Download Firmware MAXTRON S8

Bahan :

1. Download  Firmware MAXTRON_S8

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Note :

23456-syarat2bdan2bketentuan

Firmware Maxtron S9 ~ MTK MT6737M

project: t861be_v1_8c_lt_s50k_max

version: MAXTRON_S9_V04_20180315

buildtime: 20180315001111

camera:imx135_mipi_rawgc2355_mipi_rawimx219_mipi_raw

TP: gslx680GT1x_hotknot

flash: NCLD3B1256M32

modem: t861bev1_n2_lwg_cotsx

Bahan :

1. Download  Firmware MAXTRON_S9

3. Download SP-Flash-Tool Wajib pake versi ini Download Disini

4. Driver bila belum punya instal dulu driver mtknya

5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI

6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Note :

project: t861be_v1_8c_lt_s50k_max

version: MAXTRON_S9_V04_20180315

buildtime: 20180315001111

camera:imx135_mipi_rawgc2355_mipi_rawimx219_mipi_raw

TP: gslx680GT1x_hotknot

flash: NCLD3B1256M32

modem: t861bev1_n2_lwg_cotsx

name: MTK_PLATFORM_CFG

version: V1.1.2

platform: MT6737M

project: t861be_v1_8c_lt_s50k_max

storage: EMMC

bootChannel: MSDC_0

blockSize: 0x00020000

MTK Preloader file info.

23456-syarat2bdan2bketentuan

Firmware Maxtron V15 SPD

Model Name  : V15

Model Brand : MAXTRON

Model Device: V15

AndrVersion : 7.0

BaseBand CPU: MAXTRON

Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932

Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (-)

Cara Flash Mxtron V15 via Research Download

Log Read Firmware Maxtron V15

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

syarat-dan-ketentuan

Flash & Firmware Maxtron V15 SPD

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

Tool & Bahan :

  1. Download Firmware PAC Maxtron V15  SC7731C_FS286_XDH_M123B_V15_V06 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash Maxtron V15 via Research Download

Log Read Firmware Maxtron V15 
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 12 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC773x eMMC Loader v7 InfinityBox
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : V15
Model Brand : MAXTRON
Model Device: V15
AndrVersion : 7.0
BaseBand CPU: MAXTRON
Project Ver : 7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932
Model Ext   : V15

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : fbootlogo3.bin
[Read Ok] : fbootlogo4.bin
[Read Ok] : fbootlogo5.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2537 MiB
Saved to : D:\maxtron\maxtron v15\New folder\MAXTRON_V15_7.0_7731C_FS286_XDH_M123B_V15_V06_64X8_PLS_2SIM_20171206_0932_V15\
Done!

Elapsed: 00:17:43

Firmware Maxtron Amor Flash tool

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Firmware Maxtron Amor
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Amor via Flash tool

Log Read Firmware Maxtron Amor
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048603A2668090F1
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A2668090F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 115404C62466D68A621B88FE17633564
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 690 MiB
Scatter saved to : G:\andro3\maxtron\amor\MT6572__Maxtron__AMOR__himax_s451_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!

Firmware Flash Maxtron Apollo Flash Tool

  Maxtron Apollo

Brand     : YUSUN
ProdName  : Maxtron-Apollo
ProdModel : Maxtron-Apollo
Device    : Maxtron-Apollo
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.6

Bahan :

  1. Download Firmware Maxtron Apollo 
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Apollo via Flash Tool

Log Read Firmware Maxtron Apollo
Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 1501004E35575A4D42017DE4CC91B033
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D42017DE4CC91B033
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E9000000
[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
DEV RID    : 0xA9315567FAED00849F93171ED3576207
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : YUSUN
ProdName  : Maxtron-Apollo
ProdModel : Maxtron-Apollo
Device    : Maxtron-Apollo
AndroidVer: 4.2.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.JB5.MP.V1.6

[Read Ok] : preloader_huaqin82_wet_b2d_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / huaqin82_wet_b2d_jb5 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 548 MiB
Scatter saved to : F:\andro3\maxtron\apollo\MT6582__YUSUN__Maxtron-Apollo__Maxtron-Apollo__4.2.2__ALPS.JB5.MP.V1.6\

All done!

Flash Maxtron Amor Flash tool

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

Bahan :

  1.  Download Maxtron Amor
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Maxtron Amor via Flash tool

Log Read Firmware Maxtron Amor
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A4834473164048603A2668090F1
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , d1G4
[eMMC] : FLASH_CID : 90014A4834473164048603A2668090F1
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000E7000000
[eMMC] : FLASH_UCP : 3696 MiB [eMMC 4 GiB]
DEV RID    : 115404C62466D68A621B88FE17633564
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

Brand     : Maxtron
ProdName  : himax_s451_jb3
ProdModel : AMOR
Device    : himax_s451_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_hongyu72_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hongyu72_wet_jb3 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 690 MiB
Scatter saved to : G:\andro3\maxtron\amor\MT6572__Maxtron__AMOR__himax_s451_jb3__4.2.2__ALPS.JB3.MP.V1\

All done!