Firmware STRAWBERRY SX ~ SPD SC9832E ~ via CM2 ONLY

NO SS

Patch Level    : OPM2.171019.012
Display ID     : sn15_SX_v07_20181227
Ver. Incmt     : 44415
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-11-05
Build Time     : 27.12.2018
Product Model  : Strawberry SX
Product Brand  : Strawberry
Product Name   : SX
Product Device : SX
Product Manfct : Strawberry
Product Info   : sp9832e_1h10_go
Product Board  : sp9832e_1h10_32b
Board Platform : sp9832e

Bahan :
1. Download ROM Firmware Flash STRAWBERRY SX

2. File only tested via CM2 SPD v211

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Log FLASH STRAWBERRY SX  VIA INFINITY CM2 V211

 Operation : Flash Firmware [ v2.11 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : INF : INFINITY FW PACKAGE
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : 0x0002
FDL : Control transfered!

Boot Done!

PMTMng : Skip update! Reason : FWRead has been not complete by user!

UBOOT  : u-boot.bin
UBOOT  : u-boot.bin
CODE  : sml.bin
CODE  : sml.bin
CODE  : tos.bin
CODE  : tos.bin
CODE  : vbmeta.img
CODE  : vbmeta.img
CODE  : ldsp_l.bin
CODE  : gdsp_l.bin
CODE  : modem_l.bin
CODE  : modem_wcn.img
CODE  : gnssmodem.bin
CODE  : gnssbdmodem.bin
CODE  : pm_sys.bin
CODE  : boot.img
CODE  : recovery.img
FSIMG  : persist.img
CODE  : boot_logo.bmp
CODE  : fastboot_logo.bmp
FSIMG  : system.img
FSIMG  : vendor.img
FSIMG  : userdata.img
FSIMG  : cache.img
FSIMG  : prodnv.img
UBOOT  : u-boot-spl.bin
ERASE : FLASH_L
ERASE : MISC
ERASE : UBOOT_LOG
Flashing finished!
Reconnect Power/Cable!

Done!
Elapsed: 00:03:46

Firmware Lenovo K320T PAC FILE

Device info :
Patch Level    : NRD90M
Display ID     : K320t_S001_171027_CMCC
Ver. Incmt     : K320t_S001_171027_CMCC
Ver. CodeName  : REL
Ver. Release   : 7.0
Sec. Patch     : 2017-12-05
Build Time     : 1513940210
Product Model  : Lenovo K320t
Product Brand  : Lenovo
Product Name   : Lenovo_K320t
Product Device : Lenovo_K320t
Product Board  : L505
Board Platform : sp9850ka
Product Info   : sp9850ka_2c20
Product Manfct : LENOVO
 

Bahan :
1. Download ROM Firmware Lenovo K320T PAC, ROM TANPA BAHASA INDONESIA

2. File only tested via CM2 SPD v205 , belum test via RSD

3. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara flash:

– LIHAT VIDEO GAN, BIAR SINYAL & IMEI tidak HILANG

-Tested juga buat Display ID     : K320t_S006_180706_ROW

Cara Flash Lenovo K320T via cm2

Log Flash Lenovo K320T via cm2

Operation : Flash Firmware [ v2.05 ]

Setting   : Update NVRAM : False
Setting   : Force NVRAM : False
Setting   : Update PMT   : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device …

Device Connected!
BootVersion : SPRD3
Boot : PAC : lenovo_k320t_s040.pac
Sending Init Boot …
Boot sent!
Kick FDL …
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup …
Port speed : 921600
Sending Flash Boot …
Boot sent!
Kick FLASH FDL …
FDL : Control transfered!

Boot Done!

PMTMng : Load PMT
PMTMng : 0x1E
PMTMng : Update PMT Ok!

CODE  : boot-sign.img
CODE  : recovery-sign.img
FSIMG  : sysinfo.img
FSIMG  : system.img
FSIMG  : userdata.img
CODE  : sprd_720p_180_180.bmp
CODE  : sprd_720p_180_180.bmp
FSIMG  : cache.img
ERASE : L_RUNTIMENV1
ERASE : MISC
CODE  : tos-sign.bin
CODE  : sml-sign.bin
FSIMG  : persist.img
Flashing finished!
Reconnect Power/Cable!


Done!
Elapsed: 00:04:52

Download Firmware ViVi R17S scatter file 

Device Brand   : 4G
Device Model   : pri6735_66c_m0
Device CPU     : MT6735
Device IntName : full_pri6735_66c_m0
Device Version : 6.0
Device Compile : 8/2/2019 12:17:10 PM
Device Project : alps-mp-m0.mp1-V2.39.1_pri6735.66c.m0
Device ExtInfo : R17S

Bahan :
1. Download Firmware ViVi R17S scatter file

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash R17s

Log Read Firmware ViVi R17S

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 9 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D33323881C80042F7871FF2
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D4200C881F21FC2F7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID    : 0xFCC4CFBDDF4418F15981EB1051A6EC34
INT RAM    : 0x00020000
EXT RAM    : 0x80000000 [2 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : 4G
ProdName  : full_pri6735_66c_m0
ProdModel : R17S
Device    : pri6735_66c_m0
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : alps-mp-m0.mp1-V2.39.1_pri6735.66c.m0

[Read Ok] : preloader_pri6735_66c_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / pri6735_66c_m0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 4256 MiB
Scatter saved to : D:\New folder\New folder (2)\MT6735__4G__R17S__pri6735_66c_m0__6.0__alps-mp-m0.mp1-V2.39.1_pri6735.66c.m0\

All done!

Firmware Wiko TOMMY 3 Android 7 & 8

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

Bahan :
1. Download Firmware Wiko TOMMY 3   Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Operation : Read Firmware Wiko TOMMY 3
ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM12)
MODE : PRELOADER PORT
PORT : 12
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000001
BROM : SecMode  : SBC
BROM : BROM|BL  : 0xFF|0x03
BROM : PRELOADER PORT
MODE : Wiko : SEC_6739 | Manual : Disabled
BROM : SOCID : C3938EA812AC5827BB680B6D94C6BEA4738886B3148C5C69E46DEA5371E1FF73
AGENT : Look for suitable BootChain in DA …
AGENT : DA_PL.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        EMMC: 150100464536324D420365ADF2EB8521
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : FE62MB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : A89DCC1BDB59F641EDD63BCB719C87E3

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-09-05
Build Time     : 1539253798
Product Brand  : TINNO
Product Device : W_K600
Product Info   : k600_go
Product Model  : K600AG
Product Brand  : TINNO
Product Name   : K600
Product Device : W_K600
Product Manfct : TINNO
Product Board  : k600_go
Board Platform : mt6739

MT6739__TINNO__K600AG__8.1.0__O11019__k600_go

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : misc.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 21%
Read : system.img
ExtSparse : Compression ratio : 7%
Read : cache.img
Read : userdata.img

FW Size  : 1.41 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : D:\wiko\tommy 3\MT6739__TINNO__K600AG__8.1.0__O11019__k600_go\

Download Firmware Polytron P551S scatter file

 NO SS, CEK LOG

Patch Level    : O11019
Display ID     : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-10-05
Build Time     : 02.11.2018
Product Model  : P551S
Product Brand  : Polytron
Product Name   : P551S
Product Device : P551S
Product Board  : mt6753
Product Manfct : Polytron
Product Info   : POLYTRON_P551S
Product Board  : k53v1_bsp
Board Platform : mt6753

Bahan :
1. Download Firmware Polytron P551S scatter file
 Download Rom Firmware Polytron P551S

2. Tested via CM2 , Download SP-Flash-Tool  Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

LOG READ FIRMWARE Polytron P551S

Operation : Read Firmware [ v2.16 ]

ExtSparse : Enabled
ForceRead : Disabled

  1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
  2. Insert USB cable in phone
    Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x02
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6753
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 90014A484247346132A56100409725FB
DAInf: 4 : 2 : 155
DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

    EMMC: 90014A484247346132A56100409715FB
    EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
    EMMC:
          BOOT1  : 0x00400000 [ 4.00 MB ]
          BOOT2  : 0x00400000 [ 4.00 MB ]
          RPMB   : 0x00400000 [ 4.00 MB ]
          USER   : 0x747C00000 [ 29.12 GB ]

    SRAM: 0x00020000 [ 128.00 KB ]
    DRAM: 0xC0000000 [ 3.00 GB ]

    CHIP : MT6753 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

    RNID : 826B25E7283A32364E00D12D925197CE

STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level : O11019
Display ID : A888_03G_P551S_BAND18_FHD_V18_20181016_1340
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-10-05
Build Time : 02.11.2018
Product Model : P551S
Product Brand : Polytron
Product Name : P551S
Product Device : P551S
Product Board : mt6753
Product Manfct : Polytron
Product Info : POLYTRON_P551S
Product Board : k53v1_bsp
Board Platform : mt6753

MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : tz.img
Read : odmdtbo.img
Read : vendor.img
ExtSparse : Compression ratio : 63%
Read : system.img
ExtSparse : Compression ratio : 41%
Read : cache.img
Read : userdata.img

FW Size : 1.70 GB
Android Info saved : _Android_info.txt
Scatter : MT6753_Android_scatter.txt
Saved to : E:\polytron\polytron p551s\MT6753__Polytron__P551S__8.1.0__A888_03G_P551S_BAND18_FHD_V18_20181016_1340__O11019__POLYTRON_P551S\

Done!
Elapsed: 00:07:55