Cara Flash & BYPASS FRP Advan S5E-NXT V1.6 & V2.0 ~ LOCK AKUN GOOGLE

Model Name  : revo_xx08
Model Brand : ADVAN
Model Device: S5E_NXT
AndrVersion : 5.1
BaseBand CPU: SP7731CEA
CompileDate : 10/24/2016 2:16:39 AM
Project Ver : TCS5056A_ADVAN_S5E_NXT_V1.6_20161024
Model Ext   : S5E_NXT

S5E-NXT yang kami upload ada 2 versi, v1.6 dan v2.0
NOTE :  cek dibawah imei ; SN : S5ES31S=V1.6 & S5E5NOSSDG=V2.0
Bahan :

*) BYPASS FRP ONLY / BYPASS AKUN GOOGLE PAC FILE

Cara Kerja BYPASS FRP :

  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (+)

*) FIRMWARE FULL

1. Advan S5E-NXT V1.6 & Tool STICKER SN : S5ES31S

2. Advan S5E-NXT V2.0 & Tool STICKER SN :S5E5NOSSDG

3. Driver SPD by InfinityBox

4. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Note :
1. cek dibawah imei ; SN : S5ES31S=V1.6 & S5E5NOSSDG=V2.0
bila sticker hilang, untuk mengetahui apakah S5E-NXT anda v1.6 atau v2.0 silahkan lakukan flashing via Research download atau QGDP, bila gak jalan berarti versi satunya
2. S5E-NXT V1.6 flash via Research Download
3. S5E-NXT V2.0 flash via QGDP (PASS QGDP : 369)
4. BOOT vol-

Cara Bypass FRP Advan S5E-NXT via research Download

Cara Flash Advan S5E-NXT via QGDP tool

Log Info Firmware Advan S5E-NXT
Operation : Check/Read Info [ v1.26 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable

 ====  Wait for phone…

Phone found! [ 11 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : revo_xx08
Model Brand : ADVAN
Model Device: S5E_NXT
AndrVersion : 5.1
BaseBand CPU: SP7731CEA
CompileDate : 10/24/2016 2:16:39 AM
Project Ver : TCS5056A_ADVAN_S5E_NXT_V1.6_20161024
Model Ext   : S5E_NXT

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:20

Flash, Firmware & BYPASS FRP Mito A69

Model Name  : s7358_qhd_lmplus_dt_Multi
Model Brand : MITO_A69
Model Device: scx35_s7358_qhd_lm
AndrVersion : 5.1
BaseBand CPU: S7358_QHD_LM
Project Ver : MITO_A69_07-09-2016_V10
Model Ext   : MITO_A69

Bahan:

DOWNLOAD BYPASS FRP ONLY / BYPASS AKUN GOOGLE ~ MITO A69

1. Download Firmware PAC FULL Mito A69 v10 atau Download disini

2. Download Firmware PAC FULL Mito A69 v14 atau Download disini

3. Download Research Download R2.10
4. Driver SPD by InfinityBox
5. Turorial Flash via research here
6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k
Error pada research download baca disini

Cara Kerja :

  • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
  • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
  • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
  • Boot volume (- /+)
  • Flash  Mito A69 via research Download, flash aja dgn rom diatas + BYPASS FRP
  • Buat mito A69 V08 : MITO_A69_16112016_V08 silah kan pake A69 versi 014 => klo berhenti dis ystem, flash pake v14 tanpa system, selesai baru flash pake system, DONE

Model Name  : sp7731g_s7358_qhd_lm_oversea
Model Brand : HOTWAV
Model Device: scx35_s7358_qhd_lm
AndrVersion : 6.0
BaseBand CPU: S7358_QHD_LM
CompileDate : 11/19/2016 8:40:13 AM
Project Ver :
Model Ext   : MITO_A69

    Cara Flash  Mito A69 via Research Download

    Log Read Firmware Mito A69
    Operation : Read FullFlash [ v1.26 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
    3. Insert cable

     ====  Wait for phone…

    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    – > Wait phone connected …
    Phone found! [ 34 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SPRD 773x eMMC loader v3 Infinity
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    Model Name  : s7358_qhd_lmplus_dt_Multi
    Model Brand : MITO_A69
    Model Device: scx35_s7358_qhd_lm
    AndrVersion : 5.1
    BaseBand CPU: S7358_QHD_LM
    Project Ver : MITO_A69_07-09-2016_V10
    Model Ext   : MITO_A69
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_540x960.bin
    Skip [EMP] : FBOOTLOGO
    Skip [EMP] : FBOOTLOGO3
    Skip [EMP] : FBOOTLOGO4
    Skip [EMP] : FBOOTLOGO5
    Skip [EMP] : FBOOTLOGO6
    Skip [EMP] : FBOOTLOGO7
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img
    AndroidInfo created
    Firmware Size : 1331 MiB
    Saved to : E:\andro 1\mito\mito a69\New folder\S7358_QHD_LM_scx35_s7358_qhd_lm_5.1_MITO_A69_07-09-2016_V10_MITO_A69\
    Done!