Flash & Firmware Nexcom Mega

Model Name  : s7190a
Model Brand : NEXCOM
Model Device: scx35_sp5735c2ea
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
Project Ver : NC_Mega_20160920
Model Ext   : Mega

Bahan :

  1.  Download Firmware PAC Nexom Mega atau  Download Disini
  2.  Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3.  Driver SPD by InfinityBox
  4.  Tutorial Flash via research here
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Note :
1. Boot volume (-)

Cara Flash Nexcom Mega via Research Download

Log Read Firmware Nexcom Mega
Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable
 ====  Wait for phone…
Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!
[FW_READER] : Prepare Ok!
– > Wait phone connected …
Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 7 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SC8830 Loader eMMC v1.1 Inf     
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : s7190a
Model Brand : NEXCOM
Model Device: scx35_sp5735c2ea
AndrVersion : 4.4.2
BaseBand CPU: SP5735C2EA
Project Ver : NC_Mega_20160920
Model Ext   : Mega

[Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now …
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc8830_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_800x1280.bin
[Read Ok] : fblogo_800x1280.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1044 MiB
Saved to : F:\Nexcom Mega\SP5735C2EA_scx35_sp5735c2ea_4.4.2_NC_Mega_20160920_Mega\
Done!

Flash & BYPASS FRP Nexcom A1000 Verifikasi Akun Google

FRP Nexcom A1000 Verifikasi akun Google ini mencegah pengguna yang tidak sah dari Mengakses atau menggunakan perangkat Anda jika telah ulang ke pengaturan pabrik tanpa izin Anda (misalnya, jika perangkat hilang atau dicuri)
Mohon digunakan dengan bijaksana, jangan digunakan pada hp curian. thx

Nexcom A1000
Brand     : A1000
ProdName  : A1000
ProdModel : A1000
Device    : A1000
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

Bahan :

  1.  Download  Firmware Nexcom A1000 FRP ONLY atau Download Disini (1MB)
  2.  Download Firmware Nexcom A1000 + FRP atau Download Disini
  3.  Download SP_Flash_Tool_v5.1516 Download Disini
  4.  Driver bila belum punya instal dulu driver mtknya
  5.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 
 Cara Kerja :
1. Buat remove FRP verifikasi akun google Nexcom A1000 tinggal pake file FRP only (file ke 1), hanya centang pada tab FRP saja seperti video dibawah
2.  Kalau mau full flash Nexcom A1000 pake file yang ke 2

Cara Flash & remove FRP verifikasi akun google Nexcom A1000 via flash tool

Log Read Firmware Nexcom A1000
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 45010053454D3034472882A08637B071
Initialize Memory …
DRAM already initialized by Preloader
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D3034472882A08637B071
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 63936DF2C27812FF933ACC9276FF68CC
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now …
xGPT : Normalize settings Ok!

Brand     : A1000
ProdName  : A1000
ProdModel : A1000
Device    : A1000
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29

[Read Ok] : preloader_b36a_j3_1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / b36a_j3_1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1652 MiB
Scatter saved to : E:\andro 1\nexcom\a1000\MT6580__A1000__A1000__A1000__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29\
All done!

Flash Nexcom Apple

Nexcom Apple
Brand     : Android
ProdName  : bird72_wet_a_jb3
ProdModel : Android
Device    : bird72_wet_a_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : 1370F.S11M.NEXCOM.A1.GMS4222.140410.JB3.V1.WVGA.EN.TST.4P2

Bahan :

  1.  Download Firmware Nexcom Apple Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Flash Nexcom Apple Via Flashtool

Log Read Firmware Nexcom Apple
Operation : Read Flash [ v1.46 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6572
BB_CPU_NME : [MediaTek] MT6572_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x88
NAND Flash : 009800BC009000660076001500010000
eMMC Flash : NOT INSTALLED
Initialize Memory …
DRAM already initialized by Preloader
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0096 , [TOSHIBA] TYBC0A111557KC
[NAND] : FLASH_DIE : 0098 00BC 0090 0066 0076 0015 0001
[NAND] : FLASH_LEN : 0x20000000
[NAND] : FLASH_EXT : 1000/0040/01/NIM_Px-1
DEV RID    : 86FB8C905A62D21FE46FF31441EB9AF3
INT RAM    : 0x00020000
EXT RAM    : 0x10000000
BOOT TYPE  : NAND_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

[Read Ok] : preloader_bird72_wet_a_jb3.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : usrdata.img

[ScatCFG] : MT6572 / V1.1.1 / bird72_wet_a_jb3 / NAND
FW Size : 291 MiB

Brand     : Android
ProdName  : bird72_wet_a_jb3
ProdModel : Android
Device    : bird72_wet_a_jb3
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : 1370F.S11M.NEXCOM.A1.GMS4222.140410.JB3.V1.WVGA.EN.TST.4P2

Android Info saved

Scatter saved to : E:\InfinityBox\CM2MTK\Flash\MT6572_NAND_Android__Android__bird72_wet_a_jb3__4.2.2__1370F.S11M.NEXCOM.A1.GMS4222.140410.JB3.V1.WVGA.EN.TST.4P2

Done!
Elapsed: 00:03:04