Firmware S21 ULTRA | MT6572 Scatter File

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : S21 Ultra
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_N31-S21_Ultra-HSD

 Bahan :
1. Download ROM Firmware S21 ULTRA | MT6572  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 26 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A2058494E594812A1693A428F77
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , HYNIX
[eMMC] : FLASH_CID : 90014A2058494E594812A1693A428F77
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 0xA931556787B18E4F93EFDE5376FD2D5E
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : S21 Ultra
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W116_N31-S21_Ultra-HSD

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : E:\New folder\MT6572__alps__S21_Ultra__x6_v5_x50__4.4.2__HY_W116_N31-S21_Ultra-HSD\

All done!

Done!
Elapsed: 00:03:55

Firmware Vava iCherry X1 MT6580

Patch Level    : MRA58K
Display ID     : Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 13.12.2018
Product Model  : iCherry_X1
Product Brand  : VAVA
Product Name   : iCherry_X1
Product Device : iCherry_X1
Product Manfct : VAVA
Board Platform : mt6580
Product Info   : iCherry_X1

MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1

 Bahan :
1. Download ROM Firmware Vava iCherry X1 | MT6580  Scatter File

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 
Operation : Read Firmware Vava iCherry X1[ v2.29 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : PreLoader USB VCOM Port (COM26)
MODE : PRELOADER PORT
PORT : 26
Waiting BOOT ack …
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : LEGACY [MTK]
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0xFF|0x01
BROM : PRELOADER PORT
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 5100011542363133F6F20142B7C3D8B2
DAInf: 4 : 2 : 156
     DA : DRAM ready!
DA : BOOT to 2nd DA …
DA : Receiving HW info

        EMMC: CID : 15010051333136424201F2F6B2D8C3B7
        EMMC: VEN : SAMSUNG : OEM : 0 : ID : 513331364242
        EMMC: VEN : SAMSUNG : Q316BB
        EMMC: SNN : 4076253912 ( 0xF2F6B2D8) , MF : 12/2016

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3A3E00000 [ 14.56 GB ]

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x40000000 [ 1.00 GB ]

        CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : BFF77AAA8AA2F2032AD52D1DAC86EE1E

 STATUS : BLANK FLASH
 BSTYLE : EMMC FLASH BOOT

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2016-08-05
Build Time     : 13.12.2018
Product Model  : iCherry_X1
Product Brand  : VAVA
Product Name   : iCherry_X1
Product Device : iCherry_X1
Product Manfct : VAVA
Board Platform : mt6580
Product Info   : iCherry_X1

MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1

Read : preloader.bin
Read : proinfo.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : logo.bin
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 43%
Read : cache.img
Read : userdata.img

FW Size  : 1.48 GB
Android Info saved : _Android_info.txt
Scatter  : MT6580_Android_scatter.txt
Saved to : D:\New folder (2)\New folder\MT6580__VAVA__iCherry_X1__6.0__Y8303.YX.A7.iCherry.B1B8.6.0.V01.06.20181213__MRA58K__iCherry_X1\

Done!
Elapsed: 00:11:09

Firmware Infinix X695C NOTE 10 Pro | Infinix_X695C__11__X695C-H854JK-R-GL-211019V307

Product Brand  : Infinix
Product Device : Infinix-X695C
Product Model  : Infinix X695C
Product Name   : X695C-GL
Patch Level    : RP1A.200720.011
Display ID     : X695C-H854JK-R-GL-211019V307
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 19.10.2021
Product Info   : x695_h854
Product Board  : Infinix-X695C
Board Platform : mt6785
Product Manfct : INFINIX MOBILITY LIMITED

Bahan :
1. Download ROM Firmware X695C NOTE 10 Pro Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE :

 boot vol + /-

 Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     CODE : Krug
     TYPE : MODERN [RAPHAEL]
BROM : MEID : B5C0E1AC1F5541EF283C5D448F1370C8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : EE3ED7960722888658B2B8F1BE2FA2B8C7BA183DA10A2D0D8B3A136E9A9683AF
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6785
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x695_h854.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00080000 [ 512.00 KB ]
        DRAM: 0x200000000 [ 8.00 GB ]

        UFS: AD014839485131354146414D42444152
        UFS:
             VEN  : 0x01AD
             VID  : H9HQ15AFAMBDAR
             IFW  : A002
             LU0  : 0x00400000 [ 4.00 MB ]
             LU1  : 0x00400000 [ 4.00 MB ]
             LU2  : 0x1DCB000000 [ 119.17 GB ]
             FSN  : 2010B1B09A80
             REG  : 0x101010000

        CHIP : MT6785 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : FB64510978E1B3D9AE7F76EBE7CC0E4F

DA : USB : HIGH-SPEED

Boot done!

Info : Device support slots
Info : Active slot : a

Product Brand  : Infinix
Product Device : Infinix-X695C
Product Model  : Infinix X695C
Product Name   : X695C-GL
Patch Level    : RP1A.200720.011
Display ID     : X695C-H854JK-R-GL-211019V307
Ver. CodeName  : REL
Ver. Release   : 11
Sec. Patch     : 2021-10-05
Build Time     : 19.10.2021
Product Info   : x695_h854
Product Board  : Infinix-X695C
Board Platform : mt6785
Product Manfct : INFINIX MOBILITY LIMITED

MT6785__INFINIX_MOBILITY_LIMITED__Infinix_X695C__11__X695C-H854JK-R-GL-211019V307__RP1A.200720.011__x695_h854

Read : preloader.bin
Read : proinfo.img
Read : tkv.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : cam_vpu1.img
Read : cam_vpu2.img
Read : cam_vpu3.img
Read : gz.img
Read : lk.bin
Read : logo.bin
Read : boot.img
Read : dtbo.img
Read : tz.img
Read : nvram.bin
Read : super.img
ExtSparse : Compression ratio : 1%
Read : tranfs.img
Read : userdata.img

FW Size  : 7.94 GB
Android Info saved : _Android_info.txt
Scatter  : MT6785_Android_scatter.txt
Saved to : D:\infinix\x695c\MT6785__INFINIX_MOBILITY_LIMITED__Infinix_X695C__11__X695C-H854JK-R-GL-211019V307__RP1A.200720.011__x695_h854\

Done!
Elapsed: 00:15:38

Firmware M11 Ultra PRO Scatter file

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : M11 Ultra Pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106C_P916-M11-Ultra-Pro-FW

 Bahan :
1. Download ROM Firmware Firmware M11 Ultra PRO Scatter file | FIX / REPAIR Blank Putih / White Screen

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 12 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3038470F323732348179
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G80ME
[eMMC] : FLASH_CID : 45010053454D3038470F323732348179
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xFCC4CFBD23AB955CAB6DE235B22BF513
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : x6_v5_x50
ProdModel : M11 Ultra Pro
Device    : x6_v5_x50
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : HY_W106C_P916-M11-Ultra-Pro-FW

[Read Ok] : preloader_x6_v5_x50.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / x6_v5_x50 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 678 MiB
Scatter saved to : E:\New folder\New folder (3)\MT6572__alps__M11_Ultra_Pro__x6_v5_x50__4.4.2__HY_W106C_P916-M11-Ultra-Pro-FW\

All done!

Firmware Infinix X657B Smart 5

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Bahan :
1. Download ROM Firmware Infinix X657B SMART 5 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-

Operation : Read Firmware [ v2.32 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : 9E379253896D0E62883C5030B80DF3B8
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : DA37166FA857A38B35ED1992D66CFB88D208EB05A3CCE2A9F845DABD87AC04DD
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657b_h6117.bin
     EMI : CNT : 000A
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 700100443236303332102E097FDAC7CF
        EMMC: VEN : KINGSTON : OEM : 0 : ID : 443236303332
        EMMC: VEN : KINGSTON : D26032
        EMMC: SNN : 772374490 ( 0x2E097FDA) , MF : 12/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x750000000 [ 29.25 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : ED4F09CDD019FF2FAEDBD75E63C000D3

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X657B
Product Model  : Infinix X657B
Product Name   : X657B-OP-S2
Patch Level    : QP1A.190711.020
Display ID     : X657B-H6117EI-QGo-OP-S2-210302V128
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-03-05
Build Time     : 02.03.2021
Product Info   : x657b_h6117
Product Board  : Infinix-X657B
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 99%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 17%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 2.87 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\X657B\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657B__10__X657B-H6117EI-QGo-OP-S2-210302V128__QP1A.190711.020__x657b_h6117\

Done!
Elapsed: 00:06:42

sumber : https://kangsuper.blogspot.com/2022/01/firmware-infinix-x657b-smart-5.html

Firmware Infinix X657C SMART 5

Product Brand  : Infinix
Product Device : Infinix-X657C
Product Model  : Infinix X657C
Product Name   : X657C-GL
Patch Level    : QP1A.190711.020
Display ID     : X657C-H6117GH-QGo-GL-211018V263
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-10-05
Build Time     : 18.10.2021
Product Info   : x657c_h6117
Product Board  : Infinix-X657C
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657C__10__X657C-H6117GH-QGo-GL-211018V263__QP1A.190711.020__x657c_h6117

Bahan :
1. Download ROM Firmware Infinix X657C SMART 5 Scatter File,

2. Tool pake Infinity CM2 atau Flasher sejenis, blm test pake flashtool

3. Driver bila belum punya instal dulu driver mtknya
4. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

 NOTE : boot vol + /-

Operation : Read Firmware Infinix X657C SMART 5[ v2.31 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
     CODE : Merlot
     TYPE : MODERN [RAPHAEL]
BROM : MEID : E30A7D73401F6772F886DEC9F43C9A0D
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+EXT
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : FBEE723DA4B6EA7E8F2B96A29694FE7A98521801A871EB80EF1BFB15F4A8012B
BROM : SLA : Local Auth
BROM : SLA : Starting Auth
BROM : SLA : Auth Passed!
BROM : SEC : 0x000000E0
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_x657c_h6117.bin
     EMI : CNT : 000B
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x0003A400 [ 233.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: CID : 880103534C44333247550E818324A701
        EMMC: VEN : FORESEE : OEM : 3 : ID : 534C44333247
        EMMC: VEN : FORESEE : SLD32G
        EMMC: SNN : 243368740 ( 0x0E818324) , MF : 10/2020

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x73A000000 [ 28.91 GB ]

        CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 2AB8BE27DECC276999CFED9EFF5FB4CD

DA : USB : HIGH-SPEED

Boot done!

Product Brand  : Infinix
Product Device : Infinix-X657C
Product Model  : Infinix X657C
Product Name   : X657C-GL
Patch Level    : QP1A.190711.020
Display ID     : X657C-H6117GH-QGo-GL-211018V263
Ver. CodeName  : REL
Ver. Release   : 10
Sec. Patch     : 2021-10-05
Build Time     : 18.10.2021
Product Info   : x657c_h6117
Product Board  : Infinix-X657C
Board Platform : mt6761
Product Manfct : INFINIX MOBILITY LIMITED

MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657C__10__X657C-H6117GH-QGo-GL-211018V263__QP1A.190711.020__x657c_h6117

Read : preloader.bin
Read : proinfo.img
Read : persist.img
ExtSparse : Compression ratio : 92%
Read : tkv.img
Read : recovery.img
Read : md1rom.img
Read : spmfw.img
Read : tinysys-scp.bin
Read : sspm.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : dtbo.img
Read : tz.img
Read : vbmeta.img
Read : vbmeta_system.img
Read : vbmeta_vendor.img
Read : super.img
ExtSparse : Compression ratio : 15%
Read : cache.img
Read : tranfs.img
Read : userdata.img

FW Size  : 2.97 GB
Android Info saved : _Android_info.txt
Scatter  : MT6761_Android_scatter.txt
Saved to : D:\infinix\x657c\MT6761__INFINIX_MOBILITY_LIMITED__Infinix_X657C__10__X657C-H6117GH-QGo-GL-211018V263__QP1A.190711.020__x657c_h6117\

Done!
Elapsed: 00:07:11

Firmware Welcome Oppo P48pro | A825C5D_DX_P56_P48PRO_WELCOME_QS_BT15_ER254T

Brand     : alps
ProdName  : P48pro
ProdModel : P48pro
Device    : a82c1_dx_p56
AndroidVer: 10.0
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1
(A82C5D_DX_P56_P48pro_WELCOME_QS_BT15_ER245T_M01_20210310_1049)
build description: a82c1_dx_p56-user 10.0 KOT49H eng.dsxsw05.1615344666 release-keys
build version: A82C5D_DX_P56_P48pro_WELCOME_QS_BT15_ER245T_M01_20210310_1049
lcd: jd9161xx_dsi_vdo nt35512_dsi_vdo

Bahan :
1. Download ROM Firmware Welcome Oppo P48pro Scatter File,

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 20k

Log read Firmware  Welcome Oppo P48pro

Connecting to BootROM…
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
 Hold the VOL UP to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)… Error: timeout
AUTH info: MTK, version: 1
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM…
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
 Hold the VOL UP to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)… Done.
 Detected PreLoader USB VCOM Port (COM4)
 Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom… Done.
Sending Download Agent… Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x70 (Kingston)
Product name: MMC04G (0x4d4d43303447), rev: 0x58, serial number: 0xBFA8571B
Manufacturing date: Sep 2014
CID: 7001004D 4D433034 4758BFA8 571B915D
Capacity: 3.61 GiB(3,871,473,664 bytes)
 Boot1: 2048 KiB
 Boot2: 2048 KiB
 RPMB: 128 KiB
 User area: 3.60 GiB(3,867,148,288 bytes)
USB speed: High-Speed
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: a82c1_dx_p56, name: P48pro
brand: alps, model: P48pro()
build id: KOT49H, version: 10.0 Alpha (A82C5D_DX_P56_P48pro_WELCOME_QS_BT15_ER245T_M01_20210310_1049)
build description: a82c1_dx_p56-user 10.0 KOT49H eng.dsxsw05.1615344666 release-keys
build version: A82C5D_DX_P56_P48pro_WELCOME_QS_BT15_ER245T_M01_20210310_1049
lcd: jd9161xx_dsi_vdo nt35512_dsi_vdo
screen resolution: 960 x 480
main camera: ov2685_mipi_yuv ov2675_mipi_yuv hi258mipi_yuv bf3a20_yuv
 lens: sensordrive
front camera: gc0309sub_yuv bf3703sub_yuv hi253_yuv ov2686sub_yuv
audio: amp_6323pmic_spk
touch: focaltech gsl
modem: a52_we_72_kk_hspa_1258
AUTH info: MTK, version: 1
BROM version[0]: 7.1621.1.0
Loading DA: MTK_AllInOne_DA.bin (5.42 MiB)
 version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM…
 Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable…
 Hold the VOL UP to force MediaTek BootROM.
 Scanning BootROM or Preloader port(30 s)… Done.
 Detected PreLoader USB VCOM Port (COM4)
 Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
 USB Driver: [MediaTek Inc.] usbser, version: 2.0.0.0, date: 12-24-2011
Connecting Bootrom… Done.
Sending Download Agent… Done.
Platform: MT6572_S00, Hw ver: 0xCA00, Sw ver: 0x0000
 Secure ver: 0xFF, BL ver: 0x01
 Secure config: 0x00
 SRAM size: 128 KiB
DRAM size: 512 MiB
PL Secure ver: 0x02
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x70 (Kingston)
Product name: MMC04G (0x4d4d43303447), rev: 0x58, serial number: 0xBFA8571B
Manufacturing date: Sep 2014
CID: 7001004D 4D433034 4758BFA8 571B915D
Capacity: 3.61 GiB(3,871,473,664 bytes)
 Boot1: 2048 KiB
 Boot2: 2048 KiB
 RPMB: 128 KiB
 User area: 3.60 GiB(3,867,148,288 bytes)
USB speed: High-Speed
platform: MT6572, cpu abi: armeabi-v7a
manufacturer: alps
board: a82c1_dx_p56, name: P48pro
brand: alps, model: P48pro()
build id: KOT49H, version: 10.0 Alpha (A82C5D_DX_P56_P48pro_WELCOME_QS_BT15_ER245T_M01_20210310_1049)
build description: a82c1_dx_p56-user 10.0 KOT49H eng.dsxsw05.1615344666 release-keys
build version: A82C5D_DX_P56_P48pro_WELCOME_QS_BT15_ER245T_M01_20210310_1049
lcd: jd9161xx_dsi_vdo nt35512_dsi_vdo
screen resolution: 960 x 480
main camera: ov2685_mipi_yuv ov2675_mipi_yuv hi258mipi_yuv bf3a20_yuv
 lens: sensordrive
front camera: gc0309sub_yuv bf3703sub_yuv hi253_yuv ov2686sub_yuv
audio: amp_6323pmic_spk
touch: focaltech gsl
modem: a52_we_72_kk_hspa_1258
Reading preloader_a82c1_dx_p56.bin… Done.
Reading mbr… Done.
Reading ebr1… Done.
Reading pro_info… Done.
Reading nvram… Done.
Reading protect_f… Done.
Reading protect_s… Done.
Reading seccfg… Done.
Reading uboot.bin… Done.
Reading bootimg.img… Done.
Reading recovery.img… Done.
Reading sec_ro.img… Done.
Reading misc… Done.
Reading logo.bin… Done.
Reading expdb… Done.
Reading android.img… Done.
Reading cache.img… Done.
Reading usrdata.img… Done.
Files saved to \\D:\ANDROID%20LAIN2\wellcome\
Completed in 12 mins 20.435 s

Firmware Philips S562Z | MT6750

Patch Level    : MRA58K
Display ID     : HY71102YW01.V1.02
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-02-05
Build Time     : 24.03.2018
Product Model  : UWEI V1
Product Brand  : UWEI
Product Name   : full_pri6750_66_m
Product Device : pri6750_66_m
Product Manfct : UWEI
Board Platform : mt6750
Product Info   : pri6750_66_m

Bahan :
1. Download ROM Firmware Philipz S562Z Scatter File,

2. Download SP-Flash-Tool Download Disini
3. Driver bila belum punya instal dulu driver mtknya
4. Untuk tutorial flash via Flash tool bisa dilihat DISINI
5. Konfirmasi pass sms / wa only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k

 Operation : Read Firmware Philips S562Z [ v2.28 ]

ExtSparse   : Enabled
ForceRead   : Disabled

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection …

PTFN : MTK USB Port (COM27)
MODE : BOOTROM
PORT : 27
Waiting BOOT ack …
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
     TYPE : MODERN [RAPHAEL]
BROM : MEID : D84927A3B7BE8EE1E295399463245311
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN
BROM : BROM|BL  : 0x05|0xFE
BROM : BOOTROM
BROM : PreBoot stage #1
BROM : PreBoot stage #2
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA …
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA …
BROM : DA sent
BROM :Transfer control to DA …
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : FireFly
     EMI : SRC : preloader_pri6750_66_m.bin
     EMI : CNT : 0001
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA …
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00038000 [ 224.00 KB ]
        DRAM: 0x100000000 [ 4.00 GB ]

        EMMC: CID : 450100444634303634012F03E9C274AF
        EMMC: VEN : SANDISK : OEM : 0 : ID : 444634303634
        EMMC: VEN : SANDISK : DF4064
        EMMC: SNN : 788785602 ( 0x2F03E9C2) , MF : 7/2017

        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 831E0D52E18BDCAEC023CD1227AD8AC1

DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : DA USB VCOM Port (COM28)
MODE : PRELOADER PORT
PORT : 28

Boot done!

Patch Level    : MRA58K
Display ID     : HY71102YW01.V1.02
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-02-05
Build Time     : 24.03.2018
Product Model  : UWEI V1
Product Brand  : UWEI
Product Name   : full_pri6750_66_m
Product Device : pri6750_66_m
Product Manfct : UWEI
Board Platform : mt6750
Product Info   : pri6750_66_m

MT6750__UWEI__UWEI_V1__6.0__HY71102YW01.V1.02__MRA58K__pri6750_66_m

Read : preloader.bin
Read : proinfo.img
Read : recovery.img
Read : md1rom.img
Read : md1dsp.img
Read : md1arm7.img
Read : md3rom.img
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : logo.bin
Read : tz.img
Read : secro.img
Read : system.img
ExtSparse : Compression ratio : 42%
Read : cache.img
Read : userdata.img

FW Size  : 2.15 GB
Android Info saved : _Android_info.txt
Scatter  : MT6750_Android_scatter.txt
Saved to : D:\uwei\MT6750__UWEI__UWEI_V1__6.0__HY71102YW01.V1.02__MRA58K__pri6750_66_m\

Done!
Elapsed: 00:06:26

Firmware ZYREX ZT-216 SPD

 NO SS

File Info
Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand   : zyrex
Device Model   : ZT_216
Device CPU     : sp9832a_2h11_volte
Device IntName : ZT_216
Device Version : 7.0
Device Compile : 3/20/2018 12:30:17 PM
Device Project : MT-704QF_USER_V1_20180320
Device ExtInfo : ZT 216

Bahan :

Tool  :

  1. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  2. Tutorial Flash via research here
  3. Driver SPD by InfinityBox
  4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar SHOPEE PAY / GOPAY 20k


Cara Kerja :

  • BOOT VOLUME -/DOWN

 
 Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 8 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 8 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 8 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC983x eMMC Loader v5.0 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : ZT_216
Model Brand : zyrex
Model Device: ZT_216
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : MT-704QF_USER_V1_20180320
Model Ext   : ZT 216

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : fblogo_1024x600.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2706 MiB
Saved to : E:\zyrex\zt 216\SP9832A_2H11_VOLTE_ZT_216_7.0_MT-704QF_USER_V1_20180320_ZT_216\
Done!