Flash Polytron R2501

2501

Polytron R2501 atau Polytron Rocket Lite R2501 juga termasuk hape yg sering mengalami bootloop.

Salah satu solusi untuk mengobati hape anda yg bootloop ataupun matot bisa dengan flashing ataupun terserang virus. Langkah-langkah flashingnya sebagai berikut Lolipop:

  1.  Download firmwarenya stock rom Polytron R2501 ok scatternya  DOWNLOAD DISINI
  2.  Firmware Polytron R2501 Update kangsuper terbaru Download Disini
  3.  Download Flash Toolnya DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi) , Mahar pulsa 10k

Flash Polytron R2501


Log Read Firmware Polytron R2501

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CB00
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 700100563130303038067E5C672A429D
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 80001
[eMMC] : FLASH_CID : 700100563130303038067E5C672A429D
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001C3000000
[eMMC] : FLASH_UCP : 7216 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Conent now …
Brand     : POLYTRON
ProdName  : POLYTRON__R2501
ProdModel : POLYTRON R2501
Device    : POLYTRON
AndroidVer: 5.0
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.L0.MP2.V1_BIRD6582.WT.A.L
[Read Ok] : preloader_bird6582_wt_a_l.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img
[ScatCFG] : MT6582 / V1.1.1 / bird6582_wt_a_l / EMMC
FW Size : 1062 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__POLYTRON__POLYTRON_R2501__POLYTRON__5.0__ALPS.L0.MP2.V1_BIRD6582.WT.A.L\
All done!

syarat-dan-ketentuan

Flash Advan S5M Build No: TCK5018A/DR119-03Q/OS4.4.2

Brand     : ADVAN
ProdName  : ADVAN S5M
ProdModel : ADVAN S5M
Device    : hexing82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

Firmware Advan S5M Build No: TCK5018A/DR119-03Q/OS4.4.2

Bahan :

  1.  Download Firmware Advan S5M Build No: TCK5018A/DR119-03Q/OS4.4.2 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Untuk S5M versi lain pass sama dengan diatas
Download TCK5018_S5M_MB_V1.0_4.4.2_B2_V2.6_20141103

Flash Advan S5M via Flash Tool

Log Read Firmware Advan S5M
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004B3758564D4201B5AAD04B811F
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D4201B5AAD04B811F
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0x933B4DB0C52C5C42FD72FCD1E905FDC5
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : ADVAN S5M
ProdModel : ADVAN S5M
Device    : hexing82_cwet_kk
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_hexing82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / hexing82_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 773 MiB
Scatter saved to : F:\andro3\ADVAN\advan s5m TCK5018A DR119-03Q OS 442\MT6582__ADVAN__ADVAN_S5M__hexing82_cwet_kk__4.4.2__ALPS.KK1.MP1.V2.11\
kangsuper.co.id
All done!

Firmware Acer Z500 BI Bahasa Indonesia Dual SIM

Brand     : acer
ProdName  : z500_aap_gen1
ProdModel : Z500
Device    : acer_Z500
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16
Flash Acer Z500 BI Bahasa Indonesia Dual SIM

Bahan :

  1.  Download firmware stock rom Acer Z500 BI Bahasa Indonesia Dual SIM atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Log Read Firmware Acer Z500
Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4841473265040503A1BBBA61F3
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265040503A1BBBA61F3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xBBFBB15227D09C6A4B559AB2E428D3B1
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : acer
ProdName  : z500_aap_gen1
ProdModel : Z500
Device    : acer_Z500
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

[Read Ok] : preloader_aap_gen1.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / aap_gen1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1218 MiB
Scatter saved to : F:\andro3\ACER\z500 bi dual sim\MT6582__acer__Z500__acer_Z500__4.4.2__ALPS.KK1.MP1.V2.16\kangsuper.blogspot.co.id 
All done!

Done!
Elapsed: 00:05:56

Flash AsiaFone AF9899 ( CGN )

Brand     : ASIAFONE
ProdName  : AF9899
ProdModel : AF9899
Device    : AF9899
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

Bahan :

  1.  Download Firmware Asiafone AF9899 (CGN) DOWNLOAD DISINI
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Asiafone AF9899 CGN Via Flashtool

Log Read Firmware AsiaFone AF9899 ( CGN )

Operation : Read Flash [ v1.50 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034472825565E185125
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034472825565E185125
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x7B08506B1E316FAA8EB27C35A1964EC6
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ASIAFONE
ProdName  : AF9899
ProdModel : AF9899
Device    : AF9899
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.16

[Read Ok] : preloader_i31_xfy.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / i31_xfy / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 680 MiB
Scatter saved to : F:\andro3\ASIAFONE\asiafone af9899\MT6582__ASIAFONE__AF9899__AF9899__4.4.2__ALPS.KK1.MP1.V2.16\kangsuper.blogspot.co.id
 All done!

Done!
Elapsed: 00:05:34

Flash Asiafone AF9880 DCN

Brand     : alps
ProdName  : a500_emmc
ProdModel : ASIAFONE AF9880
Device    : a500_emmc
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

Bahan :

  1.  Download Firmware Asiafone AF9880 DCN scatter full backup  Download DISINI
  2.  Download Firmware Asiafone AF9880 DCN  Download DISINI
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Asiafone AF9880 DCN Via Flashtool

Log Read Firmware Asiafone AF9880 DCN

Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : FE014E503058585858106859F9E721DD
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0xFE , OEM : 014E
[eMMC] : FLASH_INF : [MICRON] , XXXX0
[eMMC] : FLASH_CID : FE014E503058585858106859F9E721DD
[eMMC] : FLASH_BRT : 0x00100000 , 0x00100000 , 0x00100000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 51292596F0F669EC038F47C047424824
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : a500_emmc
ProdModel : ASIAFONE AF9880
Device    : a500_emmc
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

[Read Ok] : preloader_a500_emmc.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / a500_emmc / EMMC
Android Info saved
HWConfig Info saved
FW Size : 689 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__alps__ASIAFONE_AF9880__a500_emmc__4.2.2__ALPS.JB3.MP.V1.6\

All done!

Done!
Elapsed: 00:03:48

Flash Axioo Picophone M1 GEE

Brand     : Axioo
ProdName  : PICOphoneM
ProdModel : PICOphone M1
Device    : PICOphoneM
AndroidVer: 4.2.2
MTKxCPU   : MT6572

KODE GEE silahkan cek di backsticker dibawah imei, pada SN
Bahan :

  1.  Download Axioo Picophone M1 GEE  Stock Rom Backup CM2 Download Disini
  2.  Download Axioo Picophone M1 GEE  Stock Rom Backup UFI Download Disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Axioo Picophone M1 via Flash Tool

Log read firmware Axioo Picophone M1
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393051CF874DA52171
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 11010030303447393051CF874DA52171
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : Axioo
ProdName  : PICOphoneM
ProdModel : PICOphone M1
Device    : PICOphoneM
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : PICOphoneM1_GEE_SW20140327

[Read Ok] : preloader_bird72_wet_a_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / bird72_wet_a_jb3 / EMMC
FW Size : 538 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6572__Axioo__PICOphone_M1__PICOphoneM__4.2.2__PICOphoneM1_GEE_SW20140327\

All done!

Flash Advan T1L 7001 Build No: P7026/V1.0/KK 4.4.2

 Advan T1L 7001 Build No: P7026/V1.0/KK4.4.2

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1L
Device    : Vandroid
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

Khusus Advan T1L 7001 Build No: P7026/V1.0/KK4.4.2

Bahan :

  1.  Download Advan T1L 7001 Build No: P7026/V1.0/KK 4.4.2 V10
  2.  Link langsung mediafire disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

 Versi Lain Firmware T1L (pass sama dengan file di atas)

Note :
– Yang tidak yakin versinya sama UBOOT / LK di unchek saja
Flash Advan T1L via Flash Tool

Log Read Firmware Advan T1L
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 8801034E436172642034140303408167
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x88 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642034140303408167
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00000000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]
DEV RID    : E47C44AD2C829BBA5892D2DF7C231D91
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1L
Device    : Vandroid
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_advan82_7121.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / advan82_7121 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 935 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6582__ADVAN__T1L__Vandroid__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Flash Maxtron Amor Flash tool

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Maxtron Amor
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Amor via Flash tool

Log Read Firmware Maxtron Amor
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048603A2668090F1
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A2668090F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 115404C62466D68A621B88FE17633564
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 690 MiB
Scatter saved to : G:\andro3\maxtron\amor\MT6572__Maxtron__AMOR__himax_s451_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Flash Accessgo Gotune 3 Tested via Flash Tool

Brand     : ACCESSGO
ProdName  : full_w825_648_aw_loq_accessgo
ProdModel : GOTUNE3
Device    : w825_648_aw_loq_accessgo
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : T825W_648_AW_ACCESSGO_GOTUNE3_V1.5

Bahan :

  1.  Download  Accessgo Gotune 3 V1.5
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Rom versi lain Accessgo Gotune 3
Accessgo Gotune 3 V1.6 Download Disini
Untuk DDR3 :
Accessgo Gotune 3 V1.0 Download Disini
Accessgo Gotune 3 V1.1 Download Disini

Video Flash Accessgo Gotune 3 Tested via Flash Tool

About Accessgo Gotune 3

Log Read Firmware ACCESSGO_GOTUNE3_V1.5
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A483847316505072B6A01BEC219
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505072B6A01BEC219
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 85F31BE86802F4F5E62582AE397C92F0
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand     : ACCESSGO
ProdName  : full_w825_648_aw_loq_accessgo
ProdModel : GOTUNE3
Device    : w825_648_aw_loq_accessgo
AndroidVer: 5.1
MTKxCPU   : MT6580
MTKxPRJ   : T825W_648_AW_ACCESSGO_GOTUNE3_V1.5

[Read Ok] : preloader_w825_648_aw_loq_accessgo.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / w825_648_aw_loq_accessgo / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1405 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6580__ACCESSGO__GOTUNE3__w825_648_aw_loq_accessgo__5.1__T825W_648_AW_ACCESSGO_GOTUNE3_V1.5\

All done!

Flash Advan T5-B

Advan T5-B Build Number P8000/V13/ICS 4.0.4 Model P6770

Brand     : alps
ProdName  : T5-B
ProdModel : T5-B
Device    : advan77_6770
AndroidVer: 4.0.4
MTKxCPU   : MT6577
MTKxPRJ   : ALPS.ICS2.MP.V1.3
Bahan :

  1.  Download Firmware Advan T5-B Build Number P8000/V13/ICS 4.0.4 
  2.  Link langsung mediafire disini
  3.  Download Flash Tool DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Advan T5-B Build Number P8000/V13/ICS 4.0.4 Model P6770

Read Firmware Advan T5-B
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6575
BB_CPU_NME : [MediaTek] MT6575|MT6577_S00
BB_CPU_EXT : 0xCB00 , 0x8B00 , 0xE201
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x0F
WD Disable stat : 0x0000
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.3.2 on BBID : 0x84
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A483447316404860BA2ECF39033
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 2147E52FFCD8D8DD31F2C52DFE822654
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : alps
ProdName  : T5-B
ProdModel : T5-B
Device    : advan77_6770
AndroidVer: 4.0.4
MTKxCPU   : MT6577
MTKxPRJ   : ALPS.ICS2.MP.V1.3

[Read Ok] : preloader_advan77_6770.bin
[Read Ok] : DSP_BL
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6577 / V1.0.0 / advan77_6770 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 419 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6577__alps__T5-B__advan77_6770__4.0.4__ALPS.ICS2.MP.V1.3\

All done!