Flash & Fix Blank Polytron R2403 VIOLET

Device Brand   : Spreadtrum
Device Model   : P1923
Device CPU     : P1923
Device IntName : P1923_PT
Device Version : 4.4.2
Device Compile : 9/18/2015 10:50:52 AM
Device Project : POLYTRON_R2403_1300_V1.1.3_20150918
Device ExtInfo : POLYTRON_R2403

Bahan :

  1.  Download Firmware PAC POLYTRON_R2403_1300_V1.1.3 atau  Download Disini
  2.  Download Firmware PAC POLYTRON_R2403_1300_V1.0.8 atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Note :
1. Boot volume +/-

 Cara Flash Polytron R2403 via Research Download

Log Read Firmware Polytron R2403
Operation : Read FullFlash [ v1.19 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!
[FW_READER] : Step #2 Passed!
[FW_READER] : Step #3 Passed!

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC7730/7731 eMMC Loader v1.1 Inf
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : P1923_PT
Model Brand : Spreadtrum
Model Device: P1923
AndrVersion : 4.4.2
BaseBand CPU: P1923
Project Ver : POLYTRON_R2403_1300_V1.1.3_20150918
Model Ext   : POLYTRON_R2403

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 838 MiB
Saved to : G:\andro3\POLYTRON\r2403\P1923_P1923_4.4.2_POLYTRON_R2403_1300_V1.1.3_20150918_POLYTRON_R2403\
Done!

Flash & Firmware Axioo AX4 M5S

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

Bahan :

  1.  Download Firmware PAC REPAC Resign Axioo AX4 M5S ORI atau  Download Disini
  2.  Download Firmware PAC  Axioo AX4 M5S CUSTOM atau  Download Disini
  3.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  4.  Driver SPD by InfinityBox
  5.  Tutorial Flash via research here
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Error pada research download baca disini

Note :
1. Boot volume +/-
2. BYPASS FRP Axioo AX4 M5S via research Download, Pastikan Polytron Axioo AX4 M5S normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang

Cara Flash Axioo AX4 M5S via Research Download

Log Read Firmware Axioo AX4 M5S
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 13 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX4
Model Brand : Axioo
Model Device: Axioo_AX4
AndrVersion : 7.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_M5S_GDB0_SW20170920
Model Ext   : Axioo_AX4

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sc983x_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : udc_config.bin
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2648 MiB
Saved to : E:\andro 1\axioo\AX4 M5S\SP9832A_2H11_VOLTE_Axioo_AX4_7.0_Axioo_M5S_GDB0_SW20170920_Axioo_AX4\
Done!

BYPASS FRP & FLASH HM M3

FRP HM M3 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian dan kegiatan ilegal lainnya, thx

Model Name  : sp7731c_1h10_oversea
Model Brand : HM
Model Device: sp7731c_1h10
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : MRA58K release-keys
Model Ext   : M3

 Simple dan cepet selesai, file cuman kurang dari 1MB, Flash gak nyampe 10dtk dah selesai. IRIT QUOTA

Bahan :

A. BYPASS FRP ONLY ukuran PAC 1 MB

B. ROM PAC FULL HM M3

     TOOL :

    1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    2.  Driver SPD by InfinityBox
    3.  Tutorial Flash via research here
    4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Cara Kerja :

    • Untuk FRP HM M3 tinggal pake PAC BYPASS FRP ONLY
    • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
    • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
    • Boot volume (+)

    Cara Bypass FRP HM M3 via Research Download

    Cara Flash HM M3 via Research Download

    Log Read Firmware HM M3
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731c_1h10_oversea
    Model Brand : HM
    Model Device: sp7731c_1h10
    AndrVersion : 6.0
    BaseBand CPU: SP7731CEA
    Project Ver : MRA58K release-keys
    Model Ext   : M3
    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731C_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_720x1280.bin
    [Read Ok] : logo2.bin
    [Read Ok] : logo3.bin
    [Read Ok] : logo4.bin
    [Read Ok] : logo5.bin
    [Read Ok] : logo6.bin
    [Read Ok] : logo7.bin
    [Read Ok] : logo8.bin
    [Read Ok] : logo9.bin
    [Read Ok] : logo10.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : sysinfo.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1707 MiB
    Saved to : E:\hm\m3\New folder\SP7731CEA_sp7731c_1h10_6.0_MRA58K_release-keys_M3\
    Done!

    Flash & Firmware Nexcom Mega

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    Bahan :

    1.  Download Firmware PAC Nexom Mega atau  Download Disini
    2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    3.  Driver SPD by InfinityBox
    4.  Tutorial Flash via research here
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Note :
    1. Boot volume (-)

    Cara Flash Nexcom Mega via Research Download

    Log Read Firmware Nexcom Mega
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    FDL Ready!
    Boot Ver : SC8830 Loader eMMC v1.1 Inf     
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : s7190a
    Model Brand : NEXCOM
    Model Device: scx35_sp5735c2ea
    AndrVersion : 4.4.2
    BaseBand CPU: SP5735C2EA
    Project Ver : NC_Mega_20160920
    Model Ext   : Mega

    [Read Mode] : HSUSB : 0x3000
    [FW_READER] : Reading Firmware Now …
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc8830_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    [Read Ok] : nvitem_w.bin
    [Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
    [Read Ok] : nvitem_wcn.bin
    [Read Ok] : logo_800x1280.bin
    [Read Ok] : fblogo_800x1280.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 1044 MiB
    Saved to : F:\Nexcom Mega\SP5735C2EA_scx35_sp5735c2ea_4.4.2_NC_Mega_20160920_Mega\
    Done!

    Flash Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2407_V5.2.10_20161223
    Model Ext   : POLYTRON R2407

    Bahan :

    1.  Download Firmware PAC Polytron R2407 WHITE GOLD ZT / DARK GOLD ZT atau  Download Disini
    2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    3.  Driver SPD by InfinityBox
    4.  Tutorial Flash via research here
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    Firmware Polytron R2407 versi lainnya :

     Error pada research download baca disini

    Note :
    1. Boot volume +/-
    2. BYPASS FRP Polytron R2407 via research Download, Pastikan Polytron R2407 normal, emmc, Flash terlebih dahulu, bila hp hidup normal dan terkunci FRP (HP EMMC OK), bisa lanjut ke-step berikutnya, masuk ke TAB SETTING (icon GEAR), pilih Tab FLASH OPERATION, Centang ERASE ALL FLASH, Flash=> FRP hilang

    Cara Flash Polytron R2407 via Research Download

    Log Read Firmware Polytron R2407 white gold zt
    Operation : Read FullFlash [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable
     ====  Wait for phone…
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!
    FlashMode Set : Ok!
    Detected eMMC Flash , Structure detect Ok!
    [FW_READER] : Prepare Ok!
    – > Wait phone connected …
    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    – > Wait phone connected …

    Phone found! [ 7 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    Model Name  : sp7731geahdrplusoversea
    Model Brand : POLYTRON
    Model Device: device
    AndrVersion : 5.1
    BaseBand CPU: SP7731GEA_HDR
    Project Ver : POLYTRON_R2407_V5.2.10_20161223
    Model Ext   : POLYTRON R2407

    [Read Mode] : HSUSB : 0x3000

    [FW_READER] : Reading Firmware Now …

    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : u-boot-spl-16k.bin
    [Read Ok] : u-boot.bin
    [Read Ok] : prodnv.img
    [Read Ok] : sc7731g_CP0_modem.bin
    [Read Ok] : DSP_DM_Gx.bin
    Skip [NID] : WFIXNV1
    [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
    Skip [NID] : WCNFIXNV1
    [Read Ok] : logo_480x800.bin
    [Read Ok] : fblogo_480x800.bin
    [Read Ok] : boot.img
    [Read Ok] : system.img
    [Build Ok] : cache.img
    [Read Ok] : recovery.img
    [Read Ok] : fbootlogo3.bin
    [Read Ok] : fbootlogo4.img
    [Read Ok] : fbootlogo5.bin
    [Build Ok] : userdata.img

    AndroidInfo created
    Firmware Size : 2235 MiB
    Saved to : E:\andro 1\polytron\r2407\r2407 white gold zt\New folder\SP7731GEA_HDR_device_5.1_POLYTRON_R2407_V5.2.10_20161223_POLYTRON_R2407\
    Done!  

    Cara Flash & Firmware Mito A230 V2 T06 & T02

    Model Name  : A230
    Model Brand : MITO
    Model Device: A230
    AndrVersion : 5.1
    BaseBand CPU: C7368_FWVGA
    CompileDate : 5/8/2017 4:00:58 AM
    Project Ver : MITO_A230_20170508_324_T06
    Model Ext   : MITO A230

    Bahan :

    1.  Download Firmware PAC Mito A230 T06 / T02 atau  Download Disini
    2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
    3.  Driver SPD by InfinityBox
    4.  Tutorial Flash via research here
    5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

     Error pada research download baca disini

    Cara Flash Mito A230 via Research Download

    Log Info Mito A230 V2
    Operation : Check/Read Info [ v1.27 ]

    1. Remove battery. Insert battery back
    2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
     -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
    3. Insert cable

     ====  Wait for phone…

    Phone found! [ 6 ]
    Port Opened
    Sync…
    InitBoot Done [ 0x81 ] , Ver : SPRD3
    Sync…
    Sending FDL
    [Info] : If SW freeze here more, than 15 seconds – remove cable
    PickUp loaders from pac
    FDL Ready!
    Boot Ver : Spreadtrum Boot Block version 1.1
    Sending FLASH FDL
    FLASH FDL Ready!
    Boot Ok!

    FLASH : eMMC Flash , Structure : Ok!

    Reading extended info …

    Model Name  : A230
    Model Brand : MITO
    Model Device: A230
    AndrVersion : 5.1
    BaseBand CPU: C7368_FWVGA
    CompileDate : 5/8/2017 4:00:58 AM
    Project Ver : MITO_A230_20170508_324_T06
    Model Ext   : MITO A230

    Loading    : MITO_A230_20161103_324_T02_V2.pac
    CRVersion  : BP_R1.0.0
    PacCPUinfo : SC77xx
    PacVersion : T02
    FastCheck  : 0x006ED7CE20

    Loading files …

    File : Infinity_fdl1.bin
    File : Infinity_fdl2.bin
    File : nvitem_w.bin
    File : nvitem_wcn.bin
    File : prodnv.img
    File : u-boot-spl-16k.bin
    File : sc7731C_CP0_modem.bin
    File : DSP_DM_Gx.bin
    File : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
    File : logo_480x854.bin
    File : fblogo_480x854.bin
    File : boot.img
    File : system.img
    File : oem.img
    File : sysinfo.img
    File : cache.img
    File : recovery.img
    File : userdata.img
    File : u-boot.bin
    File : SC77xx.xml

    Load Ok!

    Flash Mito A880 Black / White SC7731C & Bypass FRP akun Google

    FRP Mito A880  Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)

    Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

    Model Name  : MITO A880
    Model Brand : MITO
    Model Device: MITO-A880
    AndrVersion : 6.0
    BaseBand CPU: SP7731CEA
    Project Ver : MITO_A880_12092017_V04
    Model Ext   : MITO A880

    Bahan :

    A. BYPASS FRP ONLY / BYPASS AKUN GOOGLE

      B. Download Firmware PAC FULL

      C. BYPASS FRP via SDCARD Download APK buat BYPASS FRP Mito A880 atau Download Disini 

      D. Tool

      1.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
      2.  Driver SPD by InfinityBox
      3.  Tutorial Flash via research here
      4.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

       Error pada research download baca disini

      Cara Kerja :

      • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
      • Bypass FRP via APK /SDCARD tutor dibawah
      • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
      • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
      • Boot volume (-)
      • Flash  Mito A880 via research Download, flash aja dgn rom diatas + BYPASS FRP
        BYPASS FRP  Mito A880, hanya centang pada FDL1, FDL 2, dan persist

      Cara Flash Mito A880 via Research Download

      Cara Bypass FRP Mito A880 Via MMC / SDCARD
      1. Sudah konek WIFI atau pake paket data, apk dah dicopy ke mmc, pasang ke mito A880
      2. Ketikan huruf di wifi pada sandi, blok kata tsb
      3. pilih bantuan
      4. masuk google ketikan file manager
      5. Install Google Akun Manager V6
      6. Install  quickshortcutmaker dan jalankan
      6. pilih/cari Pengelola Akun Google => Pilih Ketikan Email & sandi=>COBA
      7. sentuh titik 3 di pojok kanan atas => masuk browser
      8. masukkan email gmail dan sandi
      9. Restart
      10. tinggal next-2 sampai masuk menu, aktifkan ADB, RESET FACTORY
      11. Done
      Note : harap dikasih sim waktu reset Mito A880
      Video BYPASS FRP Mito A880

      Log Read Firmware Mito A880

      Operation : Read FullFlash [ v1.27 ]
      1. Remove battery. Insert battery back
      2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
       -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
      3. Insert cable
       ====  Wait for phone…
      Phone found! [ 19 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      FlashMode Set : Ok!
      Detected eMMC Flash , Structure detect Ok!
      [FW_READER] : Prepare Ok!
      – > Wait phone connected …
      Phone found! [ 19 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!

      – > Wait phone connected …

      Phone found! [ 19 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!

      Model Name  : MITO A880
      Model Brand : MITO
      Model Device: MITO-A880
      AndrVersion : 6.0
      BaseBand CPU: SP7731CEA
      Project Ver : MITO_A880_12092017_V04
      Model Ext   : MITO A880

      [Read Mode] : HSUSB : 0x3000

      [FW_READER] : Reading Firmware Now …

      [Read Ok] : u-boot-spl-16k.bin
      [Read Ok] : u-boot.bin
      [Read Ok] : prodnv.img
      [Read Ok] : sc7731C_CP0_modem.bin
      [Read Ok] : DSP_DM_Gx.bin
      [Read Ok] : nvitem_w.bin
      [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
      [Read Ok] : nvitem_wcn.bin
      [Read Ok] : logo_480x854.bin
      [Read Ok] : fblogo_480x854.bin
      [Read Ok] : boot.img
      [Read Ok] : system.img
      [Read Ok] : sysinfo.img
      [Build Ok] : cache.img
      [Read Ok] : recovery.img
      [Build Ok] : userdata.img
      AndroidInfo created
      Firmware Size : 1940 MiB
      Saved to : E:\mito\mito a880\SP7731CEA_MITO-A880_6.0_MITO_A880_12092017_V04_MITO_A880\
      Done!

      Flash & Firmware Brancode B77

      Model Name  : sp7731c_1h10_32v4_oversea
      Model Brand : wanda
      Model Device: sp7731c_1h10_32v4
      AndrVersion : 6.0
      BaseBand CPU: SP7731CEB
      Project Ver : B77_16B_2SIM_20161122
      Model Ext   : B77

      PENTING !!! Kami hanya Upload 1 file mohon dicek versi dkk, backup dulu kalau perlu
      Bahan :

      1.  Download Firmware PAC Brancode  B77 16B_2SIM_20161122 atau  Download Disini
      2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
      3.  Driver SPD by InfinityBox
      4.  Tutorial Flash via research here
      5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      Error pada research download baca disini

      Note :
      1. Boot Volume +

      Cara Flash Brandcode B77 via Research Download

      Log Read Firmware Brandcode B77

      Operation : Read FullFlash [ v1.27 ]
      1. Remove battery. Insert battery back
      2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
       -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
      3. Insert cable
       ====  Wait for phone…
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      FlashMode Set : Ok!
      Detected eMMC Flash , Structure detect Ok!
      [FW_READER] : Prepare Ok!
      – > Wait phone connected …
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      – > Wait phone connected …

      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      FDL Ready!
      Boot Ver : SC7731 Crev eMMC Loader v2.0    
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!

      Model Name  : sp7731c_1h10_32v4_oversea
      Model Brand : wanda
      Model Device: sp7731c_1h10_32v4
      AndrVersion : 6.0
      BaseBand CPU: SP7731CEB
      Project Ver : B77_16B_2SIM_20161122
      Model Ext   : B77

      [Read Mode] : HSUSB : 0x3000

      [FW_READER] : Reading Firmware Now …

      [Read Ok] : u-boot-spl-16k.bin
      [Read Ok] : u-boot.bin
      [Read Ok] : prodnv.img
      [Read Ok] : sc7731C_CP0_modem.bin
      [Read Ok] : DSP_DM_Gx.bin
      [Read Ok] : nvitem_w.bin
      [Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.43.3_Release.bin
      [Read Ok] : nvitem_wcn.bin
      [Read Ok] : logo_480x854.bin
      [Read Ok] : fblogo_480x854.bin
      [Read Ok] : boot.img
      [Read Ok] : system.img
      [Read Ok] : sysinfo.img
      [Build Ok] : cache.img
      [Read Ok] : recovery.img
      [Read Ok] : udc_config.bin
      [Build Ok] : userdata.img

      AndroidInfo created
      Firmware Size : 1681 MiB
      Saved to : E:\andro 1\brandcode\b77\SP7731CEB_sp7731c_1h10_32v4_6.0_B77_16B_2SIM_20161122_B77\
      Done!

       

      Repair Lenovo A1000 LCD Blank / White Screen / Garis-garis

      Model Name  : A1000
      Model Brand : Lenovo
      Model Device: A1000
      AndrVersion : 5.0
      BaseBand CPU: A1000
      Project Ver : A1000_USR_S30666_1611211455_SPRD7731_ROW
      Model Ext   : Lenovo A1000
       
      Salah versi dalam flash Lenovo A1000 bisa menyebabkan layar LCD jadi Blank atau LCD bergaris-garis seperti gambar dibawah :

      Bahan :

      1.  Download Firmware PAC FIX_BLANK_A1000_SPRD7731_ROW_Lenovo_A1000 atau   Download Disini
      2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
      3.  Driver SPD by InfinityBox
      4.  Tutorial Flash via research here
      5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      Firmware Lenovo A1000 versi lainnya :

      1. Buat Fix Lenovo A1000 abis flash done, hp dah ok, tapi abis di direstart stuck logo lagi, silahkan download disini/FIX STUCK LOGO LAGI

      2. A1000_A1000_5.0_A1000_USR_S27762_1509171712_SPRD7731_ROW_Lenovo_A1000
      3. A1000_A1000_5.0_A1000_USR_S575_20170210_SPRD7731_ROW_Lenovo_A1000
      4. A1000_A1000_5.0_A1000_USR_S30666_1611211455_SPRD7731_ROW_Lenovo_A1000

      Error pada research download baca disini

      Note :
      1. Boot Volume +
      2. Buat yg abis di FIX WHITE SCREEN/BLANK, hape dah ok,  tapi abis di direstart stuck logo lagi, silahkan flash pake FIX STUCK LOGO LAGI, tapi jangan dicentang erase uboot, boot, boot logo & uboot, seperti gambar dibawah

      Cara Flash Lenovo A1000 via Research Download

      Log Read Firmware Lenovo A1000
      Operation : Read FullFlash [ v1.25 ]

      1. Remove battery. Insert battery back
      2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
      3. Insert cable

       ====  Wait for phone…

      Phone found! [ 11 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      PickUp loaders from pac
      FDL Ready!
      Boot Ver : Spreadtrum Boot Block version 1.1
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!

      FlashMode Set : Ok!
      Detected eMMC Flash , Structure detect Ok!

      [FW_READER] : Prepare Ok!
      – > Wait phone connected …

      Phone found! [ 11 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      PickUp loaders from pac
      FDL Ready!
      Boot Ver : Spreadtrum Boot Block version 1.1
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!

      – > Wait phone connected …

      Phone found! [ 11 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      PickUp loaders from pac
      FDL Ready!
      Boot Ver : Spreadtrum Boot Block version 1.1
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!

      Model Name  : A1000
      Model Brand : Lenovo
      Model Device: A1000
      AndrVersion : 5.0
      BaseBand CPU: A1000
      Project Ver : A1000_USR_S30666_1611211455_SPRD7731_ROW
      Model Ext   : Lenovo A1000

      [Read Mode] : HSUSB : 0x3000

      [FW_READER] : Reading Firmware Now …

      [Read Ok] : u-boot-spl-16k.bin
      [Read Ok] : u-boot.bin
      [Read Ok] : prodnv.img
      [Read Ok] : sc7731g_CP0_modem.bin
      [Read Ok] : DSP_DM_Gx.bin
      [Read Ok] : nvitem_w.bin
      [Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
      [Read Ok] : nvitem_wcn.bin
      [Read Ok] : logo_480x800.bin
      [Read Ok] : fblogo_480x800.bin
      [Read Ok] : boot.img
      [Read Ok] : system.img
      [Read Ok] : oem.img
      [Build Ok] : cache.img
      [Read Ok] : recovery.img
      [Build Ok] : userdata.img

      AndroidInfo created
      Firmware Size : 2518 MiB
      Saved to : E:\andro3\lenovo\lenovo a1000 7731\Lenovo A1000\A1000_A1000_5.0_A1000_USR_S30666_1611211455_SPRD7731_ROW_Lenovo_A1000\
      Done!

      Flash & Fix LCD Blank Lenovo A1000m ~ BYPASS FRP

       

      Model Name  : A1000m
      Model Brand : Lenovo
      Model Device: scx35_sp7731gea_taichi
      AndrVersion : 5.1
      BaseBand CPU: SP7731GEA_TAICHI
      CompileDate : 6/2/2016 8:16:35 AM
      Project Ver : A1000m_S353_20160602_ROW
      Model Ext   : Lenovo A1000m

      Tested buat Lenovo A1000m
      -A1000m_S353_20160602_ROW
      -A1000m_S399_20160701_ROW
       
      Bahan :

      1. Download Firmware PAC Lenovo A1000m atau Download Disini
      2. Download Firmware PAC Lenovo A1000m Fix LCD Blank atau Download Disini
      2. Download Research Download R2.10
      3. Driver SPD by InfinityBox
      4. Tutorial Flash via research here
      5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

      BYPASS FRP ONLY / LOCK AKUN GOOGLE Lenovo A1000M ( File ukuran man 1MB)

      Cara Kerja :

      • Untuk FRP tinggal pake PAC BYPASS FRP ONLY
      • Bila tidak jalan berheti di FDL1 branti versi tidak sama, silahkan gunakan versi lain
      • Bila terjadi Blank / MATOT berarti salah versi, silahkan ganti file FRP, atau Full Flash pake firmware PAC FULL
      • Boot volume (+)
        BYPASS FRP  Lenovo A1000M, hanya centang pada FDL1, FDL 2, dan persist

      Error pada research download baca disini

      Flash Lenovo A1000m via Research Download

      Log Read info Lenovo A1000m
      Operation : Check/Read Info [ v1.22 ]

      1. Remove battery. Insert battery back
      2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
      3. Insert cable
       ====  Wait for phone…
      Phone found! [ 34 ]
      Port Opened
      Sync…
      InitBoot Done [ 0x81 ] , Ver : SPRD3
      Sync…
      Sending FDL
      [Info] : If SW freeze here more, than 15 seconds – remove cable
      PickUp loaders from pac
      FDL Ready!
      Boot Ver : Spreadtrum Boot Block version 1.1
      Sending FLASH FDL
      FLASH FDL Ready!
      Boot Ok!
      FLASH : eMMC Flash , Structure : Ok!
      Reading extended info …
      Model Name  : A1000m
      Model Brand : Lenovo
      Model Device: scx35_sp7731gea_taichi
      AndrVersion : 5.1
      BaseBand CPU: SP7731GEA_TAICHI
      CompileDate : 6/2/2016 8:16:35 AM
      Project Ver : A1000m_S353_20160602_ROW
      Model Ext   : Lenovo A1000m
      ExtraInfo : HWInfo not exists, normal phone
      Loading    : A1000m_USR_S399_20160701_SPRD7731_ROW.pac
      CRVersion  : BP_R1.0.0
      PacCPUinfo : SC77xx
      PacVersion : A1000m_USR_S399_20160701_SPRD7731_ROW
      FastCheck  : 0x0057AF0A40
      Loading files …
      File : fdl1-sign.bin
      File : fdl2-sign.bin
      File : wnvitem.bin
      File : wcnnvitem.bin
      File : prodnv.img
      File : u-boot-spl-16k-sign.bin
      File : wmodem-sign.bin
      File : wdsp-sign.bin
      File : wcnmodem-sign.bin
      File : boot-sign.img
      File : recovery-sign.img
      File : system.img
      File : oem.img
      File : persist.img
      File : sysinfo.img
      File : userdata.img
      File : boot_logo.bmp
      File : fastboot_logo.bmp
      File : cache.img
      File : u-boot-sign.bin
      File : SC77xx.xml

      Load Ok!