Cara Flash Mito T65

1GT

Model Name : sp7731geaplus_k03_whxmito_64_8_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_64_8
Project Ver : LMY47D release-keys
Model Ext : MITO_T65

Bahan :
1. Download Firmware Mito T65 atau Download Disini

2. Download Research Download R2.10

3. Driver SPD by InfinityBox

4. Tutorial Flash via research here

5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Cara Flash Mito T65 via Research Download

Log Read Firmware Mito T65

Operation : Read FullFlash [ v1.22 ]
1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
==== Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : sp7731geaplus_k03_whxmito_64_8_dt
Model Brand : SPRD
Model Device: scx35_sp7731gea_k03_whxmito_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K03_WHXMITO_64_8
Project Ver : LMY47D release-keys
Model Ext : MITO_T65
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_1024x600.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1730 MiB
Saved to : F:\andro3\mito\mito t65\SP7731GEA_K03_WHXMITO_64_8_scx35_sp7731gea_k03_whxmito_64_8_5.1_LMY47D_release-keys_MITO_T65\
Done!

syarat-dan-ketentuan

Flash Polytron R2501

2501

Polytron R2501 atau Polytron Rocket Lite R2501 juga termasuk hape yg sering mengalami bootloop.

Salah satu solusi untuk mengobati hape anda yg bootloop ataupun matot bisa dengan flashing ataupun terserang virus. Langkah-langkah flashingnya sebagai berikut Lolipop:

  1.  Download firmwarenya stock rom Polytron R2501 ok scatternya  DOWNLOAD DISINI
  2.  Firmware Polytron R2501 Update kangsuper terbaru Download Disini
  3.  Download Flash Toolnya DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi) , Mahar pulsa 10k

Flash Polytron R2501


Log Read Firmware Polytron R2501

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 700100563130303038067E5C672A429D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100563130303038067E5C672A429D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now …
Brand     : POLYTRON
ProdName  : POLYTRON__R2501
ProdModel : POLYTRON R2501
Device    : POLYTRON
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_BIRD6582.WT.A.L
[Read Ok] : preloader_bird6582_wt_a_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img
[ScatCFG] : MT6582 / V1.1.1 / bird6582_wt_a_l / EMMC
FW Size : 1062 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__POLYTRON__POLYTRON_R2501__POLYTRON__5.0__ALPS.L0.MP2.V1_BIRD6582.WT.A.L\
All done!

syarat-dan-ketentuan

Flash Advan S5M Build No: TCK5018A/DR119-03Q/OS4.4.2

Brand     : ADVAN
ProdName  : ADVAN S5M
ProdModel : ADVAN S5M
Device    : hexing82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

Firmware Advan S5M Build No: TCK5018A/DR119-03Q/OS4.4.2

Bahan :

  1.  Download Firmware Advan S5M Build No: TCK5018A/DR119-03Q/OS4.4.2 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Untuk S5M versi lain pass sama dengan diatas
Download TCK5018_S5M_MB_V1.0_4.4.2_B2_V2.6_20141103

Flash Advan S5M via Flash Tool

Log Read Firmware Advan S5M
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201B5AAD04B811F
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201B5AAD04B811F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x933B4DB0C52C5C42FD72FCD1E905FDC5
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : ADVAN S5M
ProdModel : ADVAN S5M
Device    : hexing82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_hexing82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hexing82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 773 MiB
Scatter saved to : F:\andro3\ADVAN\advan s5m TCK5018A DR119-03Q OS 442\MT6582__ADVAN__ADVAN_S5M__hexing82_cwet_kk__4.4.2__ALPS.KK1.MP1.V2.11\
kangsuper.co.id
All done!

Firmware Acer Z500 BI Bahasa Indonesia Dual SIM

Brand     : acer
ProdName  : z500_aap_gen1
ProdModel : Z500
Device    : acer_Z500
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16
Flash Acer Z500 BI Bahasa Indonesia Dual SIM

Bahan :

  1.  Download firmware stock rom Acer Z500 BI Bahasa Indonesia Dual SIM atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log Read Firmware Acer Z500
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265040503A1BBBA61F3
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265040503A1BBBA61F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xBBFBB15227D09C6A4B559AB2E428D3B1
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : acer
ProdName  : z500_aap_gen1
ProdModel : Z500
Device    : acer_Z500
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

[Read Ok] : preloader_aap_gen1.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / aap_gen1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1218 MiB
Scatter saved to : F:\andro3\ACER\z500 bi dual sim\MT6582__acer__Z500__acer_Z500__4.4.2__ALPS.KK1.MP1.V2.16\kangsuper.blogspot.co.id 
All done!

Done!
Elapsed: 00:05:56

Flash Axioo Picophone M1 GEE

Brand     : Axioo
ProdName  : PICOphoneM
ProdModel : PICOphone M1
Device    : PICOphoneM
AndroidVer: 4.2.2
MTKxCPU   : MT6572

KODE GEE silahkan cek di backsticker dibawah imei, pada SN
Bahan :

  1.  Download Axioo Picophone M1 GEE  Stock Rom Backup CM2 Download Disini
  2.  Download Axioo Picophone M1 GEE  Stock Rom Backup UFI Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Axioo Picophone M1 via Flash Tool

Log read firmware Axioo Picophone M1
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393051CF874DA52171
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393051CF874DA52171
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : Axioo
ProdName  : PICOphoneM
ProdModel : PICOphone M1
Device    : PICOphoneM
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : PICOphoneM1_GEE_SW20140327

[Read Ok] : preloader_bird72_wet_a_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / bird72_wet_a_jb3 / EMMC
FW Size : 538 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__Axioo__PICOphone_M1__PICOphoneM__4.2.2__PICOphoneM1_GEE_SW20140327\

All done!

Flash Alcatel 4035X Bahasa Indonesia

Brand     : TCL
ProdName  : 4035X
ProdModel : 4035X
Device    : SOUL4
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1
Flash Alcatel 4035X BI / Bahasa Indonesia

Bahan :

  1.  Download  Firmware Alcatel 4035X
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Alcatel 4035X SP Flash Tool

Log Read Firmware Alcatel 4035X
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35585A4D4201F0B6E069910F
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D4201F0B6E069910F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0x7CA3E03B4E81C4AD31729CDCFF53792D
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : TCL
ProdName  : 4035X
ProdModel : 4035X
Device    : SOUL4
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.KK1.MP6.V1

[Read Ok] : preloader_soul4.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / soul4 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1215 MiB
Scatter saved to : G:\andro3\ALCATEL MTK\MT6572__TCL__4035X__SOUL4__4.4.2__ALPS.KK1.MP6.V1\

All done!

Done!
Elapsed: 00:06:26
Reconnect Power/Cable!

Flash Advan T1L 7001 Build No: P7026/V1.0/KK 4.4.2

 Advan T1L 7001 Build No: P7026/V1.0/KK4.4.2

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1L
Device    : Vandroid
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

Khusus Advan T1L 7001 Build No: P7026/V1.0/KK4.4.2

Bahan :

  1.  Download Advan T1L 7001 Build No: P7026/V1.0/KK 4.4.2 V10
  2.  Link langsung mediafire disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

 Versi Lain Firmware T1L (pass sama dengan file di atas)

Note :
– Yang tidak yakin versinya sama UBOOT / LK di unchek saja
Flash Advan T1L via Flash Tool

Log Read Firmware Advan T1L
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642034140303408167
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642034140303408167
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00000000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : E47C44AD2C829BBA5892D2DF7C231D91
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1L
Device    : Vandroid
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_advan82_7121.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / advan82_7121 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 935 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__ADVAN__T1L__Vandroid__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Flash Maxtron Amor Flash tool

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Maxtron Amor
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Amor via Flash tool

Log Read Firmware Maxtron Amor
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048603A2668090F1
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A2668090F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 115404C62466D68A621B88FE17633564
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 690 MiB
Scatter saved to : G:\andro3\maxtron\amor\MT6572__Maxtron__AMOR__himax_s451_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Flash Accessgo Gotune 3 Tested via Flash Tool

Brand     : ACCESSGO
ProdName  : full_w825_648_aw_loq_accessgo
ProdModel : GOTUNE3
Device    : w825_648_aw_loq_accessgo
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : T825W_648_AW_ACCESSGO_GOTUNE3_V1.5

Bahan :

  1.  Download  Accessgo Gotune 3 V1.5
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Rom versi lain Accessgo Gotune 3
Accessgo Gotune 3 V1.6 Download Disini
Untuk DDR3 :
Accessgo Gotune 3 V1.0 Download Disini
Accessgo Gotune 3 V1.1 Download Disini

Video Flash Accessgo Gotune 3 Tested via Flash Tool

About Accessgo Gotune 3

Log Read Firmware ACCESSGO_GOTUNE3_V1.5
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505072B6A01BEC219
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505072B6A01BEC219
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 85F31BE86802F4F5E62582AE397C92F0
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ACCESSGO
ProdName  : full_w825_648_aw_loq_accessgo
ProdModel : GOTUNE3
Device    : w825_648_aw_loq_accessgo
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : T825W_648_AW_ACCESSGO_GOTUNE3_V1.5

[Read Ok] : preloader_w825_648_aw_loq_accessgo.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / w825_648_aw_loq_accessgo / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1405 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6580__ACCESSGO__GOTUNE3__w825_648_aw_loq_accessgo__5.1__T825W_648_AW_ACCESSGO_GOTUNE3_V1.5\

All done!

Flash Evercoss R50A Winner Y2+ Power

NO PASSWORD
Firmware Evercoss R50A  Winner Y2+ Power
Buat yang Evercoss R50A bootloop matot atau terserang virus

 Download Firmware Evercoss R50A via Mediafre
Bahan :

  1.  Download Firmware Stock Rom Evercoss R50A
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  NoPASSWORD

 Flash Evercoss R50A via Flash Tool