Flash Brandcode B11 ~ Fix LCD Buram After Flash

Brandcode B11 BP237_Brandcode_V2.1_20161119
Model Name  : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext   : B11

Brandcode V2.1 diflash pake V1.0, alhasil LCD jadi Burem kemudian gelap, tapi muncul suara.

Bahan:
1. Download Firmware PAC Brandcode B11

2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Note :
1. BOOT Volume +
2. Samakan versi
3. kalo gak tau versi, mending uncek uboot, boot, logo, erase uboot

Cara Flash  Brancode B11 via Research Download

Log Read Firmware Brandcode B11
Operation : Read FullFlash [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– >Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
– > Wait phone connected …
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : t13_bc_237_64_8_dt
Model Brand : SPRD
Model Device: t13_bc_237_64_8
AndrVersion : 5.1
BaseBand CPU: T13_BC_237_64_8
Project Ver : 20161119
Model Ext   : B11
[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2329 MiB
Saved to : E:\andro 1\brandcode\b11\T13_BC_237_64_8_t13_bc_237_64_8_5.1_20161119_B11\
Done!

Fix Lenovo A7000-a Blank Putih Setelah Flash

Fix Lenovo A7000-a White Screen After Flash
Fix Lenovo A7000-a Blank LCD After Flash

Brand     : Lenovo
ProdName  : aio_row
ProdModel : Lenovo A7000-a
Device    : A7000-a
AndroidVer: 5.0
MTKxCPU   : MT6752
MTKxPRJ   : A7000-a_USR_S137_1505280741_MP6.V3_LENOVO6752_BMAIN_ROW

Bahan :
HARAP DIBACA NOTE DIBAWAH !!!
    1. Rom Buat fix Lenovo A7000-a blank putih after flash (Pilih salah satu saja)

   
    2. Firmware Stock Rom Marshmallow Lenovo A7000-a buat FRP, DKK atau Download Disini
    3. Download Flash Tool DOWNLOAD DISINI
    4. Driver bila belum punya instal dulu driver mtknya
    5. Untuk tutorial flash via Flash tool bisa dilihat DISINI
     Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

     NOTE :
    1. Buat Fix LenovoA7000-a LCD BLANK PUTIH after Flash Pakai file No. 1.1 
    anda bisa pake Firmware Upgrade
    2. WAJIB CENTANG DA DL ALL with Checksum pada Flash tool, kalau tidak A7000-a hanya akan bergetar setelah diflash. Setting : Flashtool=>option=>Download=>centang
    3. Bila pake Rom ke 1.2 yg gak ori, imei akan hilang, untuk Imei Hilang Tinggal write pake Chamelephone (ada di link tutorial), atau pake tool yg lain
    4. Buat FRP Lenovo A7000  bisa menggunakan file yg ke-2, bisa flash FRP only, atau lakukan Full flash, upgrade ke masrshmallow
    5. Buat yg malah Matot tidak getar, masuk tab format, tick validation, auto format & format whole flash, klik start. setelah itu flash centang semua (tested pake rom  no.2 Rom Marshmallow Lenovo A7000-a , bisa jg pake rom lain), jgn lupa centang ceksum, kalau tidak A7000-a hanya akan bergetar setelah diflash.kalau tidak A7000-a hanya akan bergetar setelah diflash.

    Cara Flash  Lenovo A7000 via Flash Tool

    Log Read Firmware Lenovo A7000-a A7000
    Operation : Read Flash [ v1.40 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6752
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6732|MT6752_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 150100523758314D4209D1FFD8FA5241
    DA Stat : v4.2 on BBID : 0x8F
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BM1X7
    [eMMC] : FLASH_CID : 150100523758314D4209D1FFD8FA5241
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : Lenovo
    ProdName  : aio_row
    ProdModel : Lenovo A7000-a
    Device    : A7000-a
    AndroidVer: 5.0
    MTKxCPU   : MT6752
    MTKxPRJ   : A7000-a_USR_S137_1505280741_MP6.V3_LENOVO6752_BMAIN_ROW

    MediaTek MT67xx [x64] : Normalize settings Ok

    [Read Ok] : preloader_aio_row.bin
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : tz1.img
    [Read Ok] : tz2.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6752 / V1.1.2 / aio_row / EMMC
    FW Size : 1937 MiB
    Scatter saved to : G:\InfinityBox\CM2MTK\Flash\lenovo a7000 pl\MT6752__Lenovo__Lenovo_A7000-a__A7000-a__5.0__A7000-a_USR_S137_1505280741_MP6.V3_LENOVO6752_BMAIN_ROW\

    All done!

    Flash Oppo A11W Sticker Besar Getar

    manufacturer: OPPO
    board: OPPO82_15063, name: A11w
    brand: OPPO, model: A11w
    build description: OPPO82_15063-user 4.4.2 KOT49H eng.root.1453439350 dev-keys

    Note :
    Hanya untuk Oppo A11W sticker besar (CE0700 tulisan gede) seperti ss diatas, Oppo A11W belum terformat, atau eror emmc, selain itu direct via UFI saja

    Kasus flash salah versi Oppo a11w jadi getar saja, berulang-ulang getar, untuk kasus lain belum pernah ketemu.

    Cara Flash : Download Only atau menggunakan Firmware Upgrade, Jangan pake format, atau Flash pake file LK/UBOOT, BOOT, LOGO cari yang cocok.

    Bahan :

    1.  Download Firmware Oppo A11W Sticker Besar atau Download Disini
    2.  Download Kumpulan LK BOOT LOGO A11W atau disini
    3.  Download Flash Tool DOWNLOAD DISINI
    4.  Driver bila belum punya instal dulu driver mtknya
    5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Flash Oppo A11W Via Flashtool

    Log Read Firmware Oppo A11W

    Connecting to BootROM…
     Scanning BootROM or Preloader port… Done.
     Detected MTK USB Port (COM4)
    Sending download agent…
    USB speed: USB_FULL_SPEED
    Switching to USB High-Speed…
     Scanning DA USB High-Speed port… Done.
     Detected DA USB VCOM Port (COM5)
    Platform: MT6582_S01, Hw ver: 0xCA01, Sw ver: 0x0001
     Secure ver: 0x05, BL ver: 0x00
     SRAM size: 128 KiB
    DRAM size: 1 GiB
    Card/BGA: BGA (Discrete embedded)
    Manufacturer ID: 0x90 (SK Hynix)
    Product name: H4G2a (0x48344732611100), rev: 0x01, serial number: 0x5618DE18
    Manufacturing date: Nov 1999
    CID: 90014A48 34473261 11015618 DE18B26F
    Capacity: 3.65 GiB(3,921,674,240 bytes)
     Boot1: 4096 KiB
     Boot2: 4096 KiB
     RPMB: 4096 KiB
     User area: 3.64 GiB(3,909,091,328 bytes)
    platform: MT6582, cpu abi: armeabi-v7a
    manufacturer: OPPO
    board: OPPO82_15063, name: A11w
    brand: OPPO, model: A11w
    build id: KOT49H, version: 4.4.2 (A11wEX_11_160122)
    build description: OPPO82_15063-user 4.4.2 KOT49H eng.root.1453439350 dev-keys
    build version: A11wEX_11_A.09_160122
    lcd: qhd_hx8389_13059
    screen resolution: 854 x 480
    main camera: ov5648_mipi_raw
     lens: dummy_lens
    front camera: hi258_mipi_yuv
    audio: amp_yad
    touch: gt9xx_15063
    modem: OPPO82_hspa_15063
    Reading preloader_oppo82_15063.bin… Done.
    Reading mbr… Done.
    Reading ebr1… Done.
    Reading pro_info… Done.
    Reading nvram… Done.
    Reading protect_f… Done.
    Reading protect_s… Done.
    Reading seccfg… Done.
    Reading lk.bin… Done.
    Reading boot.img… Done.
    Reading recovery.img… Done.
    Reading secro.img… Done.
    Reading misc… Done.
    Reading logo.bin… Done.
    Reading ebr2… Done.
    Reading oppo_custom.img… Done.
    Reading reserve1… Done.
    Reading reserve2… Done.
    Reading expdb… Done.
    Reading system.img… Done.
    Reading cache.img… Done.
    Reading userdata.img… Done.
    Files saved to \\%BACKUPS%\Oppo\A11W%20(Joy_3)\tulisann%20gede\
    Completed in 18 mins 6.094 s