Firmware Vava iCherry X1 MT6580

Patch Level    : MRA58K
Display ID     : Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 13.12.2018
Product Model  : iCherry_X1
Product Brand  : VAVA
Product Name   : iCherry_X1
Product Device : iCherry_X1
Product Manfct : VAVA
Board Platform : mt6580
Product Info   : iCherry_X1

MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1

 Bahan :
1. Download ROM Firmware Vava iCherry X1 | MT6580  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 
Operation : Read Firmware Vava iCherry X1[ v2.29 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 5100011542363133F6F20142B7C3D8B2
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

        EMMC: CID : 15010051333136424201F2F6B2D8C3B7
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 513331364242
        EMMC: VEN : SAMSUNG : Q316BB
        EMMC: SNN : 4076253912 ( 0xF2F6B2D8) , MF : 12/2016

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : BFF77AAA8AA2F2032AD52D1DAC86EE1E

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 13.12.2018
Product Model  : iCherry_X1
Product Brand  : VAVA
Product Name   : iCherry_X1
Product Device : iCherry_X1
Product Manfct : VAVA
Board Platform : mt6580
Product Info   : iCherry_X1

MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 43%
Read : cache.img
Read : userdata.img

FW Size  : 1.48 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : D:\New folder (2)\New folder\MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1\

Done!
Elapsed: 00:11:09

Firmware ZYREX ZT-216 SPD

 NO SS

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : zyrex
Device Model   : ZT_216
Device CPU     : sp9832a_2h11_volte
Device IntName : ZT_216
Device Version : 7.0
Device Compile : 3/20/2018 12:30:17 PM
Device Project : MT-704QF_USER_V1_20180320
Device ExtInfo : ZT 216

Bahan :

Tool  :

  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k


Cara Kerja :

  • BOOT VOLUME -/DOWN

 
 Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 8 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 8 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 8 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : ZT_216
Model Brand : zyrex
Model Device: ZT_216
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : MT-704QF_USER_V1_20180320
Model Ext   : ZT 216

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2706 MiB
Saved to : E:\zyrex\zt 216\SP9832A_2H11_VOLTE_ZT_216_7.0_MT-704QF_USER_V1_20180320_ZT_216\
Done!

Firmware STRAWBERRY SX ~ SPD SC9832E ~ via CM2 ONLY

NO SS

Patch Level    : OPM2.171019.012
Display ID     : sn15_SX_v07_20181227
Ver. Incmt     : 44415
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 27.12.2018
Product Model  : Strawberry SX
Product Brand  : Strawberry
Product Name   : SX
Product Device : SX
Product Manfct : Strawberry
Product Info   : sp9832e_1h10_go
Product Board  : sp9832e_1h10_32b
Board Platform : sp9832e

Bahan :
1. Download ROM Firmware Flash STRAWBERRY SX

2. File only tested via CM2 SPD v211

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 Log FLASH STRAWBERRY SX  VIA INFINITY CM2 V211

 Operation : Flash Firmware [ v2.11 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Skip update! Reason : FWRead has been not complete by user!

UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : sml.bin
CODE  : sml.bin
CODE  : tos.bin
CODE  : tos.bin
CODE  : vbmeta.img
CODE  : vbmeta.img
CODE  : ldsp_l.bin
CODE  : gdsp_l.bin
CODE  : modem_l.bin
CODE  : modem_wcn.img
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : pm_sys.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : persist.img
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
FSIMG  : system.img
FSIMG  : vendor.img
FSIMG  : userdata.img
FSIMG  : cache.img
FSIMG  : prodnv.img
UBOOT  : u-boot-spl.bin
ERASE : FLASH_L
ERASE : MISC
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:03:46

Firmware Lenovo K320T PAC FILE

Device info :
Patch Level    : NRD90M
Display ID     : K320t_S001_171027_CMCC
Ver. Incmt     : K320t_S001_171027_CMCC
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1513940210
Product Model  : Lenovo K320t
Product Brand  : Lenovo
Product Name   : Lenovo_K320t
Product Device : Lenovo_K320t
Product Board  : L505
Board Platform : sp9850ka
Product Info   : sp9850ka_2c20
Product Manfct : LENOVO
 

Bahan :
1. Download ROM Firmware Lenovo K320T PAC, ROM TANPA BAHASA INDONESIA

2. File only tested via CM2 SPD v205 , belum test via RSD

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Cara flash:

– LIHAT VIDEO GAN, BIAR SINYAL & IMEI tidak HILANG

-Tested juga buat Display ID     : K320t_S006_180706_ROW

Cara Flash Lenovo K320T via cm2

Log Flash Lenovo K320T via cm2

Operation : Flash Firmware [ v2.05 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : PAC : lenovo_k320t_s040.pac
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x1E
PMTMng : Update PMT Ok!

CODE  : boot-sign.img
CODE  : recovery-sign.img
FSIMG  : sysinfo.img
FSIMG  : system.img
FSIMG  : userdata.img
CODE  : sprd_720p_180_180.bmp
CODE  : sprd_720p_180_180.bmp
FSIMG  : cache.img
ERASE : L_RUNTIMENV1
ERASE : MISC
CODE  : tos-sign.bin
CODE  : sml-sign.bin
FSIMG  : persist.img
Flashing finished!
Reconnect Power/Cable!


Done!
Elapsed: 00:04:52