Flash Mito A260 Kitkat & Lolypop

Model Name  : MITO_A260
Model Brand : MITO
Model Device: MITO_A260
AndrVersion : 4.4.2
BaseBand CPU: H620
Project Ver : MITO_A260_20150612_T04
Model Ext   : MITO_A260

Mito A260 KitKat T04 Disticker backcasing V3
Mito A260 KitKat T07 Disticker backcasing V2

Bahan :

  1.  Download Firmware PAC Mito A260 KitKat T04 atau  Download Disini
  2.  Download Firmware PAC Mito A260 KitKat T07 atau  Download Disini
  3.  Download Firmware PAC Mito A260 Lolypop T09 atau  Download Disini
  4.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  5.  Driver SPD by InfinityBox
  6.  Tutorial Flash via research here
  7.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Error pada research download baca disini

Note :
1. Boot Volume DOWN

Cara Flash Mito A260 via Research Download

Log Read Firmware Mito A260
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
 ====  Wait for phone…
Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name  : MITO_A260
Model Brand : MITO
Model Device: MITO_A260
AndrVersion : 4.4.2
BaseBand CPU: H620
Project Ver : MITO_A260_20150612_T04
Model Ext   : MITO_A260
[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W14.50_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 907 MiB
Saved to : E:\andro 1\mito\MITO A260\H620_MITO_A260_4.4.2_MITO_A260_20150612_T04_MITO_A260\
Done!

Flash Alcatel IDOL X+ 6043D KitKat 4.4.2

Brand     : TCT
ProdName  : 6043D
ProdModel : 6043D
Device    : DIABLOXPLUS
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.10

Bahan :

  1.  Download Firmware Alcatel IDOL X+ 6043D KitKat 4.4.2 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Flash Alcatel IDOLX+ 6043D KitKat 4.4.2 Flash Tool

Log Read Firmware Alcatel IDOLX+ 6043D KitKat 4.4.2

Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6592
BB_CPU_NME : [MediaTek] MT6592_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x8A
NAND Flash : NOT INSTALLED
eMMC Flash : 15010052345A314D4202278356652173
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM1Z4
[eMMC] : FLASH_CID : 15010052345A314D4202278356652173
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : ED376F5F90C2B03866A001BE8E085698
INT RAM    : 0x00020000
EXT RAM    : 0x80000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : TCT
ProdName  : 6043D
ProdModel : 6043D
Device    : DIABLOXPLUS
AndroidVer: 4.4.2
MTKxCPU   : MT6592
MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_jrdsh92_wet_jb9.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / jrdsh92_wet_jb9 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1760 MiB
Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6592__TCT__6043D__DIABLOXPLUS__4.4.2__ALPS.KK1.MP1.V2.10\

All done!

Flash Hummer H5 KitKat

Brand     : HUMMER H5
ProdName  : HUMMER H5
ProdModel : HUMMER H5
Device    : hongyu72_wet_jb3
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.8
Firmware Hummer H5 KitKat  via Flash tool

Bahan :

  1.  Download Firmware Stock Rom Hummer H5 KitKat
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Hummer H5 KitKat  via Flash tool

Tentang Hummer H5

Log Read Firmware Hummer H5
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 7001004D4D4330344758F7B1DD56910F
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , G40CM
[eMMC] : FLASH_CID : 7001004D4D4330344758F7B1DD56910F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000000E6800000
[eMMC] : FLASH_UCP : 3688 MiB [eMMC 4 GiB]
DEV RID    : 1543A5DFEA29DDD3BEC12A1B0EC22260
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : HUMMER H5
ProdName  : HUMMER H5
ProdModel : HUMMER H5
Device    : hongyu72_wet_jb3
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.8

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 683 MiB
Scatter saved to : G:\andro3\HUMMER H5\MT6572__HUMMER_H5__HUMMER_H5__hongyu72_wet_jb3__4.4.2__ALPS.JB3.MP.V1.8\

All done!

Done!
Elapsed: 00:03:40

Flash Mito A313 Flash Tool

Created by Infinity-Box (c) Chinese Miracle II (c) 2016
Device Brand   : MITO
Device Model   : hct72_cwet_lca
Device CPU     : MT6572
Device IntName : hct72_cwet_lca
Device Version : 4.4.2
Device Compile : 9/25/2014 2:52:29 AM
Device Project : MITO_A313_R09
Device ExtInfo : MITO A313

Bahan :

  1.  Download firmware stock rom Mito A313 DOWNLOAD DISINI
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5. Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Mito A313 via Flash Tool

About Mito A313

Log Read Firmware Mito A313
Operation : Read Flash [ v1.43 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 000100BC009000550056000100BC0000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x00A6 , [Spansion] KEM51200_NADGSBXM2C32
[NAND] : FLASH_DIE : 0001 00BC 0090 0055 0056 0001 00BC
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 0800/0040/01/NIM_Px-2
DEV RID    : 3C0498AAD83478596A2D4CC27BFF6549
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

[Read Ok] : preloader_hct72_cwet_lca.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / hct72_cwet_lca / NAND
FW Size : 345 MiB

Brand     : MITO
ProdName  : hct72_cwet_lca
ProdModel : MITO A313
Device    : hct72_cwet_lca
AndroidVer: 4.4.2
MTKxCPU   : MT6572
MTKxPRJ   : MITO_A313_R09

Android Info saved

Scatter saved to : G:\andro3\mito\mito a313\MT6572_NAND_MITO__MITO A313__hct72_cwet_lca__4.4.2__MITO_A313_R09

Done!

FLASH ASIAFONE AF9889 via FLASH TOOL

Brand     : AF9889
ProdName  : AF9889
ProdModel : AF9889
Device    : AF9889
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

FLASH ASIAFONE AF9889 MT6572 via FLASH TOOL

Bahan :

  1.  Download firmwarenya STOCK ROM ASIAFONE AF9889
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

FLASH AF9889 via SPFT

LOG READ INFO AF9889 via CM2
Start  at : [1/27/2016 / 10:33:38 PM]
Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D42019204E4075149
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42019204E4075149
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : AF9889
ProdName  : AF9889
ProdModel : AF9889
Device    : AF9889
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

EXTRA :
LCD [0] : nt35512_dsi_vdo_hongsheng
LCD [1] : ili9806e_dsi_vdo_wqx
LCD [2] : otm8018b_dsi_vdo_s4501_xinqi
LCD Res : 854×480
TOUCH [0] : ft6306_s4501
CAM [0] : ov5645_mipi_yuv
CAM [1] : s5k4ecgx_mipi_yuv
CAM [2] : gc2035_yuv_s4501
CAM [3] : gc0329_yuv_s4501
CAM [4] : gc0328_yuv
CAM [5] : gc2035f_yuv
MODEM : mtk72_wet_jb3_hspa_p17
LOCALE : zh_CN en_US es_ES zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR af_AF am_ET be_BY bg_BG bn_IN ca_ES da_DK et_EE fa_IR fi_FI hi_IN hr_HR ja_JP lt_LT lv_LV nb_NO pl_PL rm_CH sl_SI sk_SK sr_YU sw_TZ sv_SE uk_UA ur_PK zu_ZA hdpi

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!

Finish at : [1/27/2016 / 10:33:46 PM]


LOG READ FIRMWARE AF9889 via CM2
Start  at : [1/27/2016 / 10:43:37 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35585A4D42019204E4075149
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZX5
[eMMC] : FLASH_CID : 1501004E35585A4D42019204E4075149
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : AF9889
ProdName  : AF9889
ProdModel : AF9889
Device    : AF9889
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.6

[Read Ok] : preloader_s4501_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / s4501_jb3 / EMMC
FW Size : 680 MiB
Scatter saved to : G:\andro3\asiafone af9889\MT6572__AF9889__AF9889__AF9889__4.2.2__ALPS.JB3.MP.V1.6\

All done!

Done!
Elapsed: 00:03:28
Reconnect Power/Cable!

Finish at : [1/27/2016 / 10:47:05 PM]

INFO AF9889 SCATTER

######################################-=INFINITY-BOX=-######################################################
#
#  General Setting
#
####################################-=CHINESE MIRACLE=-#####################################################
– general: MTK_PLATFORM_CFG
  info:
    – config_version: V1.1.1
      platform: MT6572
      project: s4501_jb3
      storage: EMMC
      boot_channel: MSDC_0
      block_size: 0x20000
############################################################################################################
#
#  Layout Setting
#
############################################################################################################
– partition_index: SYS0
  partition_name: PRELOADER
  file_name: preloader_s4501_jb3.bin
  is_download: true
  type: SV5_BL_BIN
  linear_start_addr: 0x0
  physical_start_addr: 0x0
  partition_size: 0x880000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BOOTLOADERS
  reserve: 0x00

– partition_index: SYS1
  partition_name: MBR
  file_name: MBR
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x880000
  physical_start_addr: 0x880000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS2
  partition_name: EBR1
  file_name: EBR1
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x900000
  physical_start_addr: 0x900000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS3
  partition_name: PRO_INFO
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x980000
  physical_start_addr: 0x980000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS4
  partition_name: NVRAM
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xC80000
  physical_start_addr: 0xC80000
  partition_size: 0x500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: BINREGION
  reserve: 0x00

– partition_index: SYS5
  partition_name: PROTECT_F
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1180000
  physical_start_addr: 0x1180000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS6
  partition_name: PROTECT_S
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x1B80000
  physical_start_addr: 0x1B80000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: PROTECTED
  reserve: 0x00

– partition_index: SYS7
  partition_name: SECCFG
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x2580000
  physical_start_addr: 0x2580000
  partition_size: 0x20000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS8
  partition_name: UBOOT
  file_name: lk.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x25A0000
  physical_start_addr: 0x25A0000
  partition_size: 0x60000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS9
  partition_name: BOOTIMG
  file_name: boot.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2600000
  physical_start_addr: 0x2600000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS10
  partition_name: RECOVERY
  file_name: recovery.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x2C00000
  physical_start_addr: 0x2C00000
  partition_size: 0x600000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS11
  partition_name: SEC_RO
  file_name: secro.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x3200000
  physical_start_addr: 0x3200000
  partition_size: 0x40000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS12
  partition_name: MISC
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x3240000
  physical_start_addr: 0x3240000
  partition_size: 0x80000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS13
  partition_name: LOGO
  file_name: logo.bin
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x32C0000
  physical_start_addr: 0x32C0000
  partition_size: 0x300000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS14
  partition_name: EXPDB
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0x35C0000
  physical_start_addr: 0x35C0000
  partition_size: 0xA00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: INVISIBLE
  reserve: 0x00

– partition_index: SYS15
  partition_name: ANDROID
  file_name: system.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x3FC0000
  physical_start_addr: 0x3FC0000
  partition_size: 0x28A00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS16
  partition_name: CACHE
  file_name: cache.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x2C9C0000
  physical_start_addr: 0x2C9C0000
  partition_size: 0x17800000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS17
  partition_name: USRDATA
  file_name: userdata.img
  is_download: true
  type: EXT4_IMG
  linear_start_addr: 0x441C0000
  physical_start_addr: 0x441C0000
  partition_size: 0x52C00000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS18
  partition_name: FAT
  file_name: fat.img
  is_download: true
  type: NORMAL_ROM
  linear_start_addr: 0x96DC0000
  physical_start_addr: 0x96DC0000
  partition_size: 0x515C0000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: true
  is_reserved: false
  operation_type: UPDATE
  reserve: 0x00

– partition_index: SYS19
  partition_name: BMTPOOL
  file_name: NONE
  is_download: false
  type: NORMAL_ROM
  linear_start_addr: 0xFFFF00A8
  physical_start_addr: 0xFFFF00A8
  partition_size: 0x1500000
  region: EMMC_USER
  storage: HW_STORAGE_EMMC
  boundary_check: false
  is_reserved: true
  operation_type: RESERVED
  reserve: 0x00

FLASH ADVAN T1S build no : P7021/V2.0/KK4.4.2

Flash advan tablet T1S build no : P7021/V2.0/KK4.4.2
  1.  Download firmwarenya STOCK ROM ADVAN TABLET T1S V12
  2. Download firmwarenya STOCK ROM ADVAN TABLET T1S V15
  3.  Download Flash Toolnya DOWNLOAD DISINI
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  6.  SCATTER AJA
  7. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
pic log read advan t1s via cm2
 about advan t1s
 advan tablet T1S build no : P7021/V2.0/KK4.4.2
 LOG READ AND INFO ADVAN TABLET T1S VIA CM2
advan tablet T1S build no : P7021/V2.0/KK4.4.2
 Start  at : [2/21/2016 / 10:58:02 PM]

Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4E0301886472614308AA3520DF82600B
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642035AA080B6082DF
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1S
Device    : advan89_6833
AndroidVer: 4.4.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.KK1.MP5.V1.25

MODEM :
BaseBand  : MT6589_S00_MOLY_WR8_W1248_MD_WG_MP_V50_P1_1_3g_n

EXTRA :
LCD [0] : KR070IG1T
LCD Res : 600×1024
TOUCH [0] : GT9XX
CAM [0] : gc0329_yuv
CAM [1] : gc0312_yuv
MODEM : miki89_tb_kk_md1_hspa_850_1900_2100_vanchip
LOCALE : in_ID en_US zh_CN zh_TW en_IN fr_FR it_IT es_ES et_EE de_DE nl_NL cs_CZ pl_PL ja_JP zh_HK ru_RU ko_KR nb_NO es_US da_DK el_GR tr_TR pt_PT pt_BR rm_CH sv_SE bg_BG ca_ES en_GB fi_FI hi_IN hr_HR hu_HU iw_IL lt_LT lv_LV ro_RO sk_SK sl_SI sr_RS uk_UA vi_VN tl_PH ar_EG fa_IR th_TH sw_TZ ms_MY af_ZA zu_ZA am_ET en_XA ar_XB fr_CA km_KH lo_LA ne_NP mn_MN hy_AM az_AZ ka_GE

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!

Finish at : [2/21/2016 / 10:58:11 PM]



Start  at : [2/21/2016 / 11:22:28 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4E0301886472614308AA3520DF82600B
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0088 , OEM : 0103
[eMMC] : FLASH_INF : [FORESEE] , draC
[eMMC] : FLASH_CID : 8801034E436172642035AA080B6082DF
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00020000
[eMMC] : FLASH_LEN : 0x00000001CE100000
[eMMC] : FLASH_UCP : 7393 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : ADVAN
ProdName  : Vandroid
ProdModel : T1S
Device    : advan89_6833
AndroidVer: 4.4.2
MTKxCPU   : MT6589
MTKxPRJ   : ALPS.KK1.MP5.V1.25

[Read Ok] : preloader_advan89_6833.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6589 / V1.0.0 / advan89_6833 / EMMC
FW Size : 932 MiB
Scatter saved to : G:\andro3\ADVAN\advan tab t1s\MT6589__ADVAN__T1S__advan89_6833__4.4.2__ALPS.KK1.MP5.V1.25\




SCATTER ADVAN T1S

PRELOADER 0x0

{
}
MBR 0x1000000
{
}
EBR1 0x1080000
{
}
__NODL_PMT 0x1100000
{
}
__NODL_PRO_INFO 0x1500000
{
}
__NODL_NVRAM 0x1800000
{
}
__NODL_PROTECT_F 0x1D00000
{
}
__NODL_PROTECT_S 0x2700000
{
}
__NODL_SECCFG 0x3100000
{
}
UBOOT 0x3120000
{
}
BOOTIMG 0x3180000
{
}
RECOVERY 0x4180000
{
}
SEC_RO 0x5180000
{
}
__NODL_MISC 0x5780000
{
}
LOGO 0x5800000
{
}
EBR2 0x5B00000
{
}
__NODL_EXPDB 0x5B80000
{
}
ANDROID 0x6580000
{
}
CACHE 0x46580000
{
}
USRDATA 0x4E380000
{
}
__NODL_FAT 0x10E380000
{
}
__NODL_BMTPOOL 0xFFFF00A8
{
}

FLASH EVERCOSS A7E+ HELLO KITTY

Brand     : EVERCOSS
ProdName  : A7E+
ProdModel : A7E+
Device    : A7E+
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

FLASH EVERCOSS A7E+ HELLO KITTY menggunakan firmware ori atau stock rom dengan menggunakan flashtool :

  1.  Download firmware STOCK ROM EVERCOSS A7E+ HELLO KITTY
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  Konfirmasi pass sms only 0896-1384-0593 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 info versi



flash via sp flashtool

 



Log Read Firmware

Start  at : [2/1/2016 / 11:27:12 PM]
Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3038470F323732348179
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G80ME
[eMMC] : FLASH_CID : 45010053454D3038470F323732348179
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : EVERCOSS
ProdName  : A7E+
ProdModel : A7E+
Device    : A7E+
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

MODEM :
BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V35_P4_1_wg_n

EXTRA :
LCD [0] : nt35512_wvga_dsi_vdo_3823
LCD [1] : ili9806e_wvga_3823
LCD [2] : hx8379c_dsi_vdo_3823
LCD Res : 800×480
TOUCH [0] : gt9xx_hotknot_3823
CAM [0] : ov5648_mipi_raw_3823
CAM [1] : gc5004_mipi_raw
CAM [2] : gc0339_mipi_raw
CAM [3] : gc0310mipi_yuv
MODEM : miki82_tb_kk_hspa_2100
LOCALE : en_US en_IN fr_FR it_IT es_ES et_EE de_DE nl_NL cs_CZ pl_PL ja_JP zh_TW zh_CN zh_HK ru_RU ko_KR nb_NO es_US da_DK el_GR tr_TR pt_PT pt_BR rm_CH sv_SE bg_BG ca_ES en_GB fi_FI hi_IN hr_HR hu_HU in_ID iw_IL lt_LT lv_LV ro_RO sk_SK sl_SI sr_RS uk_UA vi_VN tl_PH ar_EG fa_IR th_TH sw_TZ ms_MY af_ZA zu_ZA am_ET en_XA ar_XB fr_CA km_KH lo_LA ne_NP mn_MN hy_AM az_AZ ka_GE

Done!
Elapsed: 00:00:10
Reconnect Power/Cable!

Finish at : [2/1/2016 / 11:27:23 PM]

Start  at : [2/1/2016 / 11:39:41 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3038470F323732348179
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G80ME
[eMMC] : FLASH_CID : 45010053454D3038470F323732348179
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : EVERCOSS
ProdName  : A7E+
ProdModel : A7E+
Device    : A7E+
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_cross82_3823b.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / cross82_3823b / EMMC
FW Size : 936 MiB
Scatter saved to : F:\at7e+HK\MT6582__EVERCOSS__A7E+__A7E+__4.4.2__ALPS.KK1.MP1.V2.11\

All done!
 


FLASH VIVO Y15 KITKAT 4.4.2

Vivo Y15 versi kitkat 4.4.2 , klo firmware yang PD1304BW_EX_A_2.5.1-update-full.zip masih JB 4.2.2. Buat flash pasti gagal. Tampilan recovery seperti ini : ALPS.KK1.MP1.V2.46

PASSWORD : vivoy15kkjanuari 


  1.  Download firmwarenya stock rom DOWNLOAD DISINI atau Download Disini
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5. PASSWORD : vivoy15kkjanuari 



GAMBAR STICKER BODY BELAKANG VIVO Y15 KITKAT






FLASH VIVO Y15 KITKAT VIA FLASHTOOL

 



Start  at : [1/26/2016 / 11:43:13 PM]
Operation : Check / Read Info [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040505A2DA1442CD
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040505A2DA1442CD
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : vivo
ProdName  : Y15
ProdModel : vivo Y15
Device    : Y15
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.46

MODEM :
BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V62_P8_1_wg_n

EXTRA :
LCD [0] : PD1304CT_TM_NT35510
LCD [1] : PD1304CT_BYD_NT35510
LCD [2] : PD1304CT_default
LCD Res : 854×480
TOUCH [0] : ft5336
CAM [0] : ov5648_mipi_raw
CAM [1] : hi255a_mipi_yuv
MODEM : mt6582_demo_hspa_sky_18_PD1304CW_EX
LOCALE : en_US es_ES zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB

Done!
Elapsed: 00:00:24

Chinese Miracle II  [MTK module] v 1.40

Start  at : [1/27/2016 / 2:26:32 AM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164040505A2DA1442CD
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164040505A2DA1442CD
[eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : vivo
ProdName  : Y15
ProdModel : vivo Y15
Device    : Y15
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.46

[Read Ok] : preloader_bbk82_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / bbk82_cwet_kk / EMMC
FW Size : 1377 MiB
Scatter saved to : G:\InfinityBox\CM2MTK\Flash\normal\MT6582__vivo__vivo_Y15__Y15__4.4.2__ALPS.KK1.MP1.V2.46\

All done!