Flash Axioo PICOphone M2 (M) GEG SC7731

 PICOphone M4U M2 M GEG1 SW20150916

Model Name  : PICOphone_M4U_M2_M
Model Brand : Axioo
Model Device: PICOphone_M4U_M2_M
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4U_M2_M_GEG1_SW20150916
Model Ext   : PICOphone_M4U_M2_M

Cek di sticker dibawah Imei SN: GEG seperti gambar diatas
Bahan:
1. Download Firmware PAC Axioo M2 (M) GEG atau Download Disini
2. Download File Repair Axioo M2(M) atau Download Disini
2. Download Research Download R2.10
3. Driver SPD by InfinityBox
4. Turorial Flash via research here
5. Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

*Buat Axioo Picophone M2(M) GEB silahkan download dibawah :
Download Firmware PAC Axioo M2 (M) GEB atau Download Disini

Error pada research download baca disini

NOTE PENTING:
1. Buat yang Flash jalan cuman sampai FDL1 dan FDL2 kemudian cuman bengong gak jalan2, silahkan flash dulu pake file REPAIR NO. 2, dinyalakan cuman blank biru, baru flash lagi pake file NO. 1
2. Baseband unknown/tidak diketahui, silahkan flash dulu pake file REPAIR NO. 2, dinyalakan cuman blank biru, baru flash lagi pake file NO. 1

Video Flashing Axioo PICOphone M2 (M) GEG dengan Research Download

Log Read Firmware Axioo M2 M
Operation : Read FullFlash [ v1.24 ]
1. Remove battery. Insert battery back
2. Press and hold ‘VolumeUp’ and ‘VolumeDown’ keys
3. Insert cable
 ====  Wait for phone…
Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!
– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

– > Wait phone connected …

Phone found! [ 34 ]
Port Opened
Sync…
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync…
Sending FDL
[Info] : If SW freeze here more, than 15 seconds – remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : PICOphone_M4U_M2_M
Model Brand : Axioo
Model Device: PICOphone_M4U_M2_M
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_HDR
Project Ver : PICOphone_M4U_M2_M_GEG1_SW20150916
Model Ext   : PICOphone_M4U_M2_M

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now …

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.28.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1937 MiB
Saved to : E:\andro 1\axioo\m2m GEG\SP7731GEA_HDR_PICOphone_M4U_M2_M_5.1_PICOphone_M4U_M2_M_GEG1_SW20150916_PICOphone_M4U_M2_M\
Done!

FLASH AXIOO PICOPHONE 4 GDF

Brand     : Axioo
ProdName  : PICOphone_4
ProdModel : PICOphone_4
Device    : PICOphone
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

FLASH AXIOO PICOPHONE 4 GDF

Bahan :

  1.  Download firmwarenya Axioo PICOphone 4 GDF 4.2.2 ALPS.JB3.MP.V1.zip
  2.  Download Flash Toolnya DOWNLOAD DISINI
  3.  Driver bila belum punya instal dulu driver mtknya
  4.  Untuk tutorial flash via Flash tool bisa dilihat DISINI
  5.  SCATTER ONLY
  6.  Konfirmasi pass sms only 0822-1163-1565 (nomor ini hanya buat konfirmasi, BUKAN YANG DI ISI) , Mahar pulsa 10k

FLASH VIA FLASHTOOL

LOG READ FLASH AXIOO PICOPHONE 4 GDF VIA CM2

Start  at : [2/12/2016 / 11:16:47 PM]
Operation : Read Flash [ v1.40 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 3 ]
Sync…
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v5.1540.01.01
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728056E56D3B0E1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now …
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , G40ME
[eMMC] : FLASH_CID : 45010053454D30344728056E56D3B0E1
[eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now …

Brand     : Axioo
ProdName  : PICOphone_4
ProdModel : PICOphone_4
Device    : PICOphone
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1

[Read Ok] : preloader_k298.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / k298 / EMMC
FW Size : 688 MiB
Scatter saved to : G:\andro3\axioo\MT6572__Axioo__PICOphone_4__PICOphone__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:03:47
Reconnect Power/Cable!

Finish at : [2/12/2016 / 11:20:34 PM]