILITY_LIMITED__Infinix_X682B__10__X682B-H694ABT-Q-GL-210831V339__QP1A.190711.020__x682b_h694\

Done!
Elapsed: 00:09:25 

Firmware Infinix X688B

 NO SS

Product Brand  : Infinix
Product Device : Infinix-X688B
Product Model  : Infinix X688B
Product Name   : X688B-GL
Patch Level    : RP1A.200720.011
Display ID     : X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-04-05
Build Time     : 18.04.2022
Product Info   : x688b_h659
Product Board  : Infinix-X688B
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED

Bahan :
1. Download ROM Firmware X688B Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 Operation : Read Firmware [ v2.34 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Cervino
     TYPE : MODERN [RAPHAEL]
BROM : MEID : C964DD8EF6E14EFBA2CFA986F46CDCE6
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : 6BD5C565BDC4DBE9D3BF1C6AACDB14C3781730231E05471CE00035214CFE8946
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!

        EMMC: CID : 1501004448364441420288F59074884B
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 444836444142 : PRV : 0x02
        EMMC: VEN : SAMSUNG : DH6DAB
        EMMC: SNN : 2297794676 ( 0x88F59074 ) , MF : 8/2021

     EMI : DEV : FireFly
     EMI : SRC : preloader_x688b_h659.bin
     EMI : CNT : 0014
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A000 [ 232.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 1501004448364441420288F59074884B
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 444836444142 : PRV : 0x02
        EMMC: VEN : SAMSUNG : DH6DAB
        EMMC: SNN : 2297794676 ( 0x88F59074 ) , MF : 8/2021

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x01000000 [ 16.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 91B3D7863DB6002671F9B9BB366D8E8F

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X688B
Product Model  : Infinix X688B
Product Name   : X688B-GL
Patch Level    : RP1A.200720.011
Display ID     : X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2022-04-05
Build Time     : 18.04.2022
Product Info   : x688b_h659
Product Board  : Infinix-X688B
Board Platform : mt6765
Product Manfct : INFINIX MOBILITY LIMITED

MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X688B__11__X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527__RP1A.200720.011__x688b_h659

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 98%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : gz.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 6%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 5.81 GB
Android Info saved : _Android_info.txt
Scatter  : MT6765_Android_scatter.txt
Saved to : D:\infinix\x688b\MT6765__INFINIX_MOBILITY_LIMITED__Infinix_X688B__11__X688B-H659ABCDEFGHIJKLMNO-R-GL-220418V527__RP1A.200720.011__x688b_h659\

Done!

Firmware Infinix X695C NOTE 10 Pro | Infinix_X695C__11__X695C-H854JK-R-GL-211019V307

Product Brand  : Infinix
Product Device : Infinix-X695C
Product Model  : Infinix X695C
Product Name   : X695C-GL
Patch Level    : RP1A.200720.011
Display ID     : X695C-H854JK-R-GL-211019V307
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 19.10.2021
Product Info   : x695_h854
Product Board  : Infinix-X695C
Board Platform : mt6785
Product Manfct : INFINIX MOBILITY LIMITED

Bahan :
1. Download ROM Firmware X695C NOTE 10 Pro Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

 boot vol + /-

 Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Krug
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B5C0E1AC1F5541EF283C5D448F1370C8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : EE3ED7960722888658B2B8F1BE2FA2B8C7BA183DA10A2D0D8B3A136E9A9683AF
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6785
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x695_h854.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        UFS: AD014839485131354146414D42444152
        UFS:
             VEN  : 0x01AD
             VID  : H9HQ15AFAMBDAR
             IFW  : A002
             LU0  : 0x00400000 [ 4.00 MB ]
             LU1  : 0x00400000 [ 4.00 MB ]
             LU2  : 0x1DCB000000 [ 119.17 GB ]
             FSN  : 2010B1B09A80
             REG  : 0x101010000

        CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : FB64510978E1B3D9AE7F76EBE7CC0E4F

DA : USB : HIGH-SPEED

Boot done!

Info : Device support slots
Info : Active slot : a

Product Brand  : Infinix
Product Device : Infinix-X695C
Product Model  : Infinix X695C
Product Name   : X695C-GL
Patch Level    : RP1A.200720.011
Display ID     : X695C-H854JK-R-GL-211019V307
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 19.10.2021
Product Info   : x695_h854
Product Board  : Infinix-X695C
Board Platform : mt6785
Product Manfct : INFINIX MOBILITY LIMITED

MT6785__INFINIX_MOBILITY_LIMITED__Infinix_X695C__11__X695C-H854JK-R-GL-211019V307__RP1A.200720.011__x695_h854

Read : preloader.bin
Read : proinfo.img
Read : tkv.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : cam_vpu1.img
Read : cam_vpu2.img
Read : cam_vpu3.img
Read : gz.img
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : nvram.bin
Read : super.img
ExtSparse : Compression ratio : 1%
Read : tranfs.img
Read : userdata.img

FW Size  : 7.94 GB
Android Info saved : _Android_info.txt
Scatter  : MT6785_Android_scatter.txt
Saved to : D:\infinix\x695c\MT6785__INFINIX_MOBILITY_LIMITED__Infinix_X695C__11__X695C-H854JK-R-GL-211019V307__RP1A.200720.011__x695_h854\

Done!
Elapsed: 00:15:38

Firmware Infinix X657B Smart 5

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Bahan :
1. Download ROM Firmware Infinix X657B SMART 5 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 9E379253896D0E62883C5030B80DF3B8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : DA37166FA857A38B35ED1992D66CFB88D208EB05A3CCE2A9F845DABD87AC04DD
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657b_h6117.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 700100443236303332102E097FDAC7CF
        EMMC: VEN : KINGSTON : OEM : 0 : ID : 443236303332
        EMMC: VEN : KINGSTON : D26032
        EMMC: SNN : 772374490 ( 0x2E097FDA) , MF : 12/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x750000000 [ 29.25 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : ED4F09CDD019FF2FAEDBD75E63C000D3

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 17%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 2.87 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\X657B\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117\

Done!
Elapsed: 00:06:42

sumber : https://kangsuper.blogspot.com/2022/01/firmware-infinix-x657b-smart-5.html

Firmware Infinix X657C SMART 5

Product Brand  : Infinix
Product Device : Infinix-X657C
Product Model  : Infinix X657C
Product Name   : X657C-GL
Patch Level    : QP1A.190711.020
Display ID     : X657C-H6117GH-QGo-GL-211018V263
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-10-05
Build Time     : 18.10.2021
Product Info   : x657c_h6117
Product Board  : Infinix-X657C
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657C__10__X657C-H6117GH-QGo-GL-211018V263__QP1A.190711.020__x657c_h6117

Bahan :
1. Download ROM Firmware Infinix X657C SMART 5 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-

Operation : Read Firmware Infinix X657C SMART 5[ v2.31 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : E30A7D73401F6772F886DEC9F43C9A0D
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FBEE723DA4B6EA7E8F2B96A29694FE7A98521801A871EB80EF1BFB15F4A8012B
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657c_h6117.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 880103534C44333247550E818324A701
        EMMC: VEN : FORESEE : OEM : 3 : ID : 534C44333247
        EMMC: VEN : FORESEE : SLD32G
        EMMC: SNN : 243368740 ( 0x0E818324) , MF : 10/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x73A000000 [ 28.91 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 2AB8BE27DECC276999CFED9EFF5FB4CD

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X657C
Product Model  : Infinix X657C
Product Name   : X657C-GL
Patch Level    : QP1A.190711.020
Display ID     : X657C-H6117GH-QGo-GL-211018V263
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-10-05
Build Time     : 18.10.2021
Product Info   : x657c_h6117
Product Board  : Infinix-X657C
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657C__10__X657C-H6117GH-QGo-GL-211018V263__QP1A.190711.020__x657c_h6117

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 15%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 2.97 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\x657c\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657C__10__X657C-H6117GH-QGo-GL-211018V263__QP1A.190711.020__x657c_h6117\

Done!
Elapsed: 00:07:11

Download Firmware Polytron P551S scatter file

 NO SS, CEK LOG

Patch Level    : O11019
Display ID     : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 02.11.2018
Product Model  : P551S
Product Brand  : Polytron
Product Name   : P551S
Product Device : P551S
Product Board  : mt6753
Product Manfct : Polytron
Product Info   : POLYTRON_P551S
Product Board  : k53v1_bsp
Board Platform : mt6753

Bahan :
1. Download Firmware Polytron P551S scatter file
 Download Rom Firmware Polytron P551S

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

LOG READ FIRMWARE Polytron P551S

Operation : Read Firmware [ v2.16 ]

ExtSparse : Enabled
ForceRead : Disabled

  1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
  2. Insert USB cable in phone
    Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x02
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 90014A484247346132A56100409725FB
DAInf: 4 : 2 : 155
DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

    EMMC: 90014A484247346132A56100409715FB
    EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
    EMMC:
          BOOT1  : 0x00400000 [ 4.00 MB ]
          BOOT2  : 0x00400000 [ 4.00 MB ]
          RPMB   : 0x00400000 [ 4.00 MB ]
          USER   : 0x747C00000 [ 29.12 GB ]

    SRAM: 0x00020000 [ 128.00 KB ]
    DRAM: 0xC0000000 [ 3.00 GB ]

    CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

    RNID : 826B25E7283A32364E00D12D925197CE

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-10-05
Build Time : 02.11.2018
Product Model : P551S
Product Brand : Polytron
Product Name : P551S
Product Device : P551S
Product Board : mt6753
Product Manfct : Polytron
Product Info : POLYTRON_P551S
Product Board : k53v1_bsp
Board Platform : mt6753

MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 41%
Read : cache.img
Read : userdata.img

FW Size : 1.70 GB
Android Info saved : _Android_info.txt
Scatter : MT6753_Android_scatter.txt
Saved to : E:\polytron\polytron p551s\MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S\

Done!
Elapsed: 00:07:55

Flash City Call CT-88 MTK & SPD

City Call CT-88
Model Name  : KS4506C_CityCall
Model Brand : CityCall
Model Device: KS4506C_CityCall
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FWVGA
Project Ver : SW04_CT_88_2015_06_05
Model Ext   : CT-88

Bahan :

  • City Call CT-88 MTK 6572

 

 

 

  • City Call CT-88 MTK
  1. Download  Firmware City Call CT-88 MT6572 V02  atau Download Disini
  2. Download  Firmware City Call CT-88 MT6572 v08  atau Download Disini
  3.  Download SP-Flash-Tool Wajib pake versi ini Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Untuk CityCall CT-88 MT6572 versi lain silahkan download dibawah :
-DOWNLOAD Firmware scatter MT6572_CityCall_CT-88_a3_324_ax_zsm_a3_9_old

  • City Call CT-88 SPD

1.  SC7731

 

2. SC7731C

Download Firmware PAC City Call CT-88 SW04 SC7731C atau download disini

3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash City Call CT-88 via Research Download

[FW_READER] : Prepare Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : KS4506C_CityCall
Model Brand : CityCall
Model Device: KS4506C_CityCall
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FWVGA
Project Ver : SW04_CT_88_2015_06_05
Model Ext   : CT-88

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W14.48_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1177 MiB
Saved to : F:\andro3\CITY CALL\CT-88\SP7731GEA_FWVGA_KS4506C_CityCall_4.4.2_SW04_CT_88_2015_06_05_CT-88\
Done!

Elapsed: 00:05:54

 

Flash Axioo PICOphone L1 GEF Kitkat & Lolipop

Model Name  : PICOphone_L1
Model Brand : Axioo
Model Device: PICOphone_L1
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FS032
Project Ver : PICOphone_L1_GEF_SW20150508_R280515
Model Ext   : PICOphone_L1

Bahan :
1. Download Firmware PAC Axioo PICOphone L1 GEF

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

CATATAN PENTING
Cek GEF atau bukan dibawah IMEI
Axioo L1, berdasar dari pengalaman kami
1. Yang sudah upgrade ke versi LOLI jangan pake file KK hasil bisa man getar
2. Bagi versi KK flash ke KK atau flash ke Loli buat L1 GEF
3. Bagi yg sudah diflash ke versi LOLI GEF3 dan hasil baseband unknown, silahkan flash pake LOLI GEF

                                 

Error pada research download baca disini

Cara Flash Axioo PICOphone L1 GEF  via Research Download

Log Read Firmware  Axioo PICOphone L1
[FW_READER] : Prepare Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_L1
Model Brand : Axioo
Model Device: PICOphone_L1
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_FS032
Project Ver : PICOphone_L1_GEF_SW20150508_R280515
Model Ext   : PICOphone_L1

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_w.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.16_Release.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1283 MiB
Saved to : F:\AXIOO\AXIOO L1\GEF\SP7731GEA_FS032_PICOphone_L1_4.4.2_PICOphone_L1_GEF_SW20150508_R280515_PICOphone_L1\
Done!

Elapsed: 00:06:42

Flash Polytron R2457 Black Gold & Black Gold ZT

 Polytron R2457 Rocket S2

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2457_V13_20160503
Model Ext   : POLYTRON-R2457
 Note:
Cek untuk R2457 black gold, atau untuk R2457 black gold ZT

Bahan :
1. Download Firmware PAC POLYTRON_R2457

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Polytron R2457  via Research Download

Log Read Firmware Polytron R2457
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : sp7731geahdrplusoversea
Model Brand : POLYTRON
Model Device: device
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : POLYTRON_R2457_V13_20160503
Model Ext   : POLYTRON-R2457

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1987 MiB
Saved to : F:\andro3\POLYTRON\r2457\SP7731GEA_HDR_device_5.1_POLYTRON_R2457_V13_20160503_POLYTRON-R2457\
Done!

Cara Flash Mito A550

 MITO 550 16010 T06

Model Name  : MITO A550
Model Brand : MITO
Model Device: MITO_A550
AndrVersion : 5.1
BaseBand CPU: MITO
Project Ver : MITO_A550_160106_T06
Model Ext   : MITO_A550

Bahan :
1. Download Firmware PAC MITO A550_160106_T06
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Tutorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash MITO A550  via Research Download

Log Read Firmware Mito A550
[FW_READER] : Prepare Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : MITO_A550
Model Brand : MITO
Model Device: MITO_A550
AndrVersion : 5.1
BaseBand CPU: MITO
Project Ver : MITO_A550_160106_T06
Model Ext   : MITO_A550

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1813 MiB
Saved to : F:\andro3\mito\a550 t6\MITO_MITO_A550_5.1_MITO_A550_160106_T06_MITO_A550\
Done!