Cara Flash AXIOO AX7 S5T via Research Download

Model Name  : Axioo_AX7

Model Brand : Axioo

Model Device: Axioo_AX7

AndrVersion : 6.0

BaseBand CPU: SP9832A_2H11_VOLTE

Project Ver : Axioo_S5T_GSC0_SW20171108

Model Ext   : Axioo_AX7

Tool & Bahan :

  1. Download Firmware PAC Axioo AX7 S5T Tablet atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :

– Boot Volume (+-)

Cara Flash AXIOO AX7 S5T via Research Download

Log Read Firmware Axioo S5T

Operation : Read FullFlash [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
-> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

====  Wait for phone…

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 6 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
PickUp loaders from pac
FDL Ready!
Boot Ver : Spreadtrum Boot Block version 1.1
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : Axioo_AX7
Model Brand : Axioo
Model Device: Axioo_AX7
AndrVersion : 6.0
BaseBand CPU: SP9832A_2H11_VOLTE
Project Ver : Axioo_S5T_GSC0_SW20171108
Model Ext   : Axioo_AX7

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : nvitem_l.bin
[Read Ok] : sharkl_cp1.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : l__WPH_arm7.bin
[Read Ok] : PM_arm7_sys.bin
[Read Ok] : logo_600x1024.bin
[Read Ok] : fblogo_600x1024.bin
[Read Ok] : wcn_fdl.bin
[Read Ok] : AA_MARLIN.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 2102 MiB
Saved to : D:\axioo\axioo s5t\stock rom axioo s5t\SP9832A_2H11_VOLTE_Axioo_AX7_6.0_Axioo_S5T_GSC0_SW20171108_Axioo_AX7\
Done!

912ac-syarat2bdan2bketentuan

 

Firmware & Flash Axioo PICOpad 7H2 / PICOpad_S2L

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

Tool & Bahan :

  1. Download Firmware PAC AXIOO PICOPAD 7H2 atau Download Disini
  2. Download SPD_Upgrade_Tool_R4.0.0001 Download Disini
  3. Tutorial Flash via research here
  4. Driver SPD by InfinityBox
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

Cara Kerja :
– Boot Volume (-)

Cara Flash AXIOO PICOPAD 7H2 via Research Download

Log Read Info AXIOO PICOPAD 7H2
Operation : Check/Read Info [ v1.27 ]

1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
 -> Alternative : just ONE ‘VolumeUp’ or ‘VolumeDown’ key
3. Insert cable

 ====  Wait for phone…

Phone found! [ 5 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info …

Model Name  : PICOpad_7H2
Model Brand : Axioo
Model Device: PICOPad_7H2
AndrVersion : 5.1
BaseBand CPU: AXIOO
CompileDate : 5/6/2016 3:51:44 AM
Project Ver : PICOpad_S2L_CGS_SW_20160506
Model Ext   : PICOpad 7H2 7H(7 3G)

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:12 

Flash Axioo Picopad S1 atau 7H GGB

Brand     : Axioo
ProdName  : PICOpad S1
ProdModel : PICOpad S1(7 3G)
Device    : PICOpad S1
AndroidVer: 4.4.2
MTKxCPU   : MT6582
MTKxPRJ   : ALPS.KK1.MP1.V2.11
Axioo Picopad S1 atau Axioo Picopad 7H GGB
Picopad S1 GGB1 SW

Bahan :

  1.  Download firmware stock rom Axioo Picopad S1 atau Download Disini
  2.  Download Flash Tool DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI 
  5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

 Axioo 7H yang lain :

  1. BUAT AXIOO PICOpad 7H MT6572 KELINK INI
  2. BUAT AXIOO PICOpad 7H MT6582 KELINK INI

    Flash Axioo Picopad S1 via FlashTool

    About Axioo Picopad S1

    Log Read Firmware Axioo Picopad S1
    Start  at : [5/11/2016 / 11:05:12 PM]
    Operation : Read Flash [ v1.46 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital Boot Ok!
    BB_CPU_PID : 6582
    BB_CPU_NME : [MediaTek] MT6582_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer   : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1612.01.01
    Sending and initialize DA …
    Running DA ver.4.2 on BBID : 0x87
    NAND Flash : NOT INSTALLED
    eMMC Flash : 15010038574D423352011F825A5851F1
    Initialize Memory …
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x15 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
    [eMMC] : FLASH_CID : 15010038574D423352011F825A5851F1
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
    DEV RID    : 6E93FC7CA7700D01582D6E87AD9BF21B
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Content now …

    Brand     : Axioo
    ProdName  : PICOpad S1
    ProdModel : PICOpad S1(7 3G)
    Device    : PICOpad S1
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.11

    [Read Ok] : preloader_picopad_s1.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Make Ok] : cache.img
    [Make Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / picopad_s1 / EMMC
    Android Info saved
    HWConfig Info saved
    FW Size : 928 MiB
    Scatter saved to : G:\andro3\axioo\axio 7h s1 GGB1\MT6582__Axioo__PICOpad_S1(7_3G)__PICOpad_S1__4.4.2__ALPS.KK1.MP1.V2.11\

    All done!

    FLASH AXIOO PICOPHONE 4 GDF

    Brand     : Axioo
    ProdName  : PICOphone_4
    ProdModel : PICOphone_4
    Device    : PICOphone
    AndroidVer: 4.2.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.JB3.MP.V1

    FLASH AXIOO PICOPHONE 4 GDF

    Bahan :

    1.  Download firmwarenya Axioo PICOphone 4 GDF 4.2.2 ALPS.JB3.MP.V1.zip
    2.  Download Flash Toolnya DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
    5.  SCATTER ONLY
    6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    FLASH VIA FLASHTOOL

    LOG READ FLASH AXIOO PICOPHONE 4 GDF VIA CM2

    Start  at : [2/12/2016 / 11:16:47 PM]
    Operation : Read Flash [ v1.40 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 45010053454D30344728056E56D3B0E1
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0045 , OEM : 0100
    [eMMC] : FLASH_INF : [SANDISK] , G40ME
    [eMMC] : FLASH_CID : 45010053454D30344728056E56D3B0E1
    [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
    [eMMC] : FLASH_LEN : 0x00000000EC000000
    [eMMC] : FLASH_UCP : 3776 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : Axioo
    ProdName  : PICOphone_4
    ProdModel : PICOphone_4
    Device    : PICOphone
    AndroidVer: 4.2.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.JB3.MP.V1

    [Read Ok] : preloader_k298.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img

    [ScatCFG] : MT6572 / V1.1.1 / k298 / EMMC
    FW Size : 688 MiB
    Scatter saved to : G:\andro3\axioo\MT6572__Axioo__PICOphone_4__PICOphone__4.2.2__ALPS.JB3.MP.V1\

    All done!

    Done!
    Elapsed: 00:03:47
    Reconnect Power/Cable!

    Finish at : [2/12/2016 / 11:20:34 PM]

    FLASH AXIOO PICOpad 7H MT6582

    AXIOO PICOpad 7H MT6582

    FLASH AXIOO PICOpad 7H BOOTLOOP / DEAD BOOT


      Bahan :

    1. FIRMWARE MTK 6582 DOWNLOAD FIRMWARE AXIOO PICOpad 7H 4.4.2 atau Download Disini
    2. FLASH TOOL DOWNLOAD DISINI
    3. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    AXIOO 7H YG LAIN

    1. BUAT AXIOO PICOpad 7H MT6572 KELINK INI
    2. Flash Axioo Picopad S1 atau 7H GGB MT6582

    ABOUT 

    MESINNYA

    LOG READ VIA CM2
     FLASH VIA FLASHTOOL
    Chinese Miracle II  [MTK module] v 1.40


    Start  at : [2/13/2016 / 5:06:06 AM]
    Operation : Read Flash [ v1.40 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6582
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6582_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 15010038574D423352018B84BAE66153
    DA Stat : v4.2 on BBID : 0x87
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
    [eMMC] : FLASH_CID : 15010038574D423352018B84BAE66153
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : Axioo
    ProdName  : PICOpad 7H
    ProdModel : PICOpad 7H(7 3G)
    Device    : picopad_7h
    AndroidVer: 4.4.2 KitKat
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.11

    [Read Ok] : preloader_picopad_7h.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img

    [ScatCFG] : MT6582 / V1.1.1 / picopad_7h / EMMC
    FW Size : 934 MiB
    Scatter saved to : G:\andro3\axioo\MT6582__Axioo__PICOpad_7H(7_3G)__picopad_7h__4.4.2_KitKat__ALPS.KK1.MP1.V2.11\

    All done!

    Done!
    Elapsed: 00:04:35
    Reconnect Power/Cable!

    FLASH Axioo Picopad 4 GDS / GDK X1

    Axioo Picopad 4 GDS atau GDK X1

    Brand     : Axioo
    ProdName  : PICOpad_GDK
    ProdModel : PICOpad_GDK
    Device    : PICOpad
    AndroidVer: 4.1.2
    MTKxCPU   : MT6589
    MTKxPRJ   : ALPS.JB.SP.V1

    Firmware GDK bisa dipake untuk GDS, begitu juga sebaliknya.

    1.  Download firmwarenya STOCK ROM Axioo Picopad 4 GDK X1 atau Download Disini
    2.  Download Flash Toolnya DOWNLOAD DISINI
    3.  Driver bila belum punya instal dulu driver mtknya
    4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
    5.  File boot aja Download disini
    6. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

    NB: Nama folder pendek saja


    Start  at : [12/6/2015 / 6:50:15 PM]
    Operation : Read Flash [ v1.38 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone…
    Phone found! [ 3 ]
    Sync…
    Inital regs read done
    Boot Info :
    BB_CPU_ID : 6583
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6583|6589_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 4B0001153030534A0560034D37601271
    DA Stat : v3.2 on BBID : 0x86
    DA Sent. Configure setting now …
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , M00SJ
    [eMMC] : FLASH_CID : 1501004B4A5330304D03600571126037
    [eMMC] : FLASH_EXT : 0x00100000 , 0x00100000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    Reading Flash Conent now …

    Brand     : Axioo
    ProdName  : PICOpad_GDK
    ProdModel : PICOpad_GDK
    Device    : PICOpad
    AndroidVer: 4.1.2
    MTKxCPU   : MT6589
    MTKxPRJ   : ALPS.JB.SP.V1

    [Read Ok] : preloader_gionee89_cu_jb.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img

    [ScatCFG] : MT6589 / V1.0.0 / gionee89_cu_jb / EMMC
    FW Size : 678 MiB
    Scatter saved to : G:\InfinityBox\CM2MTK\Flash\MT6589__Axioo__PICOpad_GDK__PICOpad__4.1.2__ALPS.JB.SP.V1\

    All done!

    Done!
    Elapsed: 00:03:32
    Reconnect Power/Cable!